NEC I Series Soft Key Glossary Manual

92600GLO02
April 2001
Soft Key Glossary
Printed in U.S.A. (2562)
92600GLO02-1.qxd  3/12/01  4:45 PM  Page 1 

Add With an established Conference call, press any soft key to
add another call to the Conference.
Alm Alarm: Allows you to set Alarm 1 or Alarm 2 on your phone.
Alm2 Alarm 2: Used with the Alarm feature. This allows you to
set the time for Alarm 2.
AnHd Answer Hold: Appears while placing a Conference call.
After pressing CONF to place the first call on hold, press-
ing this key will pick up the call if you choose not to com-
plete the Conference call.
Barg Barge In: Appears when calling a busy...

Bypass Appears when calling an extension which is set for Call
Forwarding. By pressing the BYPASS key, the Call
Forward/DND Override feature is activated, allowing the
call to ring the originally called extension.
Cfwd Call Forward: Programs an extension for Call Forwarding.
CLR Clear: Allows you to clear Message Waiting or Callback
requests either left for you or that you left for someone else.
Cncl Cancel: Used when Call Forwarding is active. Pressing this
key will deactivate Call Forwarding.
OR...

Dir Directory: Use the directory list to place an intercom call to
an extension.
OR
Directory: Appears when joining calls in a Conference call.
You can use Directory Dialing to call an extension.
DND Do Not Disturb
Ext External Page Zone: Used when programming Park and Page
to select the external page zone you wish to use.
OR
External: Appears when programming Do Not Disturb to
block external calls.
Flw Follow Me: Used when programming Call Forwarding to
activate the Follow Me feature.
ICM Intercom:...

Line Line Callback: Allows you to cancel central office Camp
On or Callbacks.
MW Message Waiting: An extension can use this key to return a
Message Waiting left by another extension.
OR
If the CLR key is pressed, MW allows you to clear Message
Waiting requests you left or that someone left for you.
MsgWt Message Wait: Appears when placing an intercom call. If
pressed, it activates the Messaging Waiting feature for the
called extension.
OffP Off Premise: Used when programming Off-Premise Call
Forwarding....

R:7  L:5  E:3 While programming Park and Page or Personal Greeting,
this allows you to record (R:7), listen (L:5), or erase (E:3)
your message.
Ring Appears when programming an extension’s intercom call
type. Press RING if you want your extension to ring when
you receive an intercom call.
OR
Appears when placing a call to an extension. This allows you
to change an intercom call you place from voice announce to
ringing. Once RING is pressed, it changes to VANN.
Rpt Repeat Redial: Pressing this key...

Sta Station: Used with Call Forwarding to determine the type of
forwarding to be used.
Trf Transfer: Transfers a call to another extension.
VMsg Voice Message: Appears when placing an intercom call. If
pressed, it transfers you to the voice mailbox for that extension.
OR
Voice Message: If you have voice mail messages, pressing
VMSG allows you to access the voice mail.
ZoneAfter selecting the Park and Page feature, this will appear to
allow you to program what page zone should be used when
announcing your...

NEC America, Inc., Corporate Networks Group
4 Forest Parkway, Shelton, CT 06484
TEL: 203-926-5400  FAX: 203-929-0535
cng.nec.com
92600GLO02-1.qxd  3/12/01  4:45 PM  Page 8