Namco Cyber Cycles Dx Operators Manual

Part No. 90500039
Operators Manual
IT IS THE RESPONSIBILITY OF THE OPERATOR TO MAINTAIN CUSTOMER SAFETY AT
ALL
 TIMES, AND IT IS IMPERATIVE THAT THE DETAILS SET OUT IN THIS MANUAL
ARE
 FOLLOWED PRECISELY.
CYBER CYCLES DX 

SAFETY WARNING
In Order to Use This Machine Safely
In order to use this machine safely, be sure to read this Operators Manual carefully
before installation and use of the machine. Whenever the owner of this machine entrusts disassembly, installation, adjustment,
routine maintenance or trouble shooting to another person, the owner sho\
uld ensure 
that they read the appropriate precautions and relevant sections of this\
 manual before
starting work. In order that no accidents occur when the machine is in...

Page 4
1. SPECIFICATIONS
POWER SUPPLY :-220/240volts AC
 MONITOR :-Philips 46 Rear Projection
COIN ACCEPTORMars CashFlow - 4 Channel
DIMENSIONS :-
Assembled 2180(w) x 2640(d) x 2530(h)
Cabinet 1090(w) x 1270(d) x 1930(h) ea.
Bike Assy 910(w) x 1370(d) x 930(h) ea.
Coin Tower 480(w) x 640(d) x 930(h)
Header 1450(w) x 230(d) x 600(h)
WEIGHT :-
Assembled 500kg
Cabinet 160kg ea.
Bike Assy 65kg ea.
Coin Tower25kg
Header25kg
ACCESSORIES :-Keys: (Cash Door) ..................... 2
(Coin Door)...

Page 5
2. MAJOR COMPONENTS 

Page 6
3. PRECAUTIONS
Be sure to read this section carefully.
3-1 Notes on Operation
NOTE:Only operate this machine after checking that it has been installed corr\
ectly 
and in accordance with the manual.
NOTE:Parts of this machine move during game play, so there are places where the 
distance between the stationary section and moveable section changes.
There is a warning sticker that the player must be able to reach the gre\
y
matting of the bike base with their feet, however if the operator feels \...

Page 7
3-3 Cautions When Installing.
1. This machine is designed for indoor use only. 
Do Not  install the machine in the
following places
2. If this machine is installed next to walls or other machines, ensure tha\
t there is plenty of space between them. 

Page 8
NOTE:So that customers are not injured by the movement of the bikes, ensure that
the machine is separated from walls or other machines by at least 300mm
either side and 600mm from the rear of the bikes.
NOTE:In order to gain access to the mains-in connector, ON/OFF switch and link
switches, make sure that the rear of the machine is separated from a wall or
other machine by a distance of at least 500mm or more. 

Page 9
3-4 Cautions when Handling.
DANGERThe Mains Voltage to this machine must be within the range of
220v to 240v AC.
DANGERBe sure that the power is turned  OFF when replacing parts and
connecting/disconnecting connectors.
DANGERTo prevent possible electric shocks due to failure, this machine  MUST
be fitted with a securely connected earthed plug.
DANGERThe monitor and power supply contain areas of very high voltage. Be
extremely careful when inspecting or making adjustments.
DANGERWhen unplugging the...

Page 10 4-2 Assembling the Coin Tower
1. Connect the loom connectors of the coin tower and right hand cabinet (viewed
from the front).
2. Place the Coin Tower on to the two U brackets of the main cabinet, and push
fully towards the cabinet, taking care not to trap any wires.
2. Open the coin door and fit the 4off M8x60 hex head screws, spring and flat
washers to clamp the coin tower to the main cabinets.
4. INSTALLATION
4-1 Assembling the Monitor Cabinets
1. Remove the two rear panels from the right hand...

Page 11 4-3 Connecting the Bike Assemblies to the Cabinets
1. Connect the connectors
between the bike assembly
and cabinet.
2. Place the bike assembly
onto the support bracket and
push the bike against the
cabinet taking care not to
trap any wires.
3. Fit, finger tight, the 4off
M8x40 security screws,
spring washers and flat
washers, securing the bike
to the cabinet.
4. Fit, finger tight, the 2off
M8x20 security screws,
spring washers and flat
washers, securing the bike
to the support bracket.
5. Tighten...