MSI C 770-c45 Manual

2
MS-7599

Led Status indicators (optional)
Blue lightoff
Led   Led2   Led   Led4 Mode
                                CPu is in  phase power mode.
                                 CPu is in 4 phase power mode.  

22

BioS SetuP
Power  on  the  computer  and  the  system  will  start  PoSt  (Power on  Self test) 
process.  When  the  message  below  appears  on  the  screen,  press    key  to 
enter Setup.
Press deL to enter SetuP
if the message disappears before you respond and you still wish to enter Setup, 
restart  the  system  by  turning  it  oFF  and on  or  pressing  the  ReSet  button.  you 
may  also  restart  the  system  by  simultaneously  pressing  ,  ,  and   keys.
Main Page
Standard CMoS Features...

2
MS-7599

M-Flash
use  this  menu  to  read/  flash  the  BioS  from  storage  drive  (Fat/  Fat2  format 
only). 
Load Fail-Safe defaults
use this menu to load the BioS default values that are factory settings for system 
operations.
Load optimized defaults
use  this  menu  to  load  factory  default  settings  into  the  BioS  for  stable  system 
performance operations.
Save & exit Setup
Save changes to CMoS and exit setup.
exit Without Saving
abandon all changes and exit setup.
Cell Menu...

24

CPu Specifications
Press    to  enter  the  sub-menu. this  submenu  shows  the  information  of 
installed CPu.
CPu technology Support
Press  to enter the sub-menu.  this sub-menu shows the technologies 
that the installed CPu supported.
aMd Cool’n’quiet
the  Cool’n’quiet  technology  can  effectively  and  dynamically  lower  CPu  speed 
and  power consumption.
iMPoRtant
to  ensure  that  Cool’n’quiet  function  is  ac
-tivated  and  will  be  working  properly,  it  is required to double confirm...

25
MS-7599

MultiStep oC Booster
this item is used to avoid the BioS might crash with overclocking. disabled  disable this item, apply oC settings during PoSt.
Mode   Slight oC during PoSt and then apply full oC when loading the  
  oS   
Mode 2  Load the oS then apply the oC settings.
Memory-Z
Press  to enter the sub-menu.
diMM~4 Memory SPd information
Press  to enter the sub-menu.  this sub-menu displays the informations 
of installed memory.
advance dRaM Configuration
Press  to enter the...

26

FSB/dRaM Ratio
this item will allow you to adjust the ratio of FSB to memory.
adjusted dRaM Frequency (MHz)
it shows the adjusted memory frequency. Read-only.
Ht Link Speed
this item allows you to set the Hyper-transport Link speed. Setting to [auto], the 
system will detect the Ht link speed automatically.
adjusted Ht Link Frequency (MHz)
it shows the adjusted Ht link frequency. Read-only.
adjust PCi-e Frequency (MHz)
this item allows you to adjust the PCi-e frequency.
auto disable dRaM/PCi...

27
MS-7599

Load optimized defaults
you can load the default values provided by the mainboard manufacturer for the 
stable performance. 

28 

29
MS-7599
한국어
시작하기
770-C5/  770-C45  시리즈  (MS-7599  v.x) atX  메인보드를  선택해주셔서  감사
합니다.  770-C5/  770-C45  시리즈는  최적의  시스템  효율을  위해 aMd®  770  & SB70/  SB750/  SB700  칩셋에  기반을  둔  제품입니다.  고급의 aMd®  aM 프로세
서에 적합하게 디자인된 770-C5/ 770-C45 시리즈는 고성능과 전문적인 데스크톱 
플랫폼 솔루션을 제공합니다.
레이아웃 

0

지원되는 프로세서aM 패키지의 aMd® athlon™ X2/ X/ X4 & Phenom™ii X/ X4 프로세서(CPu에 대한 최신 정보는http://www.msi.com/index.php?func=cpuform2 참조)
HypertransportHypertransport™ .0 최대 5.2 Gt/s 지원
칩셋노스 브릿지: aMd® 770 칩셋
사우스 브릿지: aMd® SB70/ SB750 (옵션)/ SB700 (옵션) 칩셋
지원되는 메모리 ddR 800/ 066/ / 600*(oC) SdRaM ( 합계 최대 6GB)
4 ddR diMMs (240핀/ .5V)
(* oC = overclocking, 호환 가능한 부품에 대한 자세한 내용은http://www.msi.com/index.php?func=testreport 를 참조하십시오.)
LanPCie...