NEC E321, E421 Tv Users Manual

							User’s Manual
E321
E421 
						

							Safety Instructions
This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the 
FCC Rule. These limits are designed to provide reasonable protection 
against harmful interference in a residential  
installation. This equipment generates, use and can radiate radio 
frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio 
communications. However there is no  
guarantee that interference will not occur in particular installation. If this 
equipment does cause harmful interference  
to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encourage to try to correct the 
interference by one or more of the following measures:
*Reorient or relocate the receiving antenna.
*Increase the separation between the equipment and receiver.
*Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.
*Consult the dealer or an experienced radio/TV technician for help.
This device compiles with Part 15 of the FCC Rules. Operation is subject 
to the following two conditions:
(1) This device may be not cause harmful interference.
(2) this device must accept any interference received, including 
interference that may cause undesired
operation.
FCC CAUTION:
To assure continued compliance and possible undesirable interference, 
the provided ferrite cores must be used when connecting this LCD display 
to video equipment; and maintain at least 400mm spacing to other 
peripheral device.
CANADIAN NOTICE:
This Class B digital apparatus compiles with Canadian ICES-003
FCC STATEMENT 
						

							Index
Declaration of Conformity ................................................................. English-01
Important Information  ....................................................................... English-02
Precautions and Reminders  ............................................................. English-05
Important Safety Instructions  ............................................................ English-06
Preparation    ................................................................................... English-08 
  Preparing Your LCD Display For Wall Mounting  ..................... English-08
Source Connection Guide  ................................................................ English-10
Operating Instructions  ...................................................................... English-11 
  Using the Side Panel Controls  ................................................ English-11
  Using the Remote Control  ....................................................... English-12
  Navigating The On-Screen Menu  ............................................ English-14 
  Video Menu  ............................................................................. English-14 
  Audio Menu  ............................................................................. English-15 
  Feature Menu  .......................................................................... English-16 
  Channel Menu  ......................................................................... English-20 
  VGA Menu  ............................................................................... English-21
  Tips     ................................................................................... English-21
Product Specification 32” (E321)  ...................................................... English-23
Product Specification 42” (E421)  ...................................................... English-25
Before Calling Service  ...................................................................... English-27
Glossary     ................................................................................... English-28
Warranty     ................................................................................... English-29
References    ................................................................................... English-30
www.necdisplaysolutions.com 
						

							English-1
English
DECLARATION OF CONFORMITY
This device complies with Part 15 of FCC Rules. Operation is subject to the 
following two conditions. (1) This device may not cause harmful interference, 
and (2) this device must accept any interference received, including 
interference that may cause undesired operation.
U.S. Responsible Party: NEC Display Solutions of America, Inc.  
Address:    500 Park Boulevard, Suite 1100  
      Itasca, Illinois 60143 
Tel. No.:     (630) 467-3000
Type of Product:    Display Monitor
Equipment Classification:  Class B Peripheral
Model:      E321
      E421
We hereby declare that the equipment specified above  
conforms to the technical standards as specified in the FCC Rules.
Canadian Department of Communications Compliance Statement
DOC:  This Class B digital apparatus meets all requirements of the 
Canadian Interference-Causing Equipment Regulations.
C-UL:  Bears the C-UL Mark and is in compliance with Canadian Safety 
Regulations according to CAN/CSA C22.2 No. 60950-1.
FCC Information
1.  Use the attached specified cables with the E321/E421 colour monitor so as 
not to interfere with radio and television reception.
  (1) Please use the supplied power cord or equivalent to ensure FCC 
compliance.
  (2) Please use the supplied shielded video signal cable, Mini D-SUB 15 pin 
to Mini D-SUB 15 pin.
2. This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part 15 of the FCC  Rules. These limits 
are designed to provide reasonable protection against harmful interference 
in a residential installation. This  equipment generates, uses, and can radiate 
radio frequency energy, and, if not installed and used in accordance with 
the  instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the  interference by one  or 
more of the following measures:  
						

							English-2English-3
Important Information
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS 
UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S 
POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR 
OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH 
VOLTAGE COMPONENTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
  • Reorient or relocate the receiving display.
  • Increase the separation between the equipment and display.
  • Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.
  • Consult your dealer or an experienced radio/ display technician for help.
If necessary, the user should contact the dealer or an experienced radio/tele -
vision technician for additional suggestions. The user may find the following 
booklet, prepared by the Federal Communications Commission, helpful: “How 
to Identify and Resolve Radio- display Interference Problems.” This booklet is 
available from the U.S. Government Printing Office, Washington, D.C., 20402, 
Stock No. 004-000-00345-4.
Windows is a registered trademark of Microsoft Corporation.   
NEC is a registered trademark of NEC Corporation.  
All other brands and product names are trademarks or registered trademarks 
of their respective owners.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks 
or registered trademarks of HDMI Licensing LLC. 
						

							English-2English-3
English
CAUTION
CAUTION:  TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE 
SURE POWER CORD IS UNPLUGGED FROM WALL 
SOCKET. TO FULLY DISENGAGE THE POWER TO 
THE UNIT, PLEASE DISCONNECT THE POWER CORD 
FROM THE AC OUTLET. DO NOT REMOVE COVER (OR 
BACK). NO USER SERVICEABLE PARTS INSIDE. REFER 
SERVICING TO QUALIFIED SERVICE PERSONNEL.
    This symbol warns user that uninsulated voltage within the 
unit may have sufficient magnitude to cause electric shock. 
Therefore, it is dangerous to make any kind of contact with 
any part inside this unit.
    This symbol alerts the user that important literature 
concerning the operation and maintenance of this unit has 
been included. Therefore, it should be read carefully in order 
to avoid any problems.
CAUTION: Please use the power cord provided with this display in 
accordance with the table below. If a power cord is not supplied with this 
equipment, please contact your supplier. For all other cases, please use a 
power cord that matches the AC voltage of the power outlet and has been 
approved by and complies with the safety standard of your particular country.
* When operating the E321/E421 monitor with its AC 125-240V power supply, 
use a power supply cord that matches the power supply voltage of the AC 
power outlet being used.
NOTE:  This product can only be serviced in the country where it was 
purchased.
Plug TypeNorth America European 
ContinentalU.K. Chinese Japanese
Plug Shape Region
Voltage
U.S.A./Canada U.K.ChinaJapan
EU (except U.K.)
120* 230 22100
230  
						

							English-4English-5
SYMBOLSYMBOL DEFINITION
DANGEROUS VOLTAGE: The lightning flash with 
arrowhead
symbol, within an equilateral triangle, is intended to alert the 
user to
the presence of uninsulated “dangerous voltage” within the 
product’s
enclosure that may be of sufficient magnitude to constitute 
a risk of
electrical shock to persons.
INSTRUCTIONS: The exclamation point within on
equilateral triangle to alert the user to the presence of
important operating and maintenance (servicing)
instruction in the literature accompanying the appliance.
SA 1965
SA 1966
Apparatus shall not be exposed to dripping or splashing and no objects filled 
with liquids, Such as
vases, shall be placed on the apparatus.
Caution - Danger of explosion if battery is incorrectly replaced. Replace only 
with the same or
equivalent type.
Batteries installed warning
Caution - Danger of explosion if battery is incorrectly replaced. Replace only 
with the same or
equivalent type. The batteries (battery pack or batteries installed) shall not be 
exposed to excessive heat such as
sunshine, fire or the like. 
						

							English-4English-5
English
Precautions And Reminders
.
 
12
3
456
7 8901
234567
89
0123
4567 8
9
0
Place the unit on a sturdy, 
even surface.
Unplug immediately if there 
is a display malfunction such 
as a loss of audio/video, 
the presence of smoke, or 
a bad odor coming from the 
display.
Do not insert any foreign 
objects into the display 
cabinet. Unplug the AC cord from the 
AC outlet before cleaning. 
Do not use liquid cleaners or 
aerosol cleaners to clean the 
display.Call a NEC certified service 
personnel for any internal 
service needed for your 
display.
Do not place the display in 
confined spaces or in a box 
when in use. Maintain ample 
ventilation for the display 
when in use. Unplug the power cord from 
the outlet when the display is 
not in use for long periods of 
time (days).
Do not place the display near 
water such as a bathtub, 
washbasin, sink, laundry tub, 
swimming pool, or a damp 
basement.
Unplug immediately if any 
foreign object is put in the 
display or if the display falls.
Do not open the display 
cabinet.
Do not cover or block 
any vents or openings. 
Inadequate ventilation may 
shorten the life of the display 
and cause overheating.
Keep the display away 
from direct sunlight, dust, 
humidity, and smoke.
Notice for Remote Controller
Avoid Dropping Avoid LiquidsAvoid Aerosol Cleaners  
						

							English-6English-7
Important Safety Instructions
Read before operating equipment
1. Read these instructions.
2.  Keep these instructions.
3.  Heed all warnings.
4.  Follow all instructions.
5.  Do not use this apparatus near water.
6.  Clean only with a dry cloth.
7.  Do not block any of the ventilation openings. Install in accordance with 
the manufacturers instructions.
8.  Do not install near any sources of heat such as  radiators, heat registers, 
stoves, or other apparatus (including amplifiers) that produce heat.
9.  Do not tamper or alter a polarized or grounding type plug. A polarized 
plug has two blades with one wider than the other. A grounding type 
plug has two blades and a third grounding prong. The wide blade or third 
prong is provided for your safety. When the provided plug does not fit into 
your outlet, consult an electrician for replacement of the obsolete outlet.
10.  Protect the power cord from being walked on or pinched particularly at 
the wall plug, convenience receptacles, and the point where it exits from 
the apparatus.
11.  Only use attachments/accessories specified by the manufacturer.
12.  Use only with a cart, stand, tripod, bracket, or table specified by the 
manufacturer, or sold with the apparatus. When a cart is used, use 
caution when moving the cart/apparatus combination to avoid injury from 
tip-over.
13.  Unplug this apparatus during lightning storms or when unused for long 
periods of time.
14.  Refer all servicing to an NEC qualified service technician. Service may be 
required when the display is damaged in any way.  This display may need 
to be serviced if there is damage to the power chord and plug, liquid or 
objects fall into the display, the display is exposed to rain or moisture, the 
display has been dropped, or the display does not operate properly.
15.  The Display should be operated only from the type of power source 
indicated on the label. If you are not sure of the type of power supplied to 
your home, consult your dealer or local power company.
16.  Class I Protective Earthing Connection – "The Class I apparatus shall be 
connected to a mains socket outlet with a protective earthing connection." 
						

							English-6English-7
English
17. Disconnect Device - Mains Plug or Appliance Coupler – "The mains plug 
or appliance coupler is used as the disconnect device. The disconnect 
device shall remain easily accessible."
18.  Disconnect Device - An all-pole MAINS SWITCH – "An all-pole MAINS 
SWITCH is used as the disconnect device. The switch shall remain 
readily operable."
19.  Service Instructions – "CAUTION – These servicing instructions are for 
use by qualified service personnel only. To reduce the risk of electric 
shock, do not perform any servicing other than that contained in the 
operating instructions unless you are qualified to do so."
20.  Wall Mount Bracket Wording – "For use only with UL Listed Wall Mount 
Bracket with minimum weight/load: Please see page 23/25.
21.  Tilt/Stability – All display's must comply with recommended international 
global safety standards for tilt and stability properties of its cabinets 
design. 
    • Do not compromise these design standards by applying excessive 
pull force to the front or top of the cabinet which could ultimately 
overturn the product 
  • Also, do not endanger yourself or children by placing electronic 
equipment/toys on the top of the cabinet. Such items could 
unsuspectingly fall from the top of the set and cause product 
damage and/or personal injury.
22.  Wall or Ceiling Mounting – The appliance should be mounted to a wall or 
ceiling only as recommended by the manufacturer.
23.  Power Lines – An outdoor antenna should be located away from power 
lines.
24.  Keep all liquids away from the display.  Do not place liquids on or near 
your display.  Keep your display away from areas where liquids could 
splash or drip onto or near your display.
25.   Do not use the display outdoors.
26.  If the display or glass is broken, do not come in contact with the liquid 
crystal and handle with care. 
27.  Rest your eyes periodically by focusing on an object at least 20 feet 
away.  Blink often
28.  The lamps in this product contain mercury. Please dispose of according 
to state, local, and/or federal law.