Nitsuko Digital System Feature And Terminal Programming Manual

➣E- Trunks, E4- Next Trunk in Outbound Rotary (Hybrid Only)
Program the next trunk in the rotary.  (See the Line Rotaries feature.)  This options pertains to DISA
trunks when accessed by extension users for outgoing calls.
➣E- Trunks, E7- Trunk Service Number
Assign the DISA trunk to a service group.  ARS require the service number for routing when the system
uses the DISA trunk for normal outgoing calls.  Refer to Appendix A for ARS details. [1-10]
➣E- Trunks, E9- Direct Trunk Termination
Enter 300....

Feature Operation
To place a DISA call (from a telephone outside the system):
1. Dial telephone number for DISA trunk.
Listen for: Ringing, then dial tone from the system
2. Dial DISA access code.
Listen for: A second system dial tone
3. Dial code for system feature.
For example, you can dial an extension number or a code for a trunk.
If you hear busy tone after dialing an extension, you can dial another extension
If you hear busy tone after dialing a trunk code or feature, hang up and try again....

DIRECT STATION SELECTION, DSS CONSOLE
Description
A Direct Station Selection (DSS) Console gives a keyset user 80 keys for one-button access to extensions and se-
lected features. This saves time for users that do a lot of call processing.  A keyset user can have DSS Console
keys for:
•Hotline (to extensions)
•Park orbits
•Outside lines
•Page zones
•DSS Console Speed Dial (refer to Speed Dial)
•Release (always on key 80)
When programmed as a Hotline key, a DSS key shows at a glance the status of the...

Default Configuration
•DSS Console automatically enabled (circuit type 06) when you plug it in
•Each DSS Console assigned to extension 300
•Each DSS Console uses block (configuration) 01, with key assignments as follows:
KeyAssignment
1-47 Extensions 301-347
48-72 Undefined
73-76 Page zones 0-3
77-79 Park orbits 60-62
80 Release
Programming
Required Programming
➣E- Extensions, E2- Extension Circuit Type 
Program each DSS Console with circuit type 06 (even numbered ports only).  DSS Consoles are dual
port...

Feature Operation
To use your DSS Console keys:
1. Lift handset.
2. Press DSS Console key for desired function.
The function executes.
To use your DSS Console Hotline keys to Transfer your outside call:
You cannot Transfer an Intercom call.
1. Press ICM.
Listen for: Dial tone
If you are an attendant, skip this step unless you want to Transfer unscreened.
2. Press DSS Console Hotline key.
Listen for: Two beeps, ringing or busy
If you hear two beeps, you can announce the call.
If you hear ringing, you can...

DIRECT STATION SELECTION, EXTENSION
Description
Direct Station Selection (DSS) gives a keyset user simplified access and call Transfer to the extensions assigned
to their DSS keys.  DSS also provides a Busy Lamp Field for the assigned extensions.  With DSS, the user can
call or Transfer just by pressing ICM and a DSS key.  All keyset users have DSS capability on keys 1-15.  Each
extension user assigns their own DSS keys from their phone.
Once the user presses the ICM key, the DSS keys show at a glance...

Feature Operation
To program your DSS keys:
1. Lift handset.
2. Press ICM.
Listen for: Dial tone
If your extension has DSS denied in EH programming, ICM does not light.
3. Press PGM/#.
Listen for: Dial tone stops
4. Press DSS key you want to program.
5. Dial extension number you want DSS key to call.
Listen for: Dial tone stops
To clear a DSS key, press * instead of dialing the extension number.
User-Programmable Feature...
You can also use the procedure below to assign your keyset’s DSS keys.
PGM# + DSS...

DIRECT TRUNK ACCESS
Description
Direct Trunk Access lets an extension user access (seize) an individual trunk.  After seizing the trunk, the user
can dial any outside telephone number without toll restriction.  An extension’s Class of Service allows or denies
Direct Trunk Access.  The system administrator typically permits Direct Trunk Access for attendants and se-
lected extensions.  In addition to providing unrestricted dialing, Direct Trunk Access lets maintenance personnel
test individual trunks....

Feature Operation
To directly access a trunk for an outside call:
1. Lift handset.
2. Press ICM
Listen for: Dial tone
If you have an ESL set, skip this step.
3. Dial trunk extension number (e.g., 480).
Listen for: Dial tone
Features: Introduction - Direct Trunk Access
DIRECT TRUNK ACCESS
98   FEATURESN1870SWG04   Issue 1-0 

Features: Directed Call Pickup - Forced Trunk DisconnectDIRECTED CALL PICKUP
Description
Directed Call Pickup permits an extension user to intercept a call ringing another extension.  This allows a user
to conveniently answer a co-worker’s call from their own telephone.
Conditions 
The code to retrieve a Personal Park is the same as Directed Call Pickup and remote Hold Retrieve.  When a
user dials the code, the system picks up calls at the dialed extension in the following order:
1. Ringing Intercom...