NEC Attendant Console Statistics Operations Manual

							NDA-30122   Revision 1 Page 113
Attendant Console Statistics Operations Manual ADMINISTRATION MENU
Log File Display (Cont.)
Report Generator 
Log Files (Cont.)
Figure 9-13   Report Generator Log Files Data Screen
The Report Generator Log File Data screen shows the data log entries for the 
specified report generator log file.
Screen Options
Various options are available at this screen:
Search–Use the Search option to find specific text in the file. Press 
the ’S’ key and press Enter. At the prompt enter the text 
value to search and press Enter. The found text will be 
shown on the screen in highlight. All occurrences of the 
found text will be shown.
To p / B o t t o m–
Use the 
To p  option to move to the beginning of the file and 
the 
Bottom option to move to the end of the file. Press the 
’
T’ or ’
B’ keys and press 
Enter. (The UP and DOWN arrow 
keys can also be used to scroll the file line-by-line.)
Command–Use the Command option to enter commands directly in the 
UNIX environment. Press the ’C’ key and press Enter to 
access UNIX. Enter the appropriate UNIX command at the 
prompt and press Enter.
Print–
Type ’
P’ and press 
Enter to select the 
Print command. At 
the prompt, type ’
F’ to print the whole file or ’
S’ to print just 
the screen and press 
Enter. (Press Esc to return the cursor to 
the command line, cancelling the print request.) 
						

							ADMINISTRATION MENU Attendant Console Statistics Operations Manual
Page 114 NDA-30122   Revision 1
Log File Display (Cont.)
Report Generator 
Log Files (Cont.)Screen Options (Cont.)
Autoscroll–The reflects real-time activity in the file when it is in 
AutoScroll mode. Press the ’A’ key and press Enter to 
toggle the AutoScroll option on and off. In Aut o S cro ll  
mode (shown by the notation A–S in the bottom right corner 
of the screen) new messages are scrolled onto the screen as 
they occur and are added to the file.
Quit–The Quit option exits the Menu Log File Data screen and 
the Menu Log File menu is displayed. Press the ’Q’ key and 
Enter to exit this screen. 
						

							ADMINISTRATION MENU Attendant Console Statistics Operations Manual
Page 115 NDA-30122   Revision 1
Log File Display (Cont.)
Statistic Logger 
Log FilesThe Statistic Logger Log Files option is used to access the files that contain process 
and error messages occurring during statistic logging.
Step 1:
From the Log File Display screen (Figure 9-9), press the ’S’ key and 
press Enter. The Statistic Logger Log Files screen (Figure 9-14) will be 
displayed.
Figure 9-14   Statistic Logger Log Files Screen
Step 2:
The display shows the available statistic logger log files listed on the left 
of the screen. At the prompt, enter the filename of the statistic logger log 
file to view, and press Enter. The specified statistic logger log file data 
will be displayed (Figure 9-15). 
						

							ADMINISTRATION MENU Attendant Console Statistics Operations Manual
Page 116 NDA-30122   Revision 1
Log File Display (Cont.)
Statistic Logger 
Log Files (Cont.)
Figure 9-15   Statistic Logger Log Files Data Screen
The Statistic Logger Log File Data screen shows the data log entries for the 
specified statistic logger log file.
Screen Options
Various options are available at this screen:
Search–Use the Search option to find specific text in the file. Press 
the ’S’ key and press Enter. At the prompt enter the text 
value to search and press Enter. The found text will be 
shown on the screen in highlight. All occurrences of the 
found text will be shown.
To p / B o t t o m–
Use the 
To p  option to move to the beginning of the file and 
the 
Bottom option to move to the end of the file. Press the 
’
T’ or ’
B’ keys and press 
Enter. (The UP and DOWN arrow 
keys can also be used to scroll the file line-by-line.)
Command–Use the Command option to enter commands directly in the 
UNIX environment. Press the ’C’ key and press Enter to 
access UNIX. Enter the appropriate UNIX command at the 
prompt and press Enter.
Print–
Type ’
P’ and press 
Enter to select the 
Print command. At 
the prompt, type ’
F’ to print the whole file or ’
S’ to print just 
the screen and press 
Enter. (Press Esc to return the cursor to 
the command line, cancelling the print request.) 
						

							NDA-30122   Revision 1 Page 117
Attendant Console Statistics Operations Manual ADMINISTRATION MENU
Log File Display (Cont.)
Statistic Logger 
Log Files (Cont.)Screen Options (Cont.)
Autoscroll–The reflects real-time activity in the file when it is in 
AutoScroll mode. Press the ’A’ key and press Enter to 
toggle the AutoScroll option on and off. In Aut o S cro ll  
mode (shown by the notation A–S in the bottom right corner 
of the screen) new messages are scrolled onto the screen as 
they occur and are added to the file.
Quit–The Quit option exits the Menu Log File Data screen and 
the Menu Log File menu is displayed. Press the ’Q’ key and 
Enter to exit this screen. 
						

							Page 118 NDA-30122   Revision 1
ADMINISTRATION MENU Attendant Console Statistics Operations Manual
Log File Display (Cont.)
Patroller Log FilesThe Patroller Log Files option is used to access the files that contain process and 
error messages occurring during patroller logging.
Step 1:
From the Log File Display screen (Figure 9-9), press the ’P’ key and 
press Enter. The Patroller Log Files screen (Figure 9-16) will be 
displayed.
Figure 9-16   Patroller Log Files Screen
Step 2:
The display shows the available patroller log files listed on the left of the 
screen. At the prompt, enter the filename of the patroller log file to view, 
and press Enter. The specified patroller log file data will be displayed 
(Figure 9-17). 
						

							NDA-30122   Revision 1 Page 119
Attendant Console Statistics Operations Manual ADMINISTRATION MENU
Log File Display (Cont.)
Patroller Log Files 
(Cont.)
Figure 9-17   Patroller Log Files Data Screen
The Patroller Log File Data screen shows the data log entries for the specified 
patroller log file.
Screen Options
Various options are available at this screen:
Search–Use the Search option to find specific text in the file. Press 
the ’S’ key and press Enter. At the prompt enter the text 
value to search and press Enter. The found text will be 
shown on the screen in highlight. All occurrences of the 
found text will be shown.
To p / B o t t o m–
Use the 
To p  option to move to the beginning of the file and 
the 
Bottom option to move to the end of the file. Press the 
’
T’ or ’
B’ keys and press 
Enter. (The UP and DOWN arrow 
keys can also be used to scroll the file line-by-line.)
Command–Use the Command option to enter commands directly in the 
UNIX environment. Press the ’C’ key and press Enter to 
access UNIX. Enter the appropriate UNIX command at the 
prompt and press Enter.
Print–
Type ’
P’ and press 
Enter to select the 
Print command. At 
the prompt, type ’
F’ to print the whole file or ’
S’ to print just 
the screen and press 
Enter. (Press Esc to return the cursor to 
the command line, cancelling the print request.) 
						

							Page 120 NDA-30122   Revision 1
ADMINISTRATION MENU Attendant Console Statistics Operations Manual
Log File Display (Cont.)
Patroller Log Files 
(Cont.)Screen Options (Cont.)
Autoscroll–The reflects real-time activity in the file when it is in 
AutoScroll mode. Press the ’A’ key and press Enter to 
toggle the AutoScroll option on and off. In Aut o S cro ll  
mode (shown by the notation A–S in the bottom right corner 
of the screen) new messages are scrolled onto the screen as 
they occur and are added to the file.
Quit–The Quit option exits the Menu Log File Data screen and 
the Menu Log File menu is displayed. Press the ’Q’ key and 
Enter to exit this screen. 
						

							NDA-30122   Revision 1 Page 121
Attendant Console Statistics Operations Manual ADMINISTRATION MENU
UNIX
The UNIX option on the Console Statistics Administration Menu is used to access 
the UNIX operating system directly.
Enter UNIX SystemStep 1:
From the Administration Main Menu (Figure 9-1), press the ’U’ key and 
press Enter to select the UNIX option. The current UNIX system prompt 
will be displayed.
Step 2:
At the UNIX prompt, enter the desired UNIX command.
Exit UNIX SystemWhen ready to exit the UNIX operating system, enter ’statsadm’ and press Enter 
to return to the Console Stats Administration Menu. 
						

							Page 122 NDA-30122   Revision 1
ADMINISTRATION MENU Attendant Console Statistics Operations Manual
Logout
The Logout menu option will exit the Console Stats Administration Menu.
From the Administration Main Menu (Figure 9-1), press the ’L’ key and press 
Enter to select the Logout option. The Console Stats Administration Menu will 
exit.