NEC Itl12d1 User Guide

 34 
3.
T
ERMINAL 
S
ETUP
This chapter describes operating procedures for
terminal settings by the UP/DOWN key,   key
and key.
Various terminal settings such as display, sounds,
password, and language are also available from 
key. 
Feature
Menu
Menu  

 35 
SETUP WITH UP/DOWN KEY• TO ADJUST HANDSET RECEIVER VOLUME 
 
Press  ( Up/Down-cursor ) or  /  (Up/Down)
key in the off-hook status or during the call.
LCD indication for North America, Latin America, Asia,  Middle East and Russia
LCD indication for Australia• TO ADJUST SPEAKER VOLUME  
 
Press  ( Up/Down-cursor ) or  /  (Up/Down)
key during speakerphone operation or during the call.
• TO ADJUST RINGER TONE
 
Press    ( Up/Down-cursor ) or  /  (Up/Down) 
key during ringing.• TO ADJUST LCD CONTRAST...

 36 
SETUP WITH FEATURE KEY• MICROPHONE ON/OFF
 
LED on   key shows the status of the built-in
microphone.Press soft key associated with the MIC Display or 
press  and  key.• TO ADJUST INITIAL RECEIVING VOL-UME 
 
Handset receiver volume can be changed.• TO CHANGE HANDSET RECEIVER VOLUME
 
Press   and   key. The LCD displays the 
current volume status.
Press   and   key to alternate between 
Large and Small volume.
• TO SELECT RINGER TONE DT Series has 10 kinds of ringer tones that you can
select.
Press...

 37 
• TO ADJUST TRANSMISSION/RECEIV-ING VOLUME Handset volume can be changed.
Press   and   key. The LCD displays the 
current volume.
Press   and   key again to alternate 
between Small and Large volume.• TO ACTIVATE HANDS-FREE   To set hands-free on:Press   and   key. The LCD displays:
To Set Hands-Free Off: Press   and   key. The LCD displays:
• CALL INDICATOR LAMP ON/OFF  
 
The user can choose to turn the call indicator lamp
either on or off during ringing.
Press   and   key. The LCD displays:•...

 38 
Note:
When this feature is ON, the user may initiate a
call by immediately dialing the number and the
station will go hands-free off-hook automatically.
Enabling this feature for DT700 Series, restricts
the terminals ability to enter the DT700 Series
User Menu. Please note when the features on
the following pages are us ed in conjunction with
Dynamic Dial Pad, that the user does not have to
press the Speaker key or lift the handset to
receive dial tone.4:26 PM    TUE 13  APR 2004 Direct  Dial  Pad...

 39 
SETUP WITH MENU KEY FOR 
DT700 SERIES• TO ENABLE/DISABLE OFF-HOOK RINGING The procedure below shows how to enable/disable Off-
hook ringing.  
While indicating the current time on LCD, press   key to open the  Menu screen. 
Select  Setting and then press   ( Enter),  
( Right-cursor ) or OK soft key. (or press   key.)
Select  User Setting  and then press  ( Enter), 
( Right-cursor ) or OK soft key. (or press   
key.) Select 
Incoming Call  and then press   
( Enter ),  ( Right-cursor ) or OK soft...

 40 
To disable/enable the off-hook ringing, select 
Disable  or Enable . Then, press   ( Enter) 
or  OK  soft key.
Note:
Default setting is  2 Enable.
Note:
The currently enabled item is highlighted.
12
Headset Ring
[Incoming Call]3456
Ring Tone
Headset Ring Volume
OK
Back
↓
Illumination Ring Volume
Offhook Ring
1
2
[Offhook Ring]
OK
Back 112
Disable
Enable↓  

 41 
• TO SET RINGING OF HEADSET The procedure below shows how to enable/disable the
ringing of headset. While indicating the current time on LCD, press   key to open the  Menu screen. 
Select  Setting and then press   ( Enter),  
( Right-cursor ) or OK soft key. (or press   key.)
Select  User Setting  and then press  ( Enter), 
( Right-cursor ) or OK soft key. (or press   
key.) Select 
Incoming Call  and then press   
( Enter ),  ( Right-cursor ) or OK soft key. (or 
press  key.)
Select  Headset Ring...

 42 
To disable/enable the ringing of headset, select Disable  or Enable . Then, press   ( Enter) 
or  OK  soft key.
Note:
Default setting is  1 Disable.
Note:
The currently enabled item is highlighted.
12[Incoming Call]3456
Ring Tone
Headset Ring Volume
OK
Back
↓
Illumination Ring Volume
Offhook Ring↓Headset Ring
1
2
[Headset Ring]
OK
Back 112
EnableDisable
↓  

 43 
• TO SET RINGER TONE
 
The procedure below shows how to change the ringer
tone for internal call and external call.While indicating the current time on LCD, press   key to open the  Menu screen. 
Select  Setting and then press   ( Enter),  
( Right-cursor ) or OK soft key. (or press   key.)
Select  User Setting  and then press  ( Enter), 
( Right-cursor ) or OK soft key. (or press   
key.) Select 
Incoming Call  and then press   
( Enter ),  ( Right-cursor ) or OK soft key. (or 
press  key.)
Select...