NEC Ht1000 Entertainment Projector Users Manual

HT1000
Entertainment Projector
User’s Manual 

LIMITED WARRANTYExcept as specified below, the warranty that may be provided by the
dealer covers all defects in material or workmanship in this product.
The following are not covered by the warranty:
1. Any product on which the serial number has been defaced, modified
or removed.
2. Damage, deterioration or malfunction resulting from;
a. Accident, misuse, abuse, neglect, fire, water, dust, smoke, lightning or
other acts of nature, unauthorized product modification, or failure to fol-
low instructions...

NEC SOLUTIONS’ PROJECTOR PRODUCTSNEC Solutions (America), Inc. (hereafter NEC Solutions) warrants
this product to be free from defects in material and workmanship
under the following terms.
HOW LONG IS THE WARRANTYNEC Solutions’ HT1000 projector is covered by a two (2) year
limited parts and labor warranty from the date of the first cus-
tomer purchase. The lamp when used under normal operating
conditions is warranted for 1000 hours or six months, whichever
comes first.
WHO IS PROTECTEDThis warranty may...

DECLARATION OF CONFORMITY
U.S. Responsible Party:
Address:
Tel. No.:NEC Solutions (America), Inc.
1250 N. Arlington Heights Road
Itasca, Illinois 60143
(630) 467-5000
Type of Product:
Equipment Classification:
Models:Projector
Class B Peripheral
HT1000
We hereby declare that the equipment specified above
conforms to the technical standards as specified in the FCC Rules. 
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. 
(1) This device may not cause...

HT1000
Entertainment Projector
User’s Manual
English
Deutsch
Français
Italiano
Español
Svenska 

E-2
Safety Cautions
Precautions
Please read this manual carefully before using your NEC HT1000 Pro-
jector and keep the manual handy for future reference. Your serial num-
ber is located on the bottom of your projector. Record it here:
CAUTION
To turn off main power, be sure to remove the plug from power
outlet.
The power outlet socket should be installed as near to the
equipment as possible, and should be easily accessible.
CAUTION
TO PREVENT SHOCK, DO NOT OPEN THE CABINET.
NO USER-SERVICEABLE PARTS...

E-3
For Europe only
SCART adapter
(7N520018)
Fire and Shock Precautions
1.Ensure that there is sufficient ventilation and that vents are unob-
structed to prevent the build-up of heat inside your projector. Allow at
least 3 inches (10 cm) of space between your projector and a wall.
2. Prevent foreign objects such as paper clips and bits of paper from
falling into your projector.
Do not attempt to retrieve any objects that might fall into your projec-
tor. Do not insert any metal objects such as a wire or...

E-4
TA B LE OF CONTENTS
IMPORTANT INFORMATION ........................................... E-2Safety Cautions ........................................................................................... E-2
Whats in the Box? ...................................................................................... E-3
INTRODUCTION ......................................................... E-5Introduction to the Projector ....................................................................... E-5
Part Names of...

E-5
INTRODUCTION
Introduction to the ProjectorThis section introduces you to your new HT1000 Projector and describes
the features and controls.
Congratulations on Your Purchase of The HT1000 Pro-
jector
The HT1000 is our most sophisticated single chip DLP™ based projec-
tor for the commercial and residential entertainment user. With the
HT1000 you will enjoy projecting images up to 200 (measured diago-
nally) from your DVD player, VCR, satellite hookup, HDTV source, PC
or Macintosh computer (desktop or...

E-6
Part Names of the Projector
S
E
L
E
C
TCNACELTERNEEMNUS
O
U
R
C
E
A
U
T
O
 A
D
J
U
S
T
O
N S
T
A
N
D
 B
YSTATUS
POWER LAMP3
D
 
R
E
F
O
R
MPC-CARD
Ventilation (outlet)
Heated air is exhausted from here
*This security slot supports the MicroSaver® Security System. MicroSaver® is a registered trademark of Kensington Microware Inc. The logo is
trademarked and owned by Kensington Microware Inc.
Built-in Security Slot (  )*
Adjustable Tilt Foot Lever (See page E-19)
Attaching the lens cap
To attach the...