Multitech Multivoip 100 Model Mvp110 Voice/fax Over Ip Networks User Guide

51 Chapter 4 - MultiVOIP Software
The Phone Directory Database in a H.323 Gatekeeper network only displays the station information
and station identification of the local unit.  The station information and identification have to be
entered in conjunction with the Gatekeeper administrator so that the identification of the endpoint is
the same.  To add an entry to the Phone Directory Database, click  Add and the Add/Edit Phone
Entry dialog box displays.
The Add/Edit Phone Entry dialog box contains two...

52 Chapter 4 - MultiVOIP Software
defined by the Gatekeeper.  The registration method is determined by the Gatekeeper administrator
and will require communication with each endpoint in order to develop the H.323 compatiable
network.
The Phone Directory Database for the local unit contains the local phone numbers, destination details
of the IP address, port number, and channel number of the local unit.  The description is the same as
the entry in the H323 ID entry in the Add/Edit Phone Entry dialog box....

53 Chapter 4 - MultiVOIP Software
support this feature. If so, enable this function.
The Frame Type list enables you to change the Ethernet Frame Type so that it matches your IP
network.  If the current entry does not match your IP network, select the Frame Type from the Frame
Type list. The Frame Type choices are TYPE_II and SNAP.
The Port Address group enables you to change the unique IP Address and IP Mask of the local
LAN.
The Gateway Address group enables you to change the gateway IP Address of the...

54 Chapter 4 - MultiVOIP Software
Applications Setup
Clicking Others on the Setup menu displays the Applications Setup dialog box. This dialog box
allows you to enable SNMP Agent (the default is disabled) and set up all the necessary parameters;
enable or disable various remote configuration methods such as TFTP (Trivial File Transfer Protocol)
Server, Web Server, Dumb Terminal Management, and Telnet Server; and assign a Password to the
MVP110 for Internet security. These applications enable remote...

55 Chapter 4 - MultiVOIP Software
Viewing Statistics
The Statistics dialog box enables you to view statistics for major events of the MVP110 operation.
This dialog box is accessed by clicking Statistics on the MVP110 Main menu.
The Voice Channel statistics shows the attempted and completed calls, call duration, average call
length, bytes/packets sent and received. These statistics can be a helpful troubleshooting tool.
IP Statistics
IP is a connection-less network protocol residing in the network layer...

56 Chapter 4 - MultiVOIP Software
established.  If not, that may indicate the web server is not enabled.  Or, if you were having problems
establishing a remote connection through TFTP, you could look in the UDP section to see if any
packets are being received.  If not, you may need to review your network addressing.
SNMP Statistics
The SNMP Statistics dialog box provides statistical information on Simple Network Management
Protocol (SNMP).
SNMP is an application layer protocol that facilitates the...

57 Chapter 4 - MultiVOIP Software
The Log Entries dialog box displays each call as a sequentially numbered Event with the date, time,
duration of the call, the status of the call (Successful or Unsuccessful), Mode (Voice  or Fax), and the
from and to numbers.
Viewing Log Entry Details
The Log Entry Details dialog box displays the status of a completed call.  This dialog box displays
the same details as the Call Progress dialog box after a call is completed.
Viewing Channel Totals
The Channel Totals...

58 Chapter 4 - MultiVOIP Software
Reports
A report of the contents of the Log Entries dialog box can be generated using the Windows Notepad
accessory and then printed from your local PC.  The report is generated by entering the To and From
dates in the Report Generation dialog box and then clicking Generate. This function provides a hard
copy of the Log Entries dialog box.   

59 Chapter 4 - MultiVOIP Software
Upgrade Procedures
Whenever you upgrade your version of the MVP110 software, you must first install the new software
on your PC. Then use the Upgrade Software function, or download the Firmware, the Factory
Defaults, the Voice Coders, and the H.323 stack to upgrade the MVP110 itself.
Before starting the upgrade process, view the current configuration and write down important data
such as your IP address, and voice channel configurations; these settings must be put back...

60 Chapter 4 - MultiVOIP Software
Enter your current configuration in the Channel Setup dialog box.
Click OK when finished.
Click OK.  The MultiVOIP firmware, coders, and H.323 stack are downloaded, then the MVP110
reboots.
Except for downloading the Boot Code, upgraded versions of the other files (firmware, coders, and
H.323 stack) can be downloaded individually using the following manual procedures.