NEC Gt1150 Lcd Projector Users Manual

E Ð 32
When used in stand alone operation.
Pin No.
14
5
10
3
4,8,12,11SHORT/OPEN
SHORT
OPEN
SHORT
OPEN
SHORT
OPEN
SHORT
OPEN
FUNCTION
External control mode ON
External control mode OFF
POWER ON
POWER OFF
PICTURE MUTE ON
PICTURE MUTE OFF
MUTE SOUND ON
MUTE SOUND OFF
* When the combinations other than specified in the above table are selected, the input will be forcefully
switched to RGB 1.
* The term ÒSHORTÓ means to connect with pin 15
* When in the external control mode, the POWER, Source/Alphanumeric,...

E Ð 33
PC CONTROLREMOTE2
OUT OUTIN IN
Operating Multiple Projector with Remote Control
You can operate multiple projectors with the same remote control in wireless operation.
To do so:
1. Select [Advanced Menu]®[Projector Options]®[Setup]®[Page 6]®[Projector ID] and assign an ID number to
each projector. See also page E-49.
2. On the remote control specify the ID number of the projector to be adjusted. Press and hold the CTL and press
MENU (ADDRESS) button to enter the ID number.
You can operate the...

E Ð 34
L/MONO
RGB 2 MONITOR OUTR
PC CONTROL
OUTIN
L/MONO
RGB 2 MONITOR OUTR
PC CONTROL
OUTIN
Using the PC CONTROL connectors
The Link mode function allows you to adjust or set multiple projectors using the RGB 2 and the PC CONTROL
connectors.
Connection for Double Stacking in Link Mode
Master projector
Bi-directional RS-232C
cable (not supplied)
Slave projectorRGB signal cable
(supplied)
Connect source equipment to the master projector.
It is recommended that you use a commercially available...

E Ð 35
5. OPERATION
This section describes how to select a computer or video source, ad-
just the picture and sound, edit a signal and adjust all other settings
and adjustments for proper projector set-up.
General Controls
Before you turn on the projector ensure that the computer or video
source is turned on and that the lens hood cap is removed.
1.Turn on the Projector
Plug the supplied power cable in the wall outlet. The projector
will go into its standby mode and the power indicator will glow
orange....

E Ð 36
Customizing Basic/Custom Menu
The Basic/Custom menu can be customized to meet your requirements.
Selecting a menu item from the ÒBasic/Custom Menu EditÓ list, allows
you to custom tailor the menu items to your needs.
1. Select ÒBasic/Custom Menu EditÓ to display the ÒBasic/Custom
Menu EditÓ screen.
2. Use the s or t button to highlight your selection and press the
Enter button to place a check mark next to an option. This action
enables that feature.
Press the Enter button again to clear the check...

E Ð 37 List of Direct Button Combinations
CTL+  SOURCE  (1-10) Switches to any selected signal found in the Entry List.
To enable this combination, you must first assign specific remote buttons for direct input
selection in the Entry Edit window.
CTL+  ENTER (While  displaying  Entry  list) Displays the Entry Edit Command window.
CTL+CANCEL Returns  to  the previous menu without closing the slidebar or dialog.
CTL+  UNDO Clears all menus or adjustment/setting screens. All adjustments are saved...

E Ð 38
When Switcher Control is turned on:  
Advanced Menu
Source Select
Picture
Volume
Image Options
Projector Options
Tools
Help
Test Pattern1.RGB1 
2.RGB2 
3.Video1 
4.Video2 
5.S-Video 
6.DVI (DIGITAL)
7.DVI (ANALOG)
8.PC Card Viewer 
more 
Entry List  9.RGB1 (Video) 
0.RGB1 (S-Video)
RGB2 (S-Video) 
RGB2 (Video)
Brightness / Contrast / Color / Hue / Sharpness
Volume
Keystone 
Color Temperature 
Lamp Mode 
Gamma Correct 
Advanced Options 
Factory Default 
Timer 
Menu 
Setup 
Link Mode 
Switcher...

E Ð 39 Menu windows or dialog boxes typically have the following elements:
Title bar: Indicates the menu title.
Highlight: Indicates the selected menu or item.
Solid triangle: Indicates further choices are available. A highlighted triangle indicates the item is active.
Tab: Indicates a group of features in a dialog box. Selecting on any tab brings its page to the front.
Radio button: Use this round button to select an option in a dialog box.
Check box: Place a checkmark in the square box to turn the...

E Ð 40
Menu Descriptions & Functions
Source Select
When Switcher Control is set to Standalone, you can select a video
source such as a VCR, DVD player, laser disc player, computer, or
document camera depending on what is connected to your inputs, or
PC Card Viewer (PC card installed).
Enables you to select a video source such as a VCR, DVD player, laser
disc player, computer or document camera depending on what is con-
nected to your inputs.
Press the up/down buttons on your remote control or the...

E Ð 41
A press of the MENU button displays the toolbar; a press of the MENU
button again displays the Menu and hereafter each press of the MENU
button switches displaying between the Menu and the toolbar.
Prev Play Jump Setup View
Next Stop Select Delete
PC Card ViewerThis feature enables you to make presentations using a PC card that contains
captured images and slides created with the exclusive PC Card Viewer Utility
contained in the CD-ROM. See page E-53 for installing the PC Card Viewer
Utility. The...