Netgear R6400 Ac1750 Smart Wifi Router 802 11ac Dual Band Gigabit User Manual

Specify Your Internet Settings 
31  AC1750 Smart WiFi Router
•Use DHCP Server. This method passes more information to LAN devices, but some 
IPv6 systems might not support the DHCv6 client function.
•Auto Config. This is the default setting.
This setting specifies how the router assigns IPv6 addresses to the devices on your home 
network (the LAN). 
10. (Optional) Select the Use This Interface ID check box and specify the interface ID that you 
want to be used for the IPv6 address of the router’s LAN...

Specify Your Internet Settings 32
AC1750
 Smart  WiFi Router 
The IPv6 page displays.
5.  In the Internet Connection T
 ype menu, select 6rd Tunnel.
The router automatically detects the information in the following sectio\
ns:
• 6rd (IPv6 Rapid Development) Configuration. 
 The router detects the service 
provider’s IPv4 network and attempts to establish an IPv6 6rd tunnel connection. \
If 
the IPv4 network returns 6rd parameters to the router, the page adjusts to display the 
correct settings in this...

Specify Your Internet Settings 
33  AC1750 Smart WiFi Router
This setting specifies how the router assigns IPv6 addresses to the devices on your home 
network (the LAN). 
8. (Optional) Select the Use This Interface ID check box and specify the interface ID that you 
want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC 
address.
9. Click the Apply button.
Your settings are saved.
Set Up an IPv6 6to4 Tunnel...

Specify Your Internet Settings 34
AC1750
 Smart  WiFi Router 
The page adjusts:
The router automatically detects the information in the Router’s IPv6 Address on LAN 
field. This field shows the IPv6 address that is acquired for the router’s LAN interface. The 
number after the slash (/) is the length of the prefix, which is also \
indicated by the 
underline (_) under the IPv6 address. If no address is acquired, the f\
ield displays Not 
Available.
6.  Select a Remote 6to4 relay Router radio button:
•...

Specify Your Internet Settings 
35  AC1750 Smart WiFi Router
10. Click the Apply button.
Your settings are saved.
Set Up an IPv6 Pass Through Internet Connection
In pass-through mode, the router works as a Layer 2 Ethernet switch with two ports (LAN and 
WAN Ethernet ports) for IPv6 packets. The router does not process any IPv6 header packets.
To set up a pass-through IPv6 Internet connection:
1. Launch an Internet browser from a computer or wireless device that is connected to the 
network.
2. Type...

Specify Your Internet Settings 36
AC1750
 Smart  WiFi Router 
5. In the Internet Connection Type menu, select Fixed.
6. Configure the fixed IPv6 addresses for the WAN connection:
• IPv6 Address/Prefix 
 Length. The IPv6 address and prefix length of the router WAN 
interface.
• Default IPv6 Gateway . 
 The IPv6 address of the default IPv6 gateway for the router’s 
WAN interface.
• Primary DNS Server . 
 The primary DNS server that resolves IPv6 domain name 
records for the router.
• Secondary DNS Server ....

Specify Your Internet Settings 37
 AC1750
 Smart  WiFi Router
Set Up an IPv6 DHCP Internet Connection
To set up an IPv6 Internet connection with a DHCP server:
1. Launch an Internet browser from a computer or wireless device that is co\
nnected to the 
network.
2.  T
ype  http://www.routerlogin.net  or http://www.routerlogin.com .
A login window opens.
3.  Enter the router user name and password.
The user name is  admin. 
 The default password is password. The user name and 
password are...

Specify Your Internet Settings 
38 AC1750 Smart WiFi Router 
•Use These DNS Servers. If you know that your ISP requires specific servers, select 
this option. Enter the IP address of your ISP’s primary DNS server. If a secondary 
DNS server address is available, enter it also.
7. (Optional) In the User Class (If Required) field, enter a host name.
Most people can leave this field blank, but if your ISP gave you a specific host name, 
enter it here.
8. (Optional) In the Domain Name (If Required) field,...

Specify Your Internet Settings 39
 AC1750
 Smart  WiFi Router
5. In the Internet Connection Type  menu, select PPPoE.
6. Enter the settings that your service provider gave you.
If your service provider gave you only one user name and password, the s\
ervice provider 
most likely supports dual stack PPPoE (a single PPP session). If the s\
ervice provider 
gave you two user names and passwords for IPv4 and IPv6, then the router\
 must use 
dif

ferent PPP session. 
• T
o use separate PPP sessions (the...

Specify Your Internet Settings 
40 AC1750 Smart WiFi Router 
This is usually the name that you use in your email address. For example, if your main 
mail account is [email protected], you would type JerAB in this field. Some ISPs (like 
Mindspring, Earthlink, and T-DSL) require that you use your full email address when you 
log in. If your ISP requires your full email address, type it in this field.
8. In the Password field, enter the password for the ISP connection.
9. In the Service Name field, enter a...