Nortel T7406 Cordless Telephone Installation Guide

Handset Configuration / 31
T7406 Installation Guide
 If you want to change the number, follow these steps:
a. Press 
.
The display shows 
	. (six digits)
b. Enter the default password (000000).
c. Press 

 to accept the code.
The display shows 

 !.
The current 
Handset ID # is displayed on the bottom left of the 
LCD.
d. Press the digit that you want to assign to this handset.
e. Press 

.
The display shows 
	.
Changing the Handset ID Password
After you...

32 / Handset Configuration
P0606142 01
6. Press 
.
The display shows 
	&.
7. Re-enter the password.
8. Press 

.
The display shows
$	
.
9. Press the Options button to exit the Option menu
The display changes to show the date and time.
Password errors
If you enter an incorrect password and the display shows , 
return to the 
#$
 menu item and try again.
Lost password
Make a note of the new password. If you forget your password, you will 
need to contact your...

Setting Handset Features / 33
T7406 Installation Guide
If you are assigning the first handset to a new base station (which has 
no security code), continue with the following steps:
9. The display shows 
(


),  press  to get ready to 
send the security code to the base station. 
The display shows 
*
	

.
10. Unplug the AC power adapter connected to the base station, and 
plug it back in again.
11. Within 15 seconds, press and hold the 

 button for five seconds. 
This sends...

34 / Setting Handset Features
P0606142 01
1. Press the Options button.
2. Press 


.
The display shows 
 +	
,-.
3. Press 


. The display shows +	
,-) .
Note:There is also a Ringer Off setting.
4. Press 
 to listen to the four different rings available on your 
handset.
5. Press 

 to accept the ring type of your choice.
6. Press the Options button to exit the Option menu.
The display changes to show the date and time.
Note:Ring Type can only be set through the Option menu on the...

Setting Handset Features / 35
T7406 Installation Guide
3. Press  until:
The display shows 
123	.
4. Press 

 to lock the handset.
The display shows 
	123.
5. Press the Options button to exit the Option menu.
The display changes to show the date and time.
To release the Handset Locked state, press the 
® button, then press 
•.
Lock Handset notes:
 An incoming call will automatically release the handset from 
Handset Lock mode.
 The handset cannot be locked while you are on a...

36 / Setting Handset Features
P0606142 01
Priority call: If a Priority call is made to your T7406 telephone that 
does not have DND active, and the call is answered but the originating 
caller then releases the call, you must still press an intercom line and 
the ≥ button before the line is actually released. If you choose not to 
do this, the handset stops providing ring notification of incoming calls, 
refer to Ring Notification.
Voice Call Deny (F88): This feature has been purposely set as the...

Button Mapping on the Handset / 37
T7406 Installation Guide
Button Mapping on the Handset
When you have completed the steps in Handset Configuration on page 
27, then, you can map the feature buttons on your set.
The handsets have six feature buttons. These buttons can be 
programmed by your system administrator. You can also program the 
buttons from your handset. The following section describes the usual 
mapping of the buttons, based on the M7310 telephone button mapping.
The illustration below shows...

38 / Button Mapping on the Handset
P0606142 01
T7316 to T7406 
T7316E to T7406 
For more information, refer to Programming memory buttons
 on page 
39.
T7316 TelephoneT7406 Handset
T7316E TelephoneT7406 Handset 

Button Mapping on the Handset / 39
T7406 Installation Guide
Memor y buttons
Memory buttons are buttons on the handset that are assigned to 
functions other than Intercom or line buttons. For more information, 
refer to Button Mapping on the Handset
 on page 37.
Programming memory buttons
You can program memory buttons with:
 external autodial numbers
 internal autodial numbers
features
After you have programmed the memory buttons, record the names and 
numbers on the handset card. For more...

40 / Button Mapping on the Handset
P0606142 01
2. Press a memory button.
3. Dial the internal number.
4. Press 

 to store the number.
5. Label the button.
Features
To program a feature memory button:
1. Press ≤•‹.
2. Press a memory button.
3. Press ≤ and enter the feature code.
4. Press 

 to store the feature code.
5. Label the button.
Refer to System Feature codes
 on page 40 for a list of the most common 
features. Your system administrator can also provide a list of all the 
feature codes that are...