Netgear Prosafe 8 Port Manual

Manage the Switch 
61  ProSAFE 8-Port and 16-Port Gigabit Click Switch
2. Double-click the ProSAFE Plus Utility icon.
The configuration home screen displays a list of Plus switches that it discovers on the 
local network.
3. Select a switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Status screen displays....

Manage the Switch 
62 ProSAFE 8-Port and 16-Port Gigabit Click Switch 
The switch reboots.
Save the Switch Configuration
You can save the switch configuration as a file. NETGEAR recommends that you save the 
configuration. Then you can quickly restore the switch configuration if you change the 
settings and then decide to return the switch to its previous settings.
Use the ProSAFE Utility to Save the Switch Configuration
To save the switch configuration:
1. Connect your computer to the same network as...

Manage the Switch 
63  ProSAFE 8-Port and 16-Port Gigabit Click Switch
3. Launch a web browser.
4. In the address field of the browser, enter the IP address of the switch.
You can find the IP address of the switch by using the ProSAFE Plus utility or get it from 
the DHCP server. If the switch cannot get an IP address from a DHCP server, enter 
192.168.0.239.
You are asked to enter the password for the switch.
5. Enter the switch’s password in the password field.
The switch’s default password is...

Manage the Switch 
64 ProSAFE 8-Port and 16-Port Gigabit Click Switch 
The Restore Configuration screen displays.
7. Click the BROWSE button.
8. Find and select the configuration file.
9. Click the APPLY button.
The saved configuration is restored to the switch.
Use Browser-Based Access to Restore a Saved Switch 
Configuration
To restore the switch configuration that you saved:
1. Set up your computer to use an IP address in the same subnet as the IP address of the 
switch.
2. Use an Ethernet cable to...

Manage the Switch 
65  ProSAFE 8-Port and 16-Port Gigabit Click Switch
Use the ProSAFE Utility to Restore Factory Settings
To restore factory settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection.
2. Double-click the ProSAFE Plus Utility icon.
The configuration home screen displays a list of Plus switches that it discovers on the 
local network.
3. Select a switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button....

Manage the Switch 66
ProSAFE 8-Port and 16-Port Gigabit Click Switch 
The Switch Information screen displays.
6.  Select  System > Maintenance > Factory Default .
The Factory Default screen displays.
7.  Select the check box.
8.  Click the  Apply button.
9.  The switch returns to its factory settings.
Enable Port Mirroring
Port mirroring allows a switch port to see data on another port.
Use the ProSAFE Utility to Enable Port Mirroring
To enable port mirroring:
1.  Connect your computer to the same...

Manage the Switch 67
 ProSAFE 8-Port and 16-Port Gigabit Click Switch
8. 
In the Source Port table, select the check box for the source port.
9.  In the Destination Port menu, select the destination port.
10.  Click the  APPL
 Y button.
Your settings are saved.
Use Browser-Based Access to Enable Port Mirroring
To enable port mirroring:
1.  Set up your computer to use an IP address in the same subnet as the IP a\
ddress of the 
switch.
2.  Use an Ethernet cable to connect your computer to an Ethernet...

68
7
7.   Diagnostics and Troubleshooting
This chapter covers the following topics: 
•Use Browser-Based Access to Register Your Product
•Test Cable Connections
•Use Browser-Based Access to Register Your Product 

Diagnostics and Troubleshooting 
69  ProSAFE 8-Port and 16-Port Gigabit Click Switch
Use Browser-Based Access to Register Your Product
Registering your product allows you to receive email alerts and streamlines the technical 
support process. 
To register your product:
1. Set up your computer to use an IP address in the same subnet as the IP address of the 
switch.
2. Use an Ethernet cable to connect your computer to an Ethernet port on the switch.
3. Launch a web browser.
4. In the address field of the...

Diagnostics and Troubleshooting 70
ProSAFE 8-Port and 16-Port Gigabit Click Switch 
3. 
Select a switch.
If you do not see the switch, click the REFRESH button.
4.  Click the  APPL
 Y button.
You are asked to enter the password for the switch.
5.  Enter the switch’
 s password in the password field.
The switch’s default password is  password.
The Switch Status screen displays.
6.  Select  Monitoring > Cable T
 ester.
7. Select one or more check boxes.
8.  Click the  TEST SELECTED PORT button.
The switch...