NEC Gt2000 Lcd Projector Users Manual

E-41
The picture will become denser. (+ direc-
tion)
The picture will become fainter. (- direc-
tion)
CONTRAST
The adjustment range is from -31 to +32.
Contrast
Ð+  ±0
The picture will become lighter. (+ direction)
The picture will become darker. (- direction)
The adjustment range is from -31 to +32.
Brightness
Ð+  ±0
BRIGHT
ENTERNORMAL
Normalize?
Picture
Ye s
No
DISPLAY
SETUP
RGB1
VGA
Source Lock :Off
Expand :On
Keystone :On
Adjustments and Settings with the Remote Control
Buttons (Direct Operation)...

E-42
CTL
DISPLAY
EXPAND
0 01
1 2 3
4
5
6
12345678910111213im)
im)
0 01
1 2 3
4
5
6
12345678910111213im)
im)
Digital Zoom OFF
Digital Zoom ONEach press enlarges the pic-
ture.
Each press reduces the pic-
ture (toward the original size)
ZOOM
MAGNIFY/REDUCE
W
T
0 01
1 2 3
4
5
6
12345678910111213im)
im)
+-
2
3 4
5
6
im)
Temporarily Turning Off the On-screen Menu
Display
This function is used to temporarily turn off the on-screen
menu display.
This will be conveniently used when making fine picture or
screen...

E-43
CTL
+
-
FOCUS
KEYSTONE
[Keystone distortion]
[No distortion]
AUDIO MUTEPICTURE
ENTERSETUP
Adjusting Keystone Distortion
Keystone distortion arises when the angles are off between
the projector and screen in the vertical orientation.
The keystone function is used in this distortion adjustment.
Hold the CTL button down and use the KEYSTONE +/-
buttons to adjust the left and right sides so that they become
parallel.
When the KEYSTONE item is set to [ON], this adjustment
condition will take effect when...

E-44
Ð+  0
Main Menu
Picture
Alignment
Memory
Switcher
Display Menu
Settings Menu
SourcePicture
Brightness
Contrast
Volume
Color
Tint
Sharpness
Image Mode
White Balance
Scan Mode
Interpolation
RGB/YCbCr
Contents of the selected item
are displayed.
Settings at the Time of
Shipping from the Factory
Names of items that cannot
be adjusted with the cur-
rently selected input mode
are displayed in gray.
+-Change to the (Ð) direction Change to the (+) direction
The various adjustment ranges are from -31 to...

E-45
Item§ (Ð) Button© (+) Button Notes
Brightness Becomes darker Becomes lighter ÐÐÐÐ
Contrast Picture becomes fainter Picture becomes denser ÐÐÐÐ
Color Color becomes paler Color becomes deeper RGB input does not
apply
Tint Becomes more reddish Becomes more greenish RGB, PAL and
SECAM input do not
apply
Sharpness Picture becomes softer Picture becomes more distinct RGB input does not
apply
White Balance
Brightness R
Brightness G
Brightness B
Contrast R
Contrast G
Contrast B
Ð+  Ð10
+-Change to the (Ð)...

E-46
Ð+  0
Picture
Brightness
Contrast
Volume
Color
Tint
Sharpness
Image Mode
White Balance
Scan Mode
Interpolation
RGB/YCbCr
NORMALENTER
Normalize?
Contrast
Ye s
No
Image Mode
Normal
Natural 1
Natural 2
Natural 3
Doc Cam
Returning the Picture Adjustments to the Stan-
dard Settings
This function returns the adjustments of the selected items (i.e.,
brightness, contrast, color, tint, sharpness, and white balance) to
the standard adjustments suited to the input mode.
Example: Returning the contrast to the...

E-47
Scan Mode
Auto
Non Interlace
Interlace Video
Interlace PC
Interpolation
PC Mode
Video Mode
Selecting the Scan Mode (Scan Mode)
This function selects whether there is a skip to every other scan-
ning line, or whether scanning lines are reproduced in order and
projected.
Select [Picture]®[Scan Mode] from the main menu.
Select the scan mode with the cursor s/t button, then press the
ENTER button.
Auto ...................... Automatic switching to suit the image.
Non Interlaced......Scanning lines are...

E-48
Ð+  32
Picture
Brightness
Contrast
Volume
Color
Tint
Sharpness
Image Mode
White Balance
Scan Mode
Interpolation
RGB/YCbCr
RGB/YCbCr
RGB
YCbCr
Selecting RGB/YCbCr (RGB/YCbCr)
This function sets the RGB 1/2 and YCbCr 1 input modes of the
RGB input 1/2 connector.
These settings are selected when there is input of a color-differ-
ence signal from a DVD player, etc.
Select [Picture]®[RGB/YCbCr] from the main menu and press
the ENTER button.
Select RGB/YCbCr with the cursor s/t button.
RGB...

E-49
50 Main Menu
Picture
Alignment
Memory
Switcher
Display Menu
Settings Menu
SourceAlignment
H Position
V Position
Picture Adjust
Fine Picture
H Amplitude
V Amplitude
Image Filter
Option
Auto AlignmentAdjustment values and set-
ting conditions of the se-
lected item are displayed.
Settings at the Time of
Shipping from the Factory
ADJUSTING THE SCREEN (Alignment)
When the input signal is selected with the user memory or the channel memory and the auto memory save function is set to [On],
the adjustment...

E-50
0 01
1 2 3
4
5
6
12345678910111213im)
im)
0 01
1 2 3
4
5
6
im)
0 01
1 2 3
4
5
6
12345678910111213im)
im)
0 01
1 2 3
4
5
6
12345678910111213im)
im)
0 01
1 2 3
4
5
6
12345678910111213im)
im)
50 Alignment
H Position
V Position
Picture Adjust
Fine Picture
H Amplitude
V Amplitude
Image Filter
Option
Auto Alignment
120 Alignment
H Position
V Position
Picture Adjust
Fine Picture
H Amplitude
V Amplitude
Image Filter
Option
Auto Alignment
Adjusting the Screen Position (Horizontal Position and
Vertical...