Home > Nokia > Telephone > Nokia 5800d1 Owners Manual

Nokia 5800d1 Owners Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Nokia 5800d1 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 96 Nokia manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							and fees associated with using this service, contact your
    service provider.
    To use video sharing, ensure the following:
    ●Your device is set up for person-to-person connections.
    ●You have an active 3G connection and are within 3G
    network coverage. If you move outside the 3G network
    during a video sharing session, the sharing stops, while
    your voice call continues.
    ●Both the sender and recipient are registered to the 3G
    network. If you invite someone to a sharing session and
    the recipient’s device is not within 3G network coverage
    or does not have video sharing installed or person-to-
    person connections set up, the recipient does not receive
    invitations. You receive an error message that indicates
    that the recipient cannot accept the invitation.Video sharing settingsTo set up video sharing, you need person-to-person and 3G
    connection settings.
    A person-to-person connection is also known as a Session
    Initiation Protocol (SIP) connection. The SIP profile settings
    must be configured in your device before you can use video
    sharing. Ask your service provider for the SIP profile settings,
    and save them to your device. Your service provider may send
    you the settings or give you a list of the needed parameters.Add a SIP address to a contact1. Select Menu > Contacts.
    2. Select a contact or create a new contact.
    3. Select Options > Edit.
    4. Select Options > Add detail > Share video.
    5. Enter the SIP address in the format
    username@domainname (you can use an IP address
    instead of a domain name).
    If you do not know the SIP address for the contact, you
    can use the phone number of the recipient, including the
    country code, to share video (if supported by the network
    service provider).
    Set up your 3G connection —  Contact your service provider
    to establish an agreement for you to use the 3G network.
    Ensure that the 3G access point connection settings for your
    device are configured properly. For more information about
    the settings, contact your service provider.Share live video or video clipsDuring an active voice call, select Options > Share video.Share live video during a call1. Select Live video.
    2. Select Video clip and the clip you want to share.
    You may need to convert the video clip into a suitable
    format to be able to share it. If your device notifies you
    that the video clip must be converted, select OK. Your
    device must have a video editor for the conversion to
    work.
    3. If the recipient has several SIP addresses or phone
    numbers saved in your contacts list, select the desired
    Make calls
    © 2011 Nokia. All rights reserved.31 
    						
    							address or number. If the SIP address or phone number
    of the recipient is not available, enter the address or
    number of the recipient, including the country code, and
    select OK to send the invitation. Your device sends the
    invitation to the SIP address.
    Sharing begins automatically when the recipient accepts
    the invitation.Options during video sharing or 
      Mute or unmute the microphone.
     or 
      Switch the loudspeaker on or off
     or 
      Pause or resume video sharing.
       Switch to full screen mode (receiver only).
    End the video sharing session —  Select Stop. To end the
    voice call, press the end key. When you end the call, video
    sharing also ends.
    Save the live video you shared —  Select Yes when
    prompted.
    If you access other applications while you are sharing a video
    clip, the sharing is paused. To return to the video sharing view
    and to continue sharing, in the home screen, select
    Options > Continue.
    Accept a video sharing invitationWhen someone sends you a video sharing invitation, the
    invitation message displays the sender’s name or SIP
    address.
    If someone sends you a sharing invitation and you are not
    within 3G network coverage, you will not receive the
    invitation.
    Accept the received invitation —  Select Yes. The sharing
    session is activated.
    Reject the received invitation —  Select No. The sender
    receives a message that you rejected the invitation. You can
    also press the end key to reject the invitation and end the
    voice call.
    End the sharing session —  Select Stop or end the voice call.
    When you end the call, video sharing also ends.Log The Log application stores information about the
    communication history of the device. The device registers
    missed and received calls only if the network supports these
    functions, and the device is switched on and within the
    network service area.Recent callsYou can view information about your recent calls.
    Select Menu > Log and Recent calls.
    View missed, received, and dialled calls —  Select Missed
    calls, Received calls, or Dialled numbers.
    Tip: To open the dialled numbers list in the home
    screen, press the call key.
    Select Options and from the following:
    Make calls
    © 2011 Nokia. All rights reserved. 32 
    						
    							●Save to Contacts  — Save a phone number from a recent
    calls list to your contacts.
    ●Clear list  — Clear the selected recent calls list.
    ●Delete  — Clear an event in the selected list.
    ●Settings  — Select Log duration and the length of time
    that the communication information is saved in the log. If
    you select No log, no information is saved in the log.Packet dataSelect Menu > Log.
    You may be charged for your packet data connections by the
    amount of data sent and received.
    Check the amount of data sent or received during packet
    data connections —  Select Data counter > All sent data
    or All received data.
    Clear both sent and received information —  Select Data
    counter > Options > Clear counters. You need the lock
    code to clear the information.Call durationYou can view the approximate duration of your last call,
    dialled and received calls, and all calls.
    Select Menu > Log and Call duration.Monitor all communication eventsIn the general log, you can view information on
    communication events, such as voice calls, text messages, or
    data and wireless LAN (WLAN) connections registered by your
    device.
    Select Menu > Log.
    Open the general log —  Open the general log tab 
    .
    S u b e v e n t s ,  s u c h  a s  a  t e x t  m e s s a g e  s e n t  i n  m o r e  t h a n  o n e  p a r t
    and packet data connections, are logged as one
    communication event. Connections to your mailbox,
    multimedia messaging centre, or web pages are shown as
    packet data connections.
    View the packet data connection details —  Go to an
    incoming or outgoing packet data connection event
    indicated with GPRS, and select Options > View.
    Copy a phone number from the log —  Select Options >
    Use number > Copy. You can, for example, paste the phone
    number to a text message.
    Filter the log —  Select Options > Filter and a filter.
    Define the log duration —  Select Options > Settings >
    Log duration. If you select No log, all the log contents, recent
    calls register, and messaging delivery reports are
    permanently deleted.
    Make calls
    © 2011 Nokia. All rights reserved.33 
    						
    							5. Write textYou can enter letters, numbers, and special characters in
    several different ways. The on-screen keyboards allow you to
    enter characters by tapping them with your fingers or the
    stylus. Handwriting recognition allows you to write
    characters directly onto the screen using the stylus as a pen.
    Tap any text input field to enter letters, numbers, and special
    characters.
    Your device can complete words based on the built-in
    dictionary for the selected text input language. The device
    also learns new words from your input.On-screen keyboardYou can use the on-screen keyboard in landscape mode.
    To activate the on-screen keyboard, select 
     and Full
    screen QWERTY.
    When using the on-screen keyboard in landscape mode and
    in full screen mode, you can select the keys with your fingers.
    For an explanation of each key and its function, see the
    following figure.
    1 — Close - Close the on-screen keyboard.
    2 — Input menu - Open the touch input options menu to
    access commands such as Writing language.
    3 — On-screen keyboard
    4 — Shift and caps lock - To enter an uppercase character
    when writing in lowercase, or vice versa, select the key before
    entering the character. To activate the caps lock, select the
    key twice. A line under the key indicates that the caps lock is
    activated.
    5 — Letters - Enter letters.
    6 — Numbers and symbols - Enter numbers and most
    commonly used special characters.
    7 — Character accents - Select language character accents.
    8 — Space bar - Insert a space.
    9 — Arrows - Move the cursor backward or forward.
    10 — Backspace - Delete the previously entered character.
    11 — Enter - Move the cursor to the next row or text input
    field. Additional functions are based on the current context
    (for example, in the web address field of the web browser, it
    acts as the Go button).
    12 — Input mode - Select the input method. When you select
    an item, the current input method view closes, and the
    selected one opens.
    Write text
    © 2011 Nokia. All rights reserved. 34 
    						
    							HandwritingTo activate handwriting mode, tap 
     and Handwriting.
    Write legible, upright characters on the text input area, and
    leave a space between each character.
    To teach the device your handwriting style, tap 
     and
    Handwriting training.
    To enter letters and numbers (default mode), write words as
    you would normally. To select number mode, tap  in the
    right pane of the input area. To enter non-Latin characters,
    tap the corresponding icon, if available. 
    To write special characters, write
    them as you would normally. You
    can also tap 
     in the right pane of
    the input area, and select a desired
    character from the pop-up table.
    To delete characters or move the
    cursor back, swipe backwards (see Figure 1). To insert a
    space, swipe forwards (see Figure 2).
    Alphanumeric keypadVirtual keypadWith the virtual keypad (Alphanumeric keypad), you can
    enter characters like you would with a traditional physical
    keypad with numbers on the keys.
    1 — Close - Closes the virtual keypad (Alphanumeric
    keypad).
    2 — Input menu - Opens the touch input menu, which
    includes commands such as Activate predictive text and
    Writing language.
    3 — Text input indicator - Opens a pop-up window, in which
    you can activate or deactivate predictive text input modes,
    change the character case, and switch between letter and
    number modes.
    4 — Input mode - Opens a pop-up window, in which you can
    select the input mode. When you tap an item, the current
    input method view closes, and the selected one opens. The
    Write text
    © 2011 Nokia. All rights reserved.35 
    						
    							availability of input modes may vary depending on whether
    the automatic input mode (sensor settings) is activated or
    not.
    5 — Arrow keys - Scroll left or right.
    6 — Backspace
    7 — Numbers
    8 — Star - Opens a special characters table.
    9 — Shift - Changes the character case, activates or
    deactivates predictive text input modes, and switches
    between letter and number modes.Traditional text inputTap a number key (1-9) repeatedly until the desired character
    appears. There are more characters available for a number
    key than are visible on the key.
    If the next letter is located on the same key as the present
    one, wait until the cursor appears (or move the cursor
    forward to end the time-out period), and enter the letter.
    To insert a space, tap 0. To move the cursor to the next line,
    tap 0 three times.Predictive text inputWith predictive text input, to enter a word, select one number
    key for each letter in the word. Predictive text input is based
    on a built-in dictionary to which you can add new words.
    Predictive text input is not available for all languages.
    1. To activate predictive text input for all editors on the
    device, select 
     > Activate prediction.
    2. Write a word. For example, to write Nokia when the
    English dictionary is selected, select 6 for N, 6 for o, 5 for
    k, 4 for i, and 2 for a.
    The word suggestion changes after each key selection.
    3. If the word is not correct, select * repeatedly, until the
    correct match is displayed. If the word is not in the
    dictionary, select Spell, enter the word using traditional
    text input mode, and select OK.
    If ? is displayed after the word, the word is not in the
    dictionary. To add a word to the dictionary, select *, enter
    the word using traditional text input mode, and select
    OK.
    4. To insert a punctuation mark, select *.
    5. To insert a space, select 0.Switch between text modesTo deactivate predictive text input for all editors in your
    device, select 
     > Deactivate prediction, or quickly
    double-tap #. Alternatively, you can select 
     > Predictive
    text > Off.
    Touch input settingsSelect Menu > Settings and Phone > Touch input.
    To configure text input settings for the touch screen, select
    from the following:
    ●Handwriting training  — Open the handwriting training
    application. Train the device to recognise your
    Write text
    © 2011 Nokia. All rights reserved. 36 
    						
    							handwriting better. This option is not available in all
    languages.
    ●Writing language  — Define which language-specific
    characters in your handwriting are recognised and how
    your on-screen keyboard is laid out.
    ●Writing speed  — Adjust the speed at which handwriting
    is recognised.
    ●Guiding line  — Show or hide the guiding line in the
    writing area. The guiding line helps you write in a straight
    line, and it also helps the device recognise your writing.
    This option may not be available in all languages.
    ●Pen trail width  — Change the thickness of the text.
    ●Writing colour  — Change the colour of the text.
    6. Contacts (phonebook)You can save and update contact information, such as phone
    numbers, home addresses, or e-mail addresses of your
    contacts. You can add a personal ringing tone or a thumbnail
    image to a contact. You can also create contact groups, which
    allow you to send text messages or e-mail to many recipients
    at the same time.
    To open the contacts list, in the home screen, select 
    .
    Save and edit names and numbersSelect Menu > Contacts.Add a new contact to the contacts list1. Select 
    .
    2. Select a field to enter information. To close the text input,
    select . Fill in the appropriate fields, and select Done.
    Edit contacts —  Select a contact and Options > Edit.
    Contacts toolbarSelect Menu > Contacts.
    Call a contact —  Go to a contact, and select 
    .
    Send a message to a contact —  Go to a contact, and select
    .
    Create a new contact —  Select 
    .
    Manage names and numbersSelect Menu > Contacts.
    Delete contacts —  Select a contact and Options > Delete.
    To delete several contacts at the same time, select Options >
    Mark/Unmark to mark the desired contacts, and to delete,
    select Options > Delete.
    Copy contacts —  Select the contact, Options > Copy, and
    the desired location.
    Contacts (phonebook)
    © 2011 Nokia. All rights reserved.37 
    						
    							Add contacts to favourites —  Tap and hold a contact, and
    select Add to favourites.
    Listen to the voice tag assigned to a contact —  Select the
    contact and Options > Voice tag details > Options >
    Play voice tag.
    Before using voice tags, note the following:
    ●Voice tags are not language-dependent. They are
    dependent on the speakers voice.
    ●You must say the name exactly as you said it when you
    recorded it.
    ●Voice tags are sensitive to background noise. Record voice
    tags and use them in a quiet environment.
    ●Very short names are not accepted. Use long names, and
    avoid similar names for different numbers.
    Note: Using voice tags may be difficult in a noisy
    environment or during an emergency, so you should not rely
    solely upon voice dialling in all circumstances.
    Assign default numbers and
    addressesIf a contact has several numbers or addresses, a default
    number or address makes it easier for you to call or send a
    message to the contact. The default number is also used in
    voice dialling.
    1. Select Menu > Contacts.
    2. Select a contact and Options > Defaults.
    3. Select a default to which you want to add a number or an
    address, and select Assign.
    4 . S e l e c t  a  n u m b e r  o r  a n  a d d r ess you want to set as a default.
    5. To exit the Defaults view and save the changes, tap
    outside the view.Ringing tones, images, and call text
    for contactsYou can define a ringing tone for a contact or contact group,
    and an image and call text for a contact. When the contact
    calls you, the device plays the selected ringing tone and
    shows the call text or image (if the caller’s phone number is
    sent with the call and your device recognises it).
    Select Menu > Contacts.
    Add more fields to a contact details view —  Select the
    contact and Options > Edit > Options > Add detail.
    Define a ringing tone for a contact or contact group — 
    Select the contact or contact group and Options > Ringing
    tone, and select a ringing tone.
    Remove the ringing tone from a contact —  Select Default
    tone from the list of ringing tones.
    Add an image for a contact  —  Select a contact saved in the
    device memory and Options > Edit > Add image, and
    select an image from Gallery.
    Define a call text for a contact —  Select the contact and
    Options > Edit > Add call alert text. Enter the call text,
    and select 
    .
    Contacts (phonebook)
    © 2011 Nokia. All rights reserved. 38 
    						
    							View, change or remove the image from a contact1. Select a contact and Options > Edit.
    2. Go to Image, and select Options and the desired option.Copy contactsSelect Menu > Contacts.
    When you open the contacts list for the first time, the device
    asks if you want to copy names and numbers from the SIM
    card to your device.
    Start copying —  Select OK.
    Cancel copying —  Select Cancel. The device asks if you want
    to view the SIM card contacts in the contacts list. To view the
    contacts, select OK. The contacts list opens, and the names
    stored on your SIM card are indicated with 
    .
    SIM servicesFor availability and information on using SIM card services,
    contact your SIM card vendor. This may be the network
    service provider or other vendor.SIM contactsThe number of contacts that can be stored on the SIM card is
    limited.
    Display contacts stored on the SIM card in the contacts
    list —  Select Options > Settings > Contacts to display >
    SIM memory.
    The numbers you save in the contacts list may not be
    automatically saved to your SIM card.
    Copy contacts to the SIM card —  Go to a contact, and select
    Options > Copy > SIM memory.
    Select the default memory where to save the new
    contacts —  Select Options > Settings > Default saving
    memory > Phone memory or SIM memory.
    Contacts stored in the device memory can contain more than
    one phone number and an image.Fixed diallingWith the fixed dialling service, you can restrict calls from your
    device to certain phone numbers. Not all SIM cards support
    the fixed dialling service. For more information, contact your
    service provider.
    Select Menu > Contacts and Options > SIM numbers >
    Fixed dial contacts.
    When security features that restrict calls are in use (such as
    call barring, closed user group, and fixed dialling), calls may
    be possible to the official emergency number programmed
    into your device. Call barring and call diverting cannot be
    active at the same time.
    You need your PIN2 code to activate and deactivate fixed
    dialling or edit your fixed dialling contacts. Contact your
    service provider for your PIN2 code.
    Select Options and from the following:
    ●Activate fixed dialling or Deactivate fixed
    dialling — Activate or deactivate fixed dialling.
    Contacts (phonebook)
    © 2011 Nokia. All rights reserved.39 
    						
    							●New SIM contact  — Enter the contact name and phone
    number to which calls are allowed.
    ●Add from Contacts  — Copy a contact from the contacts
    list to the fixed dialling list.
    To send text messages to the SIM contacts while the fixed
    dialling service is active, you need to add the text message
    centre number to the fixed dialling list.
    7. MessagingMessaging main viewSelect Menu > Messaging (network service).
    Create a new message —  Select New message.
    Tip: To avoid rewriting messages that you send often,
    use saved messages in the Templates folder in My
    folders. You can also create and save your own
    templates.
    Messaging contains the following folders:
    ● Inbox  — Received messages, except e-mail and cell
    broadcast messages.
    ● My folders  — Organise your messages into folders.
    ● Mailbox  — Connect to your remote mailbox to
    retrieve your new e-mail messages, or view your
    previously retrieved e-mail messages offline.
    ● Drafts  — Draft messages that have not been sent.
    ● Sent  — The last messages that have been sent,
    excluding messages sent using Bluetooth connectivity.
    You can define the number of messages that can be saved
    in this folder.
    ●
     Outbox  — Messages waiting to be sent are temporarily
    stored in the Outbox, for example, when your device is
    outside network coverage.
    ● Delivery reports  — Request the network to send you
    a delivery report of the text messages and multimedia
    messages you have sent (network service).
    Write and send messagesSelect Menu > Messaging.
    Important: Exercise caution when opening messages.
    Messages may contain malicious software or otherwise be
    harmful to your device or PC.
    Before you can create a multimedia message or write a mail,
    you must have the correct connection settings defined.
    The wireless network may limit the size of MMS messages. If
    the inserted picture exceeds this limit, the device may make
    it smaller so that it can be sent by MMS.
    Only devices that have compatible features can receive and
    display multimedia messages. The appearance of a message
    may vary depending on the receiving device.
    Messaging
    © 2011 Nokia. All rights reserved. 40 
    						
    All Nokia manuals Comments (0)

    Related Manuals for Nokia 5800d1 Owners Manual