Home > Netgear > Router > Netgear C3000 N300 Wifi Cable Modem Router User Manual

Netgear C3000 N300 Wifi Cable Modem Router User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Netgear C3000 N300 Wifi Cable Modem Router User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 137 Netgear manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Hardware Setup 11
     N300 WiFi Cable Modem Router Model C3000
    Cable the Modem Router with a Simple Network
    The modem router comes configured to work as both a modem and a router. You can share 
    your Internet connection without connecting the modem router to a router\
     or gateway.
    Modem router Power On/Off
    Power adapter Coaxial cable
    button
    Figure 4. Modem router with a simple network
    
    To cable your modem router:
    1.  Connect a coaxial cable from the cable port on the  modem router 
     to a cable wall outlet 
    or a line splitter.
    Use the coaxial cable that your cable company provides.
    Note: If Charter is your cable Internet service provider (ISP), Charter 
    recommends connecting your modem router  directly to a cable wall 
    outlet. If you must use a splitter, use a splitter that is rated at 3.5 \
    dBmv.
    2.  Connect the power adapter to the modem router and plug the power adapter\
     into an 
    electrical outlet.
    3.  Press the  Power On/Off button on the rear panel of the modem router.
    The Power LED lights green.
    You can log in to the modem router 
     to view or change its settings.
    Cable Your Modem Router to a Router
    If you want to cable the modem router to a router, you must log in to the modem router and 
    change its Router Mode setting. Selecting the No check box for Router Mo\
    de prevents 
    network conflicts. Problems can occur when two routers on the same netwo\
    rk both attempt to 
    perform routing tasks such as Network Address Translation (NAT) and DHCP (assigning IP 
    addresses to devices on the network). 
    						
    							Hardware Setup 12
    N300 WiFi Cable Modem Router Model C3000 
    To cable your modem router to a router or gateway:
    1. 
    Connect a coaxial cable from the cable port on the  modem router to a cable wall outlet 
    or a line splitter.
    Use the coaxial cable that your cable company provides.
    Note: If Charter is your cable Internet service provider (ISP), Charter 
    recommends connecting your modem router  directly to a cable wall 
    outlet. If you must use a splitter, use a splitter that is rated at 3.5 \
    dBmv.
    2.  Connect the power adapter to the modem router and plug the power adapter\
     in to an 
    electrical outlet.
    3.  Press the Power On/Off button on the rear panel of the modem router.
    The Power LED lights green.
    4.  On your computer or wireless device, find and select the WiFi network.
    The WiFi network name is on the modem router’s label.
    5.  Join the WiFi network and enter the WiFi password.
    The password is on the modem router’s label.
    Your wireless device connects to the WiFi network.
    6.  Launch a web browser
     .
    7.  T
    ype  http://routerlogin.net  or http://192.168.0.1.
    A login screen displays.
    8.  Enter the modem router user name and password.
    The user name is  admin. 
     The default password is password . The user name and 
    password are case-sensitive.
    The BASIC Home screen displays.
    9.  Select  ADV
     ANCED > Administration > Router Mode .
    10.  Select the  No radio button.
    With this setting, the modem router works as a bridge and obtains IP add\
    resses from the 
    Internet service provider.
    11.  Click the  Apply button.
    Your change is saved.
    12.  Follow the instructions that came with your router to connect it to the \
    modem router. 
    						
    							13
    2
    2.   Connect to the Network and 
    Access the Modem Router
    This chapter contains the following sections:
    •Connect to the Network 
    •Types of Logins 
    •Log In to the Modem Router  
    						
    							Connect to the Network and Access the Modem Router 
    14 N300 WiFi Cable Modem Router Model C3000 
    Connect to the Network
    You can connect to the modem router’s network through a wired or WiFi connection. If you 
    set up your computer to use a static IP address, change the settings so that it uses Dynamic 
    Host Configuration Protocol (DHCP). 
    Wired Connection
    You can connect your computer to the modem router using an Ethernet cable and join the 
    modem router’s local area network (LAN).
    To connect your computer to the modem router with an Ethernet cable:
    1. Make sure that the modem router has power (its Power LED is lit).
    2. Connect an Ethernet cable to an Ethernet port on your computer.
    3. Connect the other end of the Ethernet cable to one of the numbered Ethernet ports.
    Your computer connects to the local area network (LAN). A message might display on 
    your computer screen to notify you that an Ethernet cable is connected.
    WiFi Connection
    You can connect to the modem router’s WiFi network with Wi-Fi Protected Setup (WPS) or 
    you can find and select the WiFi network.
    To use WPS to connect to the WiFi network:
    1. Make sure that the modem router has power (its Power LED is lit).
    2. Check the WPS instructions for your computer or wireless device.
    3. Press the WPS button on the modem router.
    4. Within two minutes, on your computer or WiFi device, press its WPS button or follow its 
    instructions for WPS connections.
    Your computer or wireless device connects to the WiFi network.
    To find and select the WiFi network:
    1. Make sure that the modem router has power (its Power LED is lit).
    2. On your computer or wireless device, find and select the WiFi network.
    The WiFi network name is on the modem router’s label.
    3. Join the WiFi network and enter the WiFi password.
    The password is on the modem router’s label.
    Your wireless device connects to the WiFi network. 
    						
    							Connect to the Network and Access the Modem Router 15
     N300 WiFi Cable Modem Router Model C3000
    Label
    The label on the modem router shows the login information, MAC address, \
    and serial 
    number.
    Figure 5. Modem router label
    Types of Logins
    Separate types of logins have different purposes. It is important that you understand the 
    difference so that you know which login to use when. 
    Types of logins: • ISP login. 
     The login that your ISP gave you logs you in to your Internet service. Your 
    service provider gave you this login information in a letter or some oth\
    er way. If you 
    cannot find this login information, contact your service provider.
    • W
    iFi network key or password. Your modem router is preset with a unique wireless 
    network name (SSID) and password for wireless access. This information is on the 
    modem router label.
    • Modem router login.This logs you in to the modem router interface from a web browser 
    as admin.
    Log In to the Modem Router
    When you connect to the network (either with WiFi or with an Ethernet c\
    able), you can use a 
    web browser to access the modem router to view or change its settings. The first time you 
    access the modem router, NETGEAR genie automatically checks to see if yo\
    ur modem 
    router can connect to your Internet service.
    To log in to the modem router:
    1. Launch a web browser from a computer or wireless device that is connecte\
    d to the 
    network.
    2.  T
    ype  http://routerlogin.net  or http://192.168.0.1. 
    						
    							Connect to the Network and Access the Modem Router 
    16 N300 WiFi Cable Modem Router Model C3000 
    A login screen displays.
    3. Enter the modem router user name and password.
    The user name is admin. The default password is password. The user name and 
    password are case-sensitive.
    The BASIC Home screen displays.  
    						
    							17
    3
    3.   Specify Initial Settings
    This chapter contains the following sections:
    •Notify Your Internet Service Provider 
    •Specify the Cable Connection Starting Frequency 
    •View Modem Router Initialization 
    •Specify the Internet Connection Settings  
    						
    							Specify Initial Settings 18
    N300 WiFi Cable Modem Router Model C3000 
    Notify Your Internet Service Provider
    You must contact your Internet service provider (ISP) and tell them tha\
    t you are using the 
    modem router.
    To set up your Internet connection:
    1.  Contact your cable ISP and inform them that you are installing a new  modem router that 
    you bought from a retail store.
    Provide your cable ISP with the modem router’s
      model number, which is C3000.
    Note: The modem router is  certified by all major cable ISPs.
    You can also visit your cable ISP’s website and follow the onscreen instructions to set up  your Internet service.
    Cable ISPContact Information
    Cablevision www.cablevision.com
    www.optimum.com/contactus.jsp
    Charter 1-888-438-2427
    https://install.charter.com/
    Comcast 1-800-COMCAST (1-800-266-2278)
    https://www.comcast.com/activate/
    Cox 1-877-891-2899
    ww2.cox.com
    Optimum http://play.optimum.net
    https://www.optimum.net/support/phone-list/
    Time Warner Cable 1-800-892-2253
    http://www.timewarnercable.com/
    Note:The contact information listed might change. You can also find the 
    contact number in your monthly Internet service billing statement.
    2.  When asked, provide the modem router’
     s serial number and MAC address on the product 
    label.
    3.  W
    ait for your cable ISP to confirm that your modem router is active.
    4. If you do not have an Internet connection with the modem router, ask you\
    r cable ISP to look 
    for your modem router online, and do one of the following depending on w\
    hat your cable ISP 
    tells you about your modem router: 
    						
    							Specify Initial Settings 19
     N300 WiFi Cable Modem Router Model C3000
    •
    If the  modem router is  not visible, your cable ISP can give you instructions to verify 
    why the modem router  does not connect with your high-speed Internet service.
    • If the  modem router 
     is visible to your cable ISP, try rebooting the modem router and 
    check its LEDs to verify the status of the Internet connection.
    Specify the Cable Connection Starting Frequency
    The starting frequency is automatically generated. For most Internet con\
    nections, you do not  need to specify this information. If you need to enter a starting freque\
    ncy, contact your 
    Internet service provider.
    To change the starting frequency:
    1.  Launch a web browser from a computer or wireless device that is connecte\
    d to the 
    network.
    2.  T
    ype  http://routerlogin.net  or http://192.168.0.1.
    A login screen displays.
    3.  Enter the modem router user name and password.
    The user name is  admin. 
     The default password is password. The user name and 
    password are case-sensitive.
    The BASIC Home screen displays.
    4.  Select  Cable Connection.
    5. Type a number in the  Starting Frequency field. 
    6.  Click the  Apply button. 
    						
    							Specify Initial Settings 20
    N300 WiFi Cable Modem Router Model C3000 
    View Modem Router Initialization 
    You can utrack the initialization procedure of the modem router, and to g\
    et details about the 
    downstream and upstream cable channel. The time is displayed after the modem router is 
    initialized.
    The modem router automatically goes through the following steps in the p\
    rovisioning  process:
    • Scans and locks the downstream frequency and then ranges the upstream ch\
    annels.
    • Obtains a W
     AN address for the modem router.
    • Connects to the Internet.
    To view the status of the modem router initialization:
    1. Launch a web browser from a computer or wireless device that is connecte\
    d to the 
    network.
    2.  T
    ype  http://routerlogin.net  or http://192.168.0.1.
    A login screen displays.
    3.  Enter the modem router user name and password.
    The user name is  admin. 
     The default password is password . The user name and 
    password are case-sensitive.
    The BASIC Home screen displays.
    4.  Select  Cable Connection.
    The Setup Procedure section displays the initialization progress.
    The Downstream Bonded Channels section displays the status of each chann\
    el. 
    						
    All Netgear manuals Comments (0)

    Related Manuals for Netgear C3000 N300 Wifi Cable Modem Router User Manual