OKI C3300N User Manual

Loading Paper> 21
LOADING PAPER
CASSETTE TRAY
1.Remove the Cassette Tray from the printer.
2.
Fan the paper to be loaded at the edges (1) and in the 
middle (2) to ensure that all sheets are properly separated, 
then tap the edges of the stack  on a flat surface to make it 
flush again.(3).
123
Downloaded From ManualsPrinter.com Manuals 

Loading Paper> 22
3.Adjust the Rear Stopper (1) and Paper Guides (2) to the 
size of paper being used. Use the markings on the printer 
as a guide.
4. Load the paper (1). Use the level indicators (2) as a guide. 
For letter headed paper, load face down with top edge 
towards the front of the printer.
1
2
1
2
Downloaded From ManualsPrinter.com Manuals 

Loading Paper> 23
To prevent paper jams:
• Do not leave space between the paper and the guides and rear stopper.
• Do not overfill the Cassette Tray. Capacity depends on  the type of paper stock.
• Do not load damaged paper.
• Do not load paper of different sizes or types at the  same time.
• Do not pull the Cassette Tray out during printing.
5. Close the Cassette Tray gently.
Downloaded From ManualsPrinter.com Manuals 

Loading Paper> 24
6.For face down printing, make sure the Face Up (rear) 
Stacker is closed (the paper exits from the top of the 
printer). Stacking capacity is approximately 150 sheets, 
depending on paper weight.
7. For face up printing, make sure the Face Up (rear) Stacker 
is open and the paper support (1) is extended. Paper is 
stacked in reverse order and tray capacity is 
approximately 10 A4 sheets, depending on paper weight, 
or 1 envelope or 1 sheet of heavier media.
8. Always use the Face Up...

Loading Paper> 25
MULTI PURPOSE TRAY
1.Open the Multi Purpose Tray and press gently down on the 
Paper Platform (2) to ensure it is latched down.
2. Adjust the Paper Guides (1) to the size of paper you are 
going to print on, using the markings on the Paper 
Platform.
3. Position a sheet of paper on the Paper Platform so that it 
is gripped in place.
• Load your chosen media one sheet at a time.
• When printing on headed paper load the paper into the 
Multi Purpose Tray with pre-printed side up and top...

Printing from Windows> 26
PRINTING FROM WINDOWS
Your printer’s menus provide access to many options. See “Using 
the printer software” on page 83  for more information.
The Windows printer driver also contains settings for many of 
these items. Where items in the printer driver are the same as 
those in the menus, and you print documents from Windows, the 
settings in the Windows printer driv er will override those items in 
the menus.
The illustrations in this chapter show the C3400n printer in...

Printing from Windows> 27
PRINTING PREFERENCES IN WINDOWS APPLICATIONS
When you choose to print your document from a Windows 
application program a Print dialog box appears. This dialog 
usually specifies the name of the printer on which you will print 
your document. Next to the printer name is a  Properties button.
When you click  Properties a new window opens which contains 
a short list of the printer settings available in the driver, which 
you can choose for this document. The settings available...

Printing from Windows> 28
SETUP TAB
When you click the Properties button from your application’s 
Print dialog, the driver window opens to allow you to specify your 
printing preferences for the current document.
1. Paper size should be the same as the page size of your 
document (unless you wish to scale the printout to fit 
another size), and should also be the same as the size of 
paper you will feed into the printer.
2. You can choose the source of the paper to feed, which 
may be Tray 1 (the...

Printing from Windows> 29
5.A variety of document finishing options can be selected, 
such as normal one page per sheet, or N-up (where N can 
be a maximum of 16) for printing scaled down pages at 
more than one page per sheet.
Select the Poster printing option to print large pages as 
tiles spread over multiple sheets.
6. You can choose to print on one side of a sheet only or to 
use 2-sided printing (duplex pr inting). Your printer allows 
you to carry out manual duplex printing, meaning you 
must...

Printing from Windows> 30
JOB OPTIONS TAB
1.The output resolution of the  printed page can be set as 
follows.
• The ProQ2400 setting prints at 600 x 600dpi multi- level. This setting requires  the most printer memory 
and takes the longest to print. It is the best option for 
printing photographs and reproducing colour details.
• The Fine/Detail setting prints at 1200 x 600dpi is the  best option for printing vector objects such as graphics 
and text.
• The Normal setting prints at 600 x 600dpi and is...