Namco Cyber Cycles Dx Operators Manual

Page 22
m e t Ino i t p i r c s e D
g n i t t e S o t u A ) a (. y l l a c i t a m o t u a h c t a m o t s t i n u d e k n i l l l a t s u j d a l l i W
e z i l a i t i n I y r o m e M p U k c a B ) b (at a d S D A l l a t e s e R
t s e T B C P ) c (BC P e m a G e h t g n i t s e t r o F
OTHERS
AUTO SETTING ................ (a)
BACK UP MEMORY INITIALIZE ................ (b)
PCB TEST ................ (c)
EXIT
BANK :CHOOSE
VIEW-SW:ENTER 6-3-7 Others
1. Select item (6) Others on the menu screen.
2. On...

Page 23
IN OUTIN OUT
6-4 Linking Two Machines.Up to two machines (4 bikes) can be linked together. 
The machines should be linked as described below. 
1) Ensure that the 
power is “OFF”.
2) Loosen the two screws (M5x12) on the back of the right monitor cabinet\
, and remove the connector cover.
3) Set the link switches to “ON” , “EXT”, and “ON”. (See Diag.)
4) Use the supplied link cable and connect the machines between “IN” and “OUT” sockets 
(See Diag.)
[Examples of Linked Machines] 
a) 2 Machines (4...

Page 24 6-4-1 Setting the Link Switches
The link switches are used to set the connection between seats and machines.
1). Setting only one machine (2 bikes)
Set the link switches to “ON”, “INT”, and
“ON”.
Note: Do not use a link cable.
2) Setting two or more machines.
Set the link switches to “ON”, “EXT”, and
“ON”.
3) Install the connector cover using
the two screws (M5x12).
The link procedure is now complete.
4) Setting for faulty PCB.
If the game PCB of only one bike is faulty, set the link on that bike...

Page 25
7. MAINTENANCE
DANGER: In order to prevent injury or electric shock to service personnel, ensure
that the MAIN POWER IS OFF before attempting any maintenance.
DANGER: Before performing any work not described in this manual, be sure to
contact your distributor to receive instructions or answers to questions.
7-1 Replacing the Fluorescent Tube, Position, and Leading Driver Lamps
1) Remove the three security screws (M5x12), and remove the plexi upper retaining
bracket.
2) Remove the three security...

Page 26
7-3 Handle Bar Assembly
Remove four M5X12 security screws, and remove handle bar assembly cover \
to gain 
access to the throttle and brake controls.
NOTE:- The game must be re-initialized whenever the PCB, ROMS, Throttle, Brake or
Steering controls are replaced. 
(See 7-4 Adjustments when Replacing Parts)
7-3-1 Replacing  the Throttle Control Pot 1) Slacken the grub screwM3X5 securing the 
control pot shaft to the
drive gear, and remove
the gear.
2) Replace the control pot ensuring that the...

Page 27 7-3-3 Replacing the Steering Control Pot
1) Remove three security screws (M5X16) and four security screws (M5x12)
from the right hand bike vac-form, and remove the vac-form.
2) Slacken the grub screw (M4x5) to release the control pot shaft.
3) Replace the control pot, taking care that the wires are fitted to the correct
terminals.
4) Re-tighten the grub screw (M4x5), ensuring that it engages the flat of the
control pot shaft.
5) Refit the bike vac-form, and the security screws (M5x12) (M5x16). 

Page 28
7-4 Adjustments When Replacing Parts (Initialization)
The following adjustments must always be carried out after replacing the\
 Game PCB, 
ROMS, or Throttle, Brake, and Steering Control Pots.
The game will not operate correctly if these adjustments are not made. 
1. Ensure that the Throttle and Brake are fully released and the bike is in\
 its central upright position.
2. Turn the Test switch on while pressing the Service switch. The following screen will be displayed.
3. Adjustment is complete...

Page 29
8. PARTS 

Page 30
M E T INO I T P I R C S E D.o N T R A P
1RO T I N O M N O I T C E J O R P R A E R  6 4 S P I L I H P3 0 0 0 0 0 4 8
2SS A L G T N O R F4 7 0 0 0 1 7 3
3)O G O L O C M A N / W ( E L L I R G R E K A E P S D U O L7 5 5 0 0 0 5 4
4PO T - N O I S N E T X E T E K C A R B R E V O C S U S2 6 5 0 0 0 5 4
5YL B M E S S A N O T T U B H S U P  T I L N E H W E L B A L I A V A T I D E R C5 1 2 0 0 2 0 6
6SH L - T N O R F N O I S N E T X E T E K C A R B R E V O C S U S6 5 5 0 0 0 5 4
8PO T - R E W O T N I O C T...

Page 31