NEC Portrait 308/824 Multibutton Telephone Quick Reference Guide

The MONflash rate
indicates if the phone is
monitoring or being
monitored with the Room
Monitor feature.
Press LNDto automatically redial the last
number you called.Press the Speakerto use Handsfree
instead of the handset.
Use Microphone Muteto turn off the
Handsfree microphone.
Use Intercomto call co-workers.You can place an Intercom or outside call on
Hold. (Note: With Intercom calls, do not hang
up the handset after placing the call on Hold.)Use the CLEAR key to remove the data
shown in the second row...

If your call doesn’t go through . . .Camp On and Callback
1. For Intercom calls, dial  to Camp On
(wait without hanging up).
•When the called party hangs up, the
call rings you back.OR
1. For Intercom calls, dial  and hang up
to leave a Callbackfor an extension.
For Outside calls, press  and dial a
Queue Group number (e.g., 1-6) if all
lines busy. Hang up.
2. Lift handset or press  when the sys-
tem calls you back.
3. (Outside calls only) Place your call again.
To cancel your Callback (ICM calls only):...

Tones you may hear . . .
Press DND. If Level 3 programmed: Press DND once to
block outside and ICM calls; press DND twice to block
just outside calls.
The programmed level determines the types of calls
blocked:
Level 1 blocks outside calls, allows ICM calls
Level 2 blocks outside and ICM calls
Level 3 blocks outside and ICM or just outside calls
Do Not Disturb:
To activate or cancel:From extension to be monitored: Lift
handset + FTR + FLASH + Hang up + From monitoring
extension: FTR + FLASH.
Room...

Programming Function Keys
SPK + DC+#+One-Touch Key + Extension
number (Door Box extension accepted) + SPK
DSS:
SPK+DC+*+One-Touch Key + Phone number
+ SPK
Personal Speed Dial:
CHECK + FTR + Message number (00-49) + * +
edit message if needed + CHECK + One-Touch
key (#1 or #2 only) + * + CLEAR
Selectable Display
Message:
Programming One-Touch Keys
SPK key + FTR key + 4 + One-Touch or
CO key + feature number + * + SPK key.
SPK key + FTR key + 4 + One-Touch or
CO key + 00 + * + SPK key.
Delete Stored...

Quickly dial co-workers and outside calls . . .Direct Station Selection (DSS)
1. Lift handset.
2. Press the One Touch DSS key (1-10) for
co-worker.
1. Press + + .
2. Press the One Touch DSS key (1-10) you want
to program.
3. Dial extension number to be assigned.Speed Dial
1. Lift handset.
2. Press + .
3. Press a One-Touch Speed Dial key.
4. Dial number to be stored (18 digits max.).
•Pressing TRFR=pause, FLASH=Flash
and CONF=Stop.•Press CLEAR to reenter phone number.
5. Hang up.
1. Lift handset and press...

82400MBG05
April 2001
Multibutton Telephone
Quick Reference Guide Identify lines, extensions, Speed Dial #’s . . .
Numbers:Press desired number on the dial pad.
Letters:Determine letter’s position on the dial pad key
(e.g., dial pad key #2 - A=position 1, B=position 2, C= 
position 3). Press One-Touch key for character required.
One-Touch key 1=position 1, One-Touch key 2=position 2
One-Touch key 3=position 3, One-Touch key 4=space,
One-Touch key 5=delete a character, One-Touch key 6= 
delete all...