Nitsuko Ds1000 Hardware Manual

4. Optional
Equipment
4-11
DOOR BOX OPERATION
Operating the Door Box
To place a call from the Door Box:
1. Press the Door Box call button.
2. When someone inside the building answers your call, speak
toward the Door Box.
To place a call to the Door Box:
1. Lift handset and press 
ICM
.
2. Dial the Door Box extension number.
To answer the Door Box chimes from a keyset:
1. Lift handset or press 
SPK
.To control the system relay which in turn controls the
door strike:
Once set up in programming, this option...

4-12
MUSIC SOURCE
Installing a Music Source (Figure 4-4)
Your system provides connection for a customer provided
music source. Use this music source for Background Music
and Music on Hold.
Be sure the connected music source is compatible with the fol-
lowing music input specifications:
Input Impedance: 10K Ohms
Output Level: +18 dBr @ 1.0 KHz
To connect a music source:
1. Connect the music source to the BLK and YEL lugs on the
Audio modular jack.
2. Plug a 6-conductor line cord into the AUDIO jack on...

4. Optional
Equipment
4-13
MUSIC SOURCE
Programming Background Music

0201: Background Music
Enter Y to enable Background Music system-wide. 
1802: BGM
Enter Y to enable Background Music at the extension.
Programming Music on Hold

0201: Music on Hold
Enter Y to enable Music on Hold system-wide. 
0201: MOH on Transfer
Enter Y to enable Music on Hold for transferred calls. 

4-14
POWER FAILURE TELEPHONE
Power Failure Cut-Through(Figure 4-5)
(Check the Release Notesthat came with your system for the
availability of this option.)
When AC power fails, the system can automatically cut through
to a Power Failure Telephone connection.
To install Power Failure Cut-Through:
1. Connect the GRN and RED lugs on the PFT/MDM modular
jack to the GRN and RED lugs on the Power Failure
Telephone’s mod jack.

To test the Power Failure Telephone:
1. Connect a power failure telephone per Figure...

4. Optional
Equipment
4-15
POWER FAILURE TELEPHONE
PFT
PFRPower Failure
Telephone
BLK YEL GRN RED
Power
Failure
TelephoneBLU-WHT WHT-BLU
625
Modular
Jack
BLK BLUE GRN
YEL
To PFT/MDM in
DS1000 cabinet
WHT RED
80200 - 21
NCNC
NCNC
Figure 4-5  CONNECTING A POWER FAILURE TELEPHONE 

4-16
DSS CONSOLE
Installing a DSS Console(Figures 4-6 and 4-7)
The DSS Console gives a keyset user a Busy Lamp Field (BLF)
and one-button access to extensions, trunks and system features.
Keep the following in mind when installing DSS Consoles:

You can only connect 4 DSS Consoles.


You can only connect DSS Consoles to Super Display or
34-Button Display telephones.


A DSS Console does not require a separate station port – it
connects directly to the keyset.

To install a DSS Console:
1. Turn the...

4. Optional
Equipment
4-17
DSS CONSOLE
Figure 4-6  INSTALLING A 110-BUTTON DSS CONSOLE Figure 4-7  INSTALLING A 24-BUTTON DSS CONSOLE
80000 - 47
To 625 Modular Jack
DSS Console Keyset
80000 - 44
To 625 Modular Jack
DSS Console Keyset 

4-18
WALL-MOUNT KIT
Installing the Wall-Mount Kit
You can use a wall-mount kit to attach any key telephone to a
wall. The wall-mount kit includes a mounting bracket, wall-
mount screws and a handset hanger.
Installing the Wall-Mount Handset Hanger (Figure 4-8)
1. Remove the rubber plug that covers the slots for the handset
hanger. Store the plug in a safe place.
2. Insert the handset hanger in the slot provided beneath the
telephone’s hookswitch.
Figure 4-8  INSTALLING THE WALL-MOUNT HANGER
80000 - 38 

4. Optional
Equipment
4-19
WALL-MOUNT KIT
Wall-Mounting a Key Telephone (Figures 4-9
through 4-11)

To mount the telephone on the wall(Figure 4-9):
1. Using the screws provided, attach the wall-mount bracket to
the wall in the desired location.
2. Plug in the telephone’s modular line cord.
3. Run the telephone’s line cord through one of the slots in the
bottom of the wall-mount bracket.
4. Plug the line cord into the telephone’s 625 modular jack.
5. Place the telephone on top of the wall-mount bracket...

4-20
WALL-MOUNT KIT

To mount the telephone on a wall plate(Figure 4-10):
1. Snap the wall-mount bracket onto the wall plate.
2. Plug the telephone’s line cord into the jack in the wall plate
and into the telephone.
3. Place the telephone on top of the wall-mount bracket and
snap into place.
Figure 4-10  MOUNTING ON A WALL PLATE
80000 - 43
Tab on phone must snap
into cutout on wall mount bracket