Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Configure the IPv6 Internet and WAN Settings 
91  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Note:If your ISP requires MAC authentication and another MAC address was 
previously registered with your ISP, you must configure that MAC address 
on the VPN firewall (see 
Change the Advertised MAC Address of the VPN 
Firewall on page 70) before you begin the following procedure.
To let the VPN firewall automatically configure a WAN interface for an IPv6 connection 
to the Internet:
1. On your...

Configure the IPv6 Internet and WAN Settings 
92 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
•Status. The status of the WAN interface (UP or DOWN).
•WAN IP. The IPv6 address of the WAN interface.
•Action. The Edit button provides access to the WAN IPv6 ISP Settings screen (see 
Step 8) for the corresponding WAN interface; the Status button provides access to 
the Connection Status screen (see Step 13) for the corresponding WAN interface.
8. In the IPv6 WAN Settings table, click the Edit...

Configure the IPv6 Internet and WAN Settings 
93  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
•Prefix delegation check box is selected. A prefix is assigned by the ISP DHCPv6 
server through prefix delegation, for example, 2001:db8:: /64.
The VPN firewall’s own stateless DHCPv6 server can assign this prefix to its IPv6 
LAN clients. For more information about prefix delegation through the stateless 
DHCPv6 server in the LAN, see 
Manage a Stateless DHCPv6 Server with Prefix 
Delegation for...

Configure the IPv6 Internet and WAN Settings 
94 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Manually Configure a Static IPv6 Internet Connection
To configure a static IPv6 Internet connection, enter the IPv6 address information that your 
IPv6 ISP gave you. If you do not have this information, contact your IPv6 ISP. 
Note:If your ISP requires MAC authentication and another MAC address was 
previously registered with your ISP, you must configure that MAC address 
on the VPN firewall (see...

Configure the IPv6 Internet and WAN Settings 
95  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
8. In the IPv6 WAN Settings table, click the Edit button for the WAN interface that you want 
to configure.
The WAN IPv6 ISP Settings screen displays. The following figure shows the WAN2 IPv6 
ISP Settings screen as an example.
9. In the Internet Address section, from the IPv6 menu, select Static IPv6.
10. In the Static IP Address section, enter the settings as described in the following table.  

Configure the IPv6 Internet and WAN Settings 
96 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Note:If you do not know your static IPv6 address information, contact your 
IPv6 ISP.
11. Click the Apply button.
Your settings are saved.
12. Verify the connection:
a.Select Network Configuration > WAN Settings > WAN Setup.
The WAN Setup screen displays the IPv4 settings.
b. In the upper right, select the IPv6 radio button. 
The WAN Setup screen displays the IPv6 settings (see the figure that is...

Configure the IPv6 Internet and WAN Settings 
97  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
The Connection Status screen shows a valid IP address and gateway. You are 
connected to the Internet. For more information about the connections status, see 
View the WAN Port Status and Terminate or Establish the Internet Connection on 
page 594.
Note:If the configuration was not successful, see Troubleshoot the ISP 
Connection on page 615.
Manually Configure a PPPoE IPv6 Internet Connection
To...

Configure the IPv6 Internet and WAN Settings 
98 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
For the default administrative account, the default user name is admin and the default 
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu, 
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu 
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network...

Configure the IPv6 Internet and WAN Settings 
99  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
9. In the Internet Address section, from the IPv6 menu, select PPPoE.
10. In the PPPoE IPv6 section, enter the settings as described in the following table. 
Note:If you do not know your PPPoE IPv6 information, contact your IPv6 ISP.
SettingDescription
User Name The PPPoE user name that is provided by your ISP.
Password The PPPoE password that is provided by your ISP. 

Configure the IPv6 Internet and WAN Settings 
100 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
11. Click the Apply button.
Your settings are saved.
12. Verify the connection:
a.Select Network Configuration > WAN Settings > WAN Setup. 
The WAN Setup screen displays the IPv4 settings.
b. In the upper right, select the IPv6 radio button. 
The WAN Setup screen displays the IPv6 settings (see the figure that is shown in 
Step 7).
c. In the IPv6 WAN Settings table, click the Status button for the...