Multitech Multivoip 100 Model Mvp110 Standalone Voice/ip Gateway Quick Start Guide

31 Configure Client MultiVOIPs
Deploying the VOIP Network
Deploying the VOIP network involves the VOIP Administrator
developing the VOIP Dialing Directory and deploying the pre-
configured client MultiVOIPs to their remote sites.  The remote
site administrators need only connect power to the pre-
configured MultiVOIP, connect it to their Ethernet LAN and
predefined telephone equipment, and then wait for the phone
directory database to be downloaded.
Perform the following procedure to deploy your VOIP...

MultiVOIP Quick Start Guide
32Remote Site Administrator
3. Unpack your MultiVOIP.
4. Connect one end of the power supply to a live AC outlet
and connect the other end to the Power connection on
your MultiVOIP.








   	
  !	#
      

Figure 5.  Remote Site Cable Connection
5. Connect a network cable to the ETHERNET 10Base-T
(RJ-45) connector on the back of your MultiVOIP.
6. If you are connecting a station device such as an...

33 Deploy VOIP Network
Limited Warranty
Multi-Tech Systems, Inc. (“MTS”) warrants that its products will
be free from defects in material or workmanship for a period of
two years from the date of purchase, or if proof of purchase is
not provided, two years from date of shipment. MTS MAKES
NO OTHER WARRANTY, EXPRESSED OR IMPLIED, AND
ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS  FOR A  PARTICULAR  PURPOSE ARE  HEREBY
DISCLAIMED.  This warranty does not apply to any products
which have been...

MultiVOIP Quick Start Guide
34
Technical Support
Multi-Tech Systems has an excellent staff of technical support
personnel available to help you get the most out of your Multi-
Tech product.  If you have any questions about the operation
of this unit, or experience difficulty during installation you can
contact Tech Support via the following:
Contacting Technical Support
Country By E-mail By
telephone
France: [email protected]             (33) 1-64 61 09 81
India: [email protected] (91)...

35 Warranty and Regulatory Information
FCC Declaration
NOTE: This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules.  These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment.  This equipment
generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause
harmful...

82050750