Home > Multitech > Communications System > Multitech Multivoip 100 Model Mvp120 Voice/fax Over Ip Networks User Guide

Multitech Multivoip 100 Model Mvp120 Voice/fax Over Ip Networks User Guide

Here you can view all the pages of manual Multitech Multivoip 100 Model Mvp120 Voice/fax Over Ip Networks User Guide. The Multitech manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 11

11 Chapter 1 - Introduction to the MultiVOIP Multi-Tech Systems, Inc. MultiVOIP User Guide
 Again, the corporate MultiVOIP IP Address needs to be added. The port number is 1720.
This adds phone number 101 of the corporate MultiVOIP to the proprietary database.
After you have added Channel 1, you need to include Channel 1 at the remote branch office.
The proprietary database would then appear as in the following dialog box and when the
remote branch office MultiVOIP is turned on, the current database...

Page 12

12 Chapter 1 - Introduction to the MultiVOIP Multi-Tech Systems, Inc. MultiVOIP User Guide
Similarly, if a person at the Remote Sales office picked up extension 201 and dialed
extension 101, the MultiVOIP at the Sales Office would generate a second dial tone and the
person at the Remote Sales office would then dial any extension at the Sales Office, or the
person could then dial a 9, for example, and get an outside line of the Sales Office Public
Switched Telephone network. This person could then dial...

Page 13

13 Chapter 1 - Introduction to the MultiVOIP Multi-Tech Systems, Inc. MultiVOIP User Guide
Back Panel Description
The cable connections for the MVP120 are made at the back panel. Connectors include
Power, Ethernet, Command Port (RJ-45),  and FXO Voice/Fax Channel. The cable
connectors are shown and defined belos.

!!	!#
$%&()
!! *+!
$,-	.)
!!+!
$%&,,)
!!
11!!#81
                                                        Back Panel...

Page 14

14 Chapter 1 - Introduction to the MultiVOIP Multi-Tech Systems, Inc. MultiVOIP User Guide
Specifications
 One 4 MB DRAM  (1 Meg by 32-bit, 70 nanosecond SIMM)
Caution: SIMM speed and size cannot be mixed
 Two Megabytes of flash memory
Ethernet Port
 Single Ethernet Interface - 10Base-T (twisted pair) keyed RJ-45 connector.
Command Port
 Single 19.2 Kbps asynchronous Command Port using an RJ-45 to DB9 cable with a DB9
female connector
Voice/Fax Channel
 One RJ-11 jack (FXO)
Power Supply
 Voltage -...

Page 15


	


Chapter 2
Installation 

Page 16

16 Chapter 2 - InstallationMulti-Tech Systems, Inc. MultiVOIP User Guide
Chapter 2 - Installation
Overview of the Installation Process
The basic steps of installing your MVP120 network involve unpacking the units, connecting
the cables, and configuring (Configuring is discussed in detail in Chapter 3) the units using
the included management software (MultiVOIP Configuration). The recommended installation
process includes four phases that, when completed, result in a fully functional Voice Over IP...

Page 17

17 Chapter 2 - InstallationMulti-Tech Systems, Inc. MultiVOIP User Guide
Unpacking Your MVP120
Remove all items from the box.
/0*
11/0*
11
	




	5 (*		,

                                                Unpacking
Telecom Safety Warning
1. Never install phone wiring during a lightning storm.
2. Never install phone jacks in wet locations unless the jacks are designed for wet
locations.
3. This product is to be used with UL and cUL listed computers.
4. Never touch...

Page 18

18 Chapter 2 - InstallationMulti-Tech Systems, Inc. MultiVOIP User Guide
Cabling Your MVP120
Cabling your MVP120 involves making the proper Power, Command Port, and Network
connections. The graphic below shows the back panel connectors and the associated cable
connections. The Cabling Procedure section provides step-by-step instructions for cabling
your MVP120.
11!!#81
                                      Cable Connections
Cabling Procedure
1. Using the supplied cable, connect...

Page 19


	


Chapter 3
Installing the MVP120 Software 

Page 20

20 Chapter 3 - Installing the MVP120 SoftwareMulti-Tech Systems, Inc. MultiVOIP User Guide
Chapter 3 - Installing the MVP120 Software
The section covers the software installation. Note that not every screen or option in the
process is included in this chapter. Additional information on the MVP120 software is
provided in Chapter 4 and Chapter 5 and in the online Help.
Note: The phonebook directory configuration process is different depending on whether or
not you have an enabled H.323 Gatekeeper resident...
Start reading Multitech Multivoip 100 Model Mvp120 Voice/fax Over Ip Networks User Guide

Related Manuals for Multitech Multivoip 100 Model Mvp120 Voice/fax Over Ip Networks User Guide

All Multitech manuals