Nitsuko Digital System Phone Program Record Form Manual

							Program 7 - Music, External Paging, Relays
Feature NameFeature 
Data
Background 
Music (BGM)
Music on Hold
External Page 
Zone 1
Ring Over All 
Call
External Page 
Zone 2
BGM to Ext. 
Zones
Interrupted 
Ring Relays
Page/Music 
Volume
Relay 01 Owner
Relay 02 Owner
To enter Program 7 data:
1. Enter program mode.
# + dial 775312 + #.
2. Press key 7.
3. To accept the displayed data: #.
OR
    To change the displayed data: Dial data + #.
To erase data before pressing #: Press *.
4. Repeat step 3 for all data.
If you finish and do not see, SAVE TO EXIT: SAVE. 
5. Select an option:
- To enter another program: Press its key.
- To exit program mode: SAVE.
Page 12 
						

							Program 8 - System Messages
Message No. Messages
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
To enter Program 8 data:
1. Enter program mode.
# + dial 775312 + #.
2. Press key 8.
3. Dial Message number + #.
4. To accept the displayed data: #.
OR
    To erase displayed data: Press * + Enter new message (see below) or press # and go to step 3.
OR
    To changed the displayed data: Enter entire message + #.
To enter message:
a. Press dialpad button for desired letter or number. To enter a blank space, Q, or Z: Press 0.
b. To make a letter appear: Dial the number (1, 2, or 3) that corresponds to the letters position on the
    button (e.g. dial 1 if you want the first letter).
OR
    To make a number appear: Dial 4.
    Note: To make a blank space, Q, or Z appear: Dial 1, 2, or 3, respectively. 
c. Repeat a-b for all characters (to erase previous character: LAST).
5. Repeat steps 3-4 for all messages.
6. Select an option:
- To exit Program 8: SAVE.
- To enter another program after exiting: Press its key.
- To exit program mode: SAVE twice.
Page 13 
						

							Program 10 - Line Port Characteristics
Line Number Circuit
 Type
 Line
 Gain
 PBX Line
 Side Tone TestName
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Contd next page
Page 14 
						

							Program 10 - Line Port Characteristics (contd)
To enter Program 10 data:
1. Enter program mode.
# + dial 775312 + #.
2. Press key 10.
3. Dial Line number + #.
4. To accept the displayed data: #.
OR
    To change the displayed data: Dial data + #.
- To erase data before pressing #: Press *.
-To enter circuit type X: DIAL + dial X.
- To enter a name:
a. Press dialpad button for desired character. To enter a blank space, Q, or Z: Press 0.
b. To make a letter appear: Dial the number (1, 2, or 3) that corresponds to the letters position
    on the button (e.g. dial 1 if you want the first letter).
OR
    To make a number appear: Dial 4.
   Note: To make a blank space, Q, or Z appear: Dial 1, 2, or 3, respectively.
c. Repeat a-b for all characters (to erase previous character: LAST).
5. Repeat step 4 for all data.
If you finish and do not see, LINE NO.: SAVE.
6. Select an option:
- To program another line: Go to step 3.
- To exit Program 10: SAVE.
- To enter another program after exiting: Press its key.
- To exit program mode: SAVE twice.
Page 15 
						

							Program 11 - Line Groups
Group Number Line Members
90
91
92
93
94
95
96
97
98
To enter Program 11 data:
1. Enter program mode.
# + dial 775312 + #.
2. Press key 11.
3. Dial Group number + #.
4. To accept the displayed data: #.
OR
    To enter or change the displayed data: Dial data + #.
- To erase data before pressing #: Press *.
- To erase a line from the group, dial *. Dialing * for the first member of the group erases
  the entire group. 
5. Repeat step 4 for all data in group.
6. Press SAVE. 
7. Select an option:
- To program another line group: Go to step 3.
- To exit Program 11: SAVE.
- To enter another program after exiting: Press its key.
- To exit program mode: SAVE twice.
Page 16 
						

							Program 12 - Line Features
Line Number CPG
 (Call Pickup Group)
 TR (Toll Restriction)
 DTD
 (Direct Termination
 Day)
 DTN
 (Direct Termination
 Night)
 COS
 (Class Of Service)
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Contd next page
Page 17 
						

							Program 12 - Line Features (contd)
To enter Program 12 data:
1. Enter program mode.
# + 775312 + #.
2. Press key 12.
3. Dial Line number + #.
4. Dial features abbreviation + #.
5. To accept the displayed data: #.
OR
    To change the displayed data: Dial data + #.
- To accept DTD or DTN data, you may have to press SAVE instead.
- To erase data before pressing #: Press *.
6. Repeat steps 4-5 for all features.
7. Press SAVE.
8. Select an option:
- To enter data for another line: Dial Y + go to step 3.
- To exit Program 12: SAVE.
- To enter another program after exiting: Press its key.
- To exit program mode: SAVE twice.
Page 18 
						

							Program 14 - Extension Port Characteristics
Port NumberExtension 
NumberCircuit 
TypeDSS OwnerDSS 
BlockName (16 characters, maximum)
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
*  Note:  A DSS console cannot be installed in an Expansion Cabinet.
Contd next page
Page 19 
						

							Program 14 - Extension Port Characteristics (contd)
Port NumberExtension 
NumberCircuit 
TypeDSS OwnerDSS 
BlockName (16 characters, maximum)
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
*  Note:  A DSS console cannot be installed in an Expansion Cabinet.
Contd next page
Page 20 
						

							Program 14 - Extension Port Characteristics (contd)
To enter Program 14 data:
1. Enter program mode.
# + dial 775312 + #.
2. Press key 14.
3. Dial Port number + #.
4. To accept the displayed data: #.
OR
    To change the displayed data: Dial data + #.
- To erase data before pressing #: Press *.
- To enter circuit X:DIAL + dial X.
- To enter circuit Z:DIAL + dial 0.
- To enter a letter, number, blank:
- Press dial pad button that has desired character. Zero button=blank, Q, Z (in that order).
- Dial digit (1, 2, 3)=letters position on button (e.g., dial 1 for 1st letter).
OR
   Dial 4 for the buttons number.
- To erase last character, press LAST.
- Repeat above steps for entire message.
5. Repeat step 4 for all data. 
If you finish and do not see, STN PORT NO.: SAVE.
6. Select an option:
- To program a port: Go to step 3.
- To exit Program 14: SAVE.
- To enter another program after exiting: Press its key.
- To exit program mode: SAVE twice.
Note: You cannot change the circuit type of the extension from which you are programming;
           you must use another extension that has program access level 04 or 05.
Page 21