NEC Itl12d1 User Guide

 44 
Select External Call  when setting the ringer 
tone for external calls. Select  Internal Call 
when setting the ringer tone  for internal call. Then, 
press  ( Enter) or OK  soft key.
Select a desired tone type and then press   
( Enter ) or OK soft key.
Note:
The currently enabled item is highlighted.
12[Incoming Call]3456
Headset Ring Volume
OK
Back
↓
Illumination Ring Volume
Offhook Ring↓Headset Ring
Ring Tone
1
2
12
IM
[Ring Tone]3
Internal Call
OK
Back
↓
External Call↓
No.
Menu Item
Frequency...

 45 
6
Tone Type6
11 0 0
1400
16Hz modulation
7
Tone Type7
660
760
16Hz modulation
8
Tone Type8
11 0 0
Envelope
9
Tone Type9
-
Door Phone Melody
10
Tone Type10
-
Melody 1
11
Tone Type11
-
Melody 2
12
Tone Type12
-
Melody 3
13
Tone Type13
-
Melody 4
14
Tone Type14
-
Melody 5
15
Download1
-
16
Download2
-
17
Download3
-
Note:
The user can set ringer tone for the telephone set
here. Ringer Tone type can be set for “Name”,
“Group” and “Telephone set”. The ringer Tone
type set for “Name” has higher priority...

 46 
• TO SET ILLUMINATION PATTERN FOR CALL INDICATION LAMP The procedure below shows  how to set the illumination
pattern for the Call Indicator Lamp.
While indicating the current time on LCD, press   key to open the  Menu screen. 
Select  Setting and then press   ( Enter),  
( Right-cursor ) or OK soft key. (or press   key.)
Select  User Setting  and then press  ( Enter), 
( Right-cursor ) or OK soft key. (or press   
key.) Select 
Incoming  Call  and then press   
( Enter ),  ( Right-cursor ) or OK...

 47 
Select External Call  when setting the illumina-
tion pattern for external calls. Select  Internal 
Call  when setting the illumination pattern for inter-
nal call. Then, press   ( Enter) or OK soft key.
Select a desired illumination pattern and then press   (Enter ) or OK soft key.
12[Incoming Call]3456
Headset Ring Volume
OK
Back
Ring Volume
Offhook Ring
↓Headset Ring
Ring Tone
Illumination
1
2
12
IM
[Illumination]3
Internal Call
OK
Back
↓
External Call
Note:
The default setting is  0 Automatic....

 48 
• TO ENABLE/DISABLE RTP ALARM The procedure below shows how to enable/disable
RTP alarm.While indicating the current time on LCD, press   key to open the  Menu screen. 
Select  Setting and then press   ( Enter),  
( Right-cursor ) or OK soft key. (or press   key.)
Select  User Setting  and then press  ( Enter), 
( Right-cursor ) or OK soft key. (or press   
key.) Select 
Talk and then press   ( Enter),  
( Right-cursor ) or OK soft key. (or press   key.)
Select  RTP Alarm  and then press   (...

 49 
Select Automatic ,  Disable  or Enable  
(see the following table). Then, press   ( Enter) 
or  OK  soft key.
Menu Items
Descriptions
0 Automatic Follow the setting on the System. If no 
setting is made in the System, the 
default setting (Alarm=ON) is applied.
1 Disable Follow the setting  on the terminal (OFF).
2 Enable Follow the settin g on the terminal (ON).
Note:
For the setting on the System, contact to the Sys-
tem Administrator.
Note:
The currently enabled item is highlighted.
12[Talk]345...

 50 
• TO ENABLE/DISABLE DTMF TONE The procedure below shows how to enable/disable
RTP alarm.While indicating the current time on LCD, press   key to open the  Menu screen. 
Select  Setting and then press   ( Enter),  
( Right-cursor ) or OK soft key. (or press   key.)
Select  User Setting  and then press  ( Enter), 
( Right-cursor ) or OK soft key. (or press   
key.) Select 
Talk and then press   ( Enter),  
( Right-cursor ) or OK soft key. (or press   key.)
Select  DTMF Tone  and then press   (...

 51 
Select Automatic ,  Disable  or Enable  
(see the following table). Then, press   ( Enter) 
or  OK  soft key.
Menu Items
Descriptions
0 Automatic Follow the setting on the System. If no 
setting is made in the System, the 
default setting (DTMF=ON) is applied.
1 Disable Follow the setting on the terminal (OFF).
2 Enable Follow the setting  on the terminal (ON).
Note:
For the setting on the System, contact to the Sys-
tem Administrator.
Note:
The currently enabled item is highlighted.
12[Talk]345...

 52 
• TO SET KEY TOUCH The procedure below shows how to set Key Touch
Tone. Key Touch Tone is a tone generated when the
digit keys are pressed while DT Series is off-hook.While indicating the current time on LCD, press   key to open the  Menu screen. 
Select  Setting and then press   ( Enter),  
( Right-cursor ) or OK soft key. (or press   key.)
Select  User Setting  and then press  ( Enter), 
( Right-cursor ) or OK soft key. (or press   
key.) Select 
Talk and then press   ( Enter),  
( Right-cursor )...

 53 
Select Automatic ,  No Tone , Tone  or 
Vo i c e . Then, press   ( Enter) or OK soft key.
Note:
When  0 Automatic  is set, the default setting
(Tone) is applied.
Note:
The currently enabled item is highlighted.
12[Talk]345
OK
Back
↓
Hold Music
PrefixRTP Alarm
DTMF Tone↓Key Touch Tone
0
1
2
3
01[Key Touch Tone]2
OK
Back
No Tone
↓
ToneAutomatic
3
Voice