Netgear N150 Manual

							Technical Specifications37
Technical Specifications
Default Configuration Settings
This section provides factory default settings and technical specifications for the N150 Wireless 
Router Model WNR1000v2h2.
Table 3.  Home Router Default Configuration Settings 
FeatureDefault Setting
Router Login
Router Login URL http://www. routerlogin.net; 
http://www.routerlogin.com; or http://192.168.1.1
Login Name (case sensitive) admin
Login Password (case sensitive) password
Internet Connection
WAN MAC Address Default hardware address (on label)
MTU Size 1500
Local Network
Router Lan IP address (the Gateway IP 
address)192.168.1.1
IP Subnet Mask 255.255.255.0
DHCP Server Enabled
Time Zone GMT
Time Zone Adjusted for Daylight Saving 
TimeDisabled
Firewall
Inbound (communications coming in from 
the Internet)Disabled (bars all unsolicited requests except for 
traffic on port 80, the http port)
Outbound (communications going out to 
the Internet)Enabled (all) 
						

							Technical Specifications38
Wireless
Wireless Communication Enabled
SSID Name NETGEAR
Security Disabled
Broadcast SSID Enabled
Transmission Speed Auto
a
Country/Region United States (North America only; otherwise varies 
by country and region)
RF Channel 11 in North America, 13 in most other regions
Operating Mode Up to 150 Mbps
Data Rate Best
Output Power Full
a. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network 
conditions and environmental factors, including volume of network traffic, building materials and construction, and net-
work overhead lower actual data throughput rate.
Table 3.  Home Router Default Configuration Settings (continued)
FeatureDefault Setting 
						

							Technical Specifications39
Restoring the Default Password and Configuration 
Settings
You can restore the factory default configuration settings that reset the router’s user name to 
admin, the password to password, and the IP address to 192.168.1.1. 
To restore the factory default configuration settings:
1.
Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings 
button, located on the rear panel of the router, for about 5 seconds, until the Power light begins 
to blink (see “Back Panel” on page 4).
2.Release the restore factory settings button, and wait for the router to restart, and for the Power 
light to stop blinking and become solid green. 
The factory default settings will be restored so that you can access the router from your Web 
browser using the factory defaults.
This procedure will erase all the current configuration settings and restore the factory 
defaults. 
						

							Related Documents40
Related Documents
This section provides links to reference documents that you can use to gain a more complete 
understanding of the technologies used in your NETGEAR product.
Table 4.  Related Documents
DocumentLink
Internet Networking and 
TCP/IP Addressing
http://documentation.netgear.com/reference/enu/tcpip/index.htm
Preparing a Computer 
for Network Accesshttp://documentation.netgear.com/reference/enu/wsdhcp/index.htm
Glossaryhttp://documentation.netgear.com/reference/enu/glossary/index.htm 
						

							41
Registration and Certifications
Product Registration, Support, and Documentation 
Register your product at http://www.NETGEAR.com/register. You must register before you can use our telephone 
support service. Product updates and Web support are always available by going to: http://www.NETGEAR.com/support. 
Setup documentation is available on the CD, on the support website, and on the documentation website. When the 
wireless router is connected to the Internet, click the KnowledgeBase link to view support information or click the 
Documentation link to view the online User Manual for this wireless router.
Maximum Wireless Signal Rate Derived from IEEE Standard 802.11 Specifications
Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, 
building materials and construction, and network overhead, lower actual data throughput rate.
Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of 
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try 
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.