OKI C3600n User Manual

							Menu functions > 21
MENUS
INFORMATION MENU
This menu provides a quick method of listing various items stored within the printer.
SHUTDOWN MENU
This menu only appears if ENABLE is selected in ADMIN menu.
PRINT MENU
This menu provides adjustment of various print job related functions.
ITEMACTIONEXPLANATION
PRINT MENU MAP EXECUTE Prints complete menu listing with current settings shown.
NETWORK EXECUTE Prints Network configuration information.
PRINT FILE LIST EXECUTE Prints a list of overlays, macros, fonts and other files stored on 
the printer’s hard disk drive (if installed).
PRINT PCL FONT EXECUTE Prints complete list of all internal PCL fonts plus those stored in 
ROM (slot 0), flash memory and in hard disk (if installed).
PRINT PSE FONT EXECUTE Prints complete list of all internal PostScript emulation fonts.
PRINT PPR FONT EXECUTE Prints complete list of all internal IBM ProPrinter III XL emulation 
fonts, including any downloaded to flash memory or hard disk.
PRINT FX FONT EXECUTE Prints complete list of all internal Epson FX emulation fonts, 
including any downloaded to flash memory or hard disk.
DEMO1 EXECUTE Prints demonstration page containing graphics and text in colour 
and monochrome.
PRINT ERROR LOG EXECUTE Prints a list of all errors and warnings experienced.
USAGE REPORT EXECUTE Scroll down to this parameter and select execute to print out a 
list of colour and mono pages printed.
COLOR PROF LIST EXECUTE Prints a list of stored colour profiles.
ITEMSETTINGSEXPLANATION
SHUTDOWN 
STARTEXECUTE Performs controlled shutdown of the printer, ensuring that all files are closed 
before power is turned off. Only power the printer off when the display indicates 
that shutdown is complete.
ITEMSETTINGSEXPLANATION
COPIES1-999 Enter the number of copies of a document to be printed from 1 to 
999.
MANUAL FEED ON
OFFWhen ON, paper is fed from the multi purpose tray. 
MEDIA CHECKENABLE
DISABLEDetermines whether the printer check the size of paper loaded 
matches that required for the document sent to print.
RESOLUTION 600DPI
600 x 1200DPI
600DPI M-LEVELSets the default resolution for printing (dots per inch). 
600x1200DPI uses more memory and requires more time to 
process, but prints at a higher quality.
TONER SAVE 
MODEON
OFFReduces the amount of toner used for imaging. Toner saving 
gives lighter prints but is more economical.
Downloaded From ManualsPrinter.com Manuals 
						

							Menu functions > 22
MEDIA MENU
This menu provides adjustment to suit a wide range of print media.
MONO-PRINT 
SPEEDAUTO SPEED
NORMAL SPEED 
COLOR SPEED If the first page of a print job is black and white, the printer runs 
at 20ppm (pages per minute). When a colour page is detected the 
printer slows down to 16ppm.
This setting operates in the same way as AUTO SPEED, except 
that the printer runs at 20ppm until a colour page is detected, 
when it switches to 16PPM. This setting is therefore most 
appropriate when the majority of print jobs are entirely black and 
white.
The printer runs at 16ppm for all print jobs. This setting is most 
appropriate when the majority of print jobs are in colour.
ORIENTATIONPORTRAIT
LANDSCAPESelects default page orientation between portrait (tall) and 
landscape (wide). - (PCL, IBMPPR & EPSON FX only)
LINES PER 
PAGE5~64~128 Sets the number of lines of text per page when raw text is 
received from systems other than Windows. The default for A4 
portrait is 65, and for Letter is 60. - (PCL only)
EDIT SIZECASSETTE SIZE
A4 /A5/ A6 / B5 
LEGAL14
LEGAL13.5
LEGAL13
LETTER
EXECUTIVE
CUSTOM
COM-9 ENVELOPE 
COM-10 ENVELOPE 
MONARCH ENVELOPE
DL ENVELOPE
C5 ENVELOPESets the size of the printable page area to match the size of paper 
in use. This is not the same as the physical paper size, which is 
always slightly larger. For dimensions of physical page sizes, see 
“Paper Recommendations” section in this guide. 
ITEMSETTINGSEXPLANATION
TRAY 
PAPERSIZEA4 /A5/ A6/
B5/LEGAL14/
LEGAL13.5/
LEGAL13/
LETTER/
EXECUTIVE
CUSTOMSelects the size of paper loaded in the Cassette Tray. For CUSTOM 
setting see X-DIMENSION and Y-DIMENSION later in this table.
TRAY 
MEDIATYPEPLAIN
LETTERHEAD
BOND
RECYCLED
ROUGH
GLOSSY
USERTYPE1
USERTYPE2
USERTYPE3
USERTYPE4
USERTYPE5Selects the type of media loaded in this tray. This will help the printer 
to adjust its internal operating parameters, such as engine speed and 
fusing temperature, to better accommodate the media to be fed. For 
example, letterhead may benefit from a slightly lower fusing 
temperature to ensure that its ink does not offset.
Note: USERTYPEn are displayed only if registered in the host PC/
Server.
TRAY 
MEDIAWEIGHTLIGHT 
MEDIUM 
HEAVY Adjusts the printer for the weight of paper stock loaded in this tray.
ITEMSETTINGSEXPLANATION
Downloaded From ManualsPrinter.com Manuals 
						

							Menu functions > 23 MF PAPERSIZE LETTER
EXECUTIVE
LEGAL14
LEGAL13.5
LEGAL13
A4 / A5 / A6 / 
B5
CUSTOM
COM-9 
ENVELOPE
COM-10 
ENVELOPE
MONARCH ENV
DL ENVELOPE
C5 ENVELOPESelects the size of paper to be fed from the multi purpose tray. For 
CUSTOM setting see X-DIMENSION and Y-DIMENSION later in this 
table.
MF MEDIATYPEPLAIN
LETTERHEAD
LABELS
BOND
RECYCLED
CARD STOCK
ROUGH
GLOSSY
USER TYPE 1
USER TYPE 2
USER TYPE 3
USER TYPE 4
USER TYPE 5Selects the type of media to be fed from the multi purpose tray so that 
the printer can adjust its internal parameters to better accommodate 
the selected type of media.
MF 
MEDIAWEIGHTLIGHT 
MEDIUM 
HEAVY
ULTRA HEAVY Selects the media weight to be fed from the multi purpose tray.
UNIT OF 
MEASUREMILLIMETRE
INCHSelects the unit of measure.
X-DIMENSION 100-210-216 
MILLIMETRESelects the width of paper defined by the “CUSTOM” settings referred 
to in the foregoing PAPER SIZE settings.
Y-DIMENSION 148-279
297-1220 
MILLIMETRESelects the length of paper defined by the “Custom” settings referred 
to in the foregoing PAPER SIZE settings. Note that media of up to 
1220mm in length can be fed from the multi purpose tray for banner 
printing.
ITEMSETTINGSEXPLANATION
Downloaded From ManualsPrinter.com Manuals 
						

							Menu functions > 24
COLOUR MENU
The printer automatically adjusts colour balance and density at appropriate intervals, 
optimising the printed output for bright white paper viewed in natural daylight conditions. 
The items on this menu provide a means of changing the default settings for special or 
particularly difficult print jobs.
ITEMSETTINGSEXPLANATION
DENSITY 
CONTROLAUTO
MANUALIf set to AUTO, image density will be automatically adjusted at power on, 
when a new image drum or toner cartridge is installed, and at intervals of 
100, 300 and 500 drum counts. If a 500 drum count interval occurs 
during a print job it will occur at the end of that job, and will take up to 
55 seconds. If set to manual, this adjustment will only be performed 
when initiated by the next menu item.
ADJUST 
DENSITYEXECUTESelecting this will activate adjustment of the colour density.
Note: This adjustment must be carried out at idle.
COLOUR 
TUNINGPRINT 
PATTERNSelecting this item prints the colour tuning pattern to help you adjust the 
colour balance.
Note: Normally occurs automatically.
C HIGHLIGHT
C MID-TONE
C DARK
M HIGHLIGHT
M MID-TONE
M DARK
Y HIGHLIGHT
Y MID-TONE
Y DARK
K HIGHLIGHT
K MID-TONE
K DARK-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3Adjusts image density for each colour component (cyan, magenta, yellow 
and black). Normal setting is 0.
C DARKNESS
M DARKNESS
Y DARKNESS
K DARKNESS-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3Adjusts darkness of each colour component (cyan, magenta, yellow and 
black). Normal setting is 0.
AJST 
REGISTRATIONEXECUTE Performs automatic colour registration adjustment. Normally this is done 
on power on and when the top cover is opened and then closed. This 
process accurately aligns the cyan, magenta and yellow images to the 
black image.
Note: This adjustment must be carried out at idle.
C REG FINE 
AJST
M REG FINE 
AJST
Y REG FINE 
AJST-3~0~+3
-3~0~+3
-3~0~+3Performs fine adjustment of image timing in relation to the black image 
component.
INK 
SIMULATIONOFF
SWOP
EUROSCALE
JAPANSelects from a range of industry standard colour swatches.
Note: This function only applies to PS models
UCRLOW
MEDIUM
HIGHSelects limitation of the toner layer thickness.
If paper curl occurs in dark printing, selecting MEDIUM or LIGHT 
sometimes helps reduce curl.
Downloaded From ManualsPrinter.com Manuals 
						

							Menu functions > 25
SYSTEM CONFIGURATION MENU
This menu adjusts general printer settings to suit the way you prefer to work.
CMY 100% 
DENSITYDISABLE
ENABLEWhen enabled, black areas are produced using 100% C, M, and Y instead 
of black. This results in a glossier finish.
CMYK 
CONVERSIONON
OFFSetting to OFF will simplify the conversion process of CMYK data, which 
will reduce the processing time.
This setting is ignored when Ink Simulation function is used.
Note: This function only applies to PS models
ITEMSSETTINGSEXPLANATION
POWER SAVE 
TIME5 MIN
15 MIN
30 MIN
60 MIN
240 MINAdjusts the idling time before the printer automatically switches into 
power saving mode. In this mode power consumption is reduced to a low 
level required to just keep the printer operating and ready to receive data. 
When a job is sent the printer will require a warm-up time of up to 1 
minute before printing can begin.
PERSONALITYAUTO
PCL
IBM PPR III XL
EPSON FX
PS3 
EMULATIONThis item selects which industry standard emulation your printer should 
use. When set to AUTO, incoming data is examined and the correct 
emulation is automatically selected each time a print job is received.
USB PS 
PROTOCOLRAW
ASCIISelects PostScript data format for USB port.
NET PS 
PROTOCOLRAW
ASCIISelects PostScript data format for network port.
CLRABLE 
WARNINGONLINE
JOBWhen ONLINE, non-critical warnings, such as requests for a different 
paper size occur, they can be cleared by pressing the ON LINE button. 
When set to JOB, they are cleared when the print job resumes.
AUTO 
CONTINUEON
OFFDetermines whether or not the printer will automatically recover from a 
memory overflow condition.
MANUAL 
TIMEOUTOFF
30~60~300Specifies how many seconds the printer will wait for paper to be fed 
before cancelling the job.
WAIT 
TIMEOUT5~40~300, 
OFFSpecifies how many seconds the printer will wait when received data 
pauses before forcing a page eject. In PostScript Emulation mode the job 
will be cancelled if timeout occurs.
LOW TONERCONTINUE
STOPSpecifies whether the printer should continue printing even after a low 
toner condition is detected.
JAM 
RECOVERYON
OFFSpecifies whether the printer should perform jam recovery after a paper 
jam has occurred. If ON, the printer will attempt to re-print any pages lost 
due to a paper jam once the jam has been cleared.
ERROR 
REPORTON
OFFIf ON, the printer will print error details when a PostScript Emulation error 
occurs.
Note: Applies to PS & PCL XL only.
ITEMSETTINGSEXPLANATION
Downloaded From ManualsPrinter.com Manuals 
						

							Menu functions > 26
PCL EMULATION
This menu controls settings effective when the printer is operating in PCL emulation mode.
ITEMSSETTINGSEXPLANATION
FONT SOURCERESIDENT / 
RESIDENT2
DOWNLOADE
DSpecifies the location of the PCL default font. Normally this will be 
INTERNAL unless additional fonts are installed in the expansion ROM slot or 
additional fonts have been downloaded to RAM as permanent fonts.
FONT No.I0/ C001 / 
S001Sets the current default font number from the currently selected source, 
which could be internal (I), ROM slot (C) or downloaded (S).
FONT PITCH 0.44CP!~
10.00CPI~
99.99CPISets the width of the PCL default font in characters/inch (CPI).
Default font is the fixed-pitch, scalable font. The value is displayed to the 
second decimal place 
Displayed only when the font selected in Font No. is fixed-spacing, scalable 
font.
SYMBOL SET PC-8
(Default 
Symbol Set 
only shown)PCL symbol set. If the font source and number are changed to one which 
does not support the selected symbol set, this must be changed to an 
available symbol set for that font.
A4 PRINT 
WIDTH78 COLUMN
80 COLUMNS e ts  th e n um b er  o f  co l um ns s ub j e ct t o  Au to  L F  w i th A 4 p a p er  in  PC L .  T hi s i s 
the value when Auto CR/LF Mode is set to OFF with the 10CPI character.
WHITE PAGE 
SKIPOFF / ON Selects whether blank pages are printed or not.
CR FUNCTIONCR / CR+LF Selects whether a received carriage return character (0Dh) also causes a 
line feed.
LF FUNCTIONLF / LF+CR Selects whether a received line feed character (0Ah) also causes a carriage 
return.
PRINT 
MARGINNORMAL
1/5 INCH
1/6 INCHSets the non-printable page area. NORMAL is PCL compatible.
TRUE BLACKOFF / ON Selects whether black image data is printed using black toner (ON) or 
100% CMY (OFF). (Valid in PCL emulation mode only.)
PEN WIDTH 
ADJUSTON/OFF Set to ON when minimum width specified, to stretch a one dot line and 
eliminate gaps.
TRAY ID# MP TRAY
1-2-59
Downloaded From ManualsPrinter.com Manuals 
						

							Menu functions > 27
PPR EMULATION
This menu controls settings effective when the printer is operating in PPR emulation mode.
ITEMSETTINGSEXPLANATION
CHARACTER 
PITCH10 CPI; 
12 CPI; 17 
CPI; 
20 CPI; 
PROPORTION
ALSpecifies character pitch in IBM PPR emulation.
FONT 
CONDENSE12CPI - 
20CPI; 
12CPI - 12CPISpecifies 12CPI pitch for Condense Mode.
CHARACTER 
SETSet 1; Set 2Specifies a character set.
SYMBOL SET IBM 437
(Default Symbol 
Set only shown)Specifies a symbol set.
LETTER 0 
STYLEDisable; 
EnableSpecifies the style that replaces 9BH with letter o and 9DH with a zero
ZERO 
CHARACTERNormal; 
SlashedSets the zero to be slashed or unslashed.
LINE PITCH6 LPI; 8 LPI Specifies the line spacing.
WHITE PAGE 
SKIPOFF / ON Selects whether blank pages are printed or not.
CR FUNCTIONCR / CR+LF Selects whether a received carriage return character (0Dh) also causes a 
line feed.
LF FUNCTIONLF / LF+CR Selects whether a received line feed character (0Ah) also causes a carriage 
return.
LINE LENGTH80 COLUMN; 
136 COLUMNSpecifies the number of characters per line.
FORM LENGTH 11 Inch; 
11.7 Inch
12 InchSpecifies the length of paper.
TOF 
POSITION0.0 INCH - 
1.0 InchSpecifies the distance of print from the top edge of the paper.
LEFT MARGIN0.0 Inch - 
1.0 InchSpecifies the distance of print from the left hand edge of the paper.
FIT TO 
LETTERDisable; 
EnableSets the printing mode that can fit print data, equivalent to 11 inches (66 
lines), in the LETTER-size printable area.
TEXT HEIGHTSame; Diff Sets the height of a character.
SAME: Regardless of CPI, same height
DIFF: As CPI, character heights vary.
Downloaded From ManualsPrinter.com Manuals 
						

							Menu functions > 28
FX EMULATION
This menu controls settings effective when the printer is operating in FX emulation mode.
ITEMSETTINGSEXPLANATION
CHARACTER 
PITCH10 CPI; 
12 CPI; 17 
CPI; 20 CPI; 
PROPORTION
ALSpecifies character pitch in this emulation.
CHARACTER 
SETSet 1; Set 2Specifies a character set.
SYMBOL SETIBM 437 
(Default 
Symbol Set 
only shown)Specifies a symbol set.
LETTER 0 
STYLEDisable; 
EnableSpecifies the style that replaces 9BH with letter o and 9DH with a zero
ZERO 
CHARACTERNormal; 
SlashedSets the zero to be slashed or unslashed.
LINE PITCH6 LPI; 8 LPI Specifies the line spacing.
WHITE PAGE 
SKIPOFF / ON Selects whether blank pages are printed or not.
CR FUNCTIONCR / CR+LF Selects whether a received carriage return character (0Dh) also causes a 
line feed.
LINE LENGTH80 COLUMN; 
136 COLUMNSpecifies the number of characters per line.
FORM LENGTH 11 inch; 
11.7 inch;
12 inchSpecifies the length of paper.
TOF 
POSITION0.0 inch - 
1.0 inchSpecifies the distance of print from the top edge of the paper.
LEFT MARGIN0.0 inch - 
1.0 inchSpecifies the distance of print from the left hand edge of the paper.
FIT TO 
LETTERDisable; 
EnableSets the printing mode that can fit print data, equivalent to 11 inches (66 
lines), in the LETTER-size printable area.
TEXT HEIGHTSame; Diff Sets the height of a character.
SAME: Regardless of CPI, same height.
DIFF: As CPI, character heights vary.
Downloaded From ManualsPrinter.com Manuals 
						

							Menu functions > 29
USB MENU
This menu controls the operation of the printer’s USB data interface. 
NETWORK MENU
This menu controls the operation of the printer’s 10Base-T/100Base-TX network interface.
ITEMSETTINGSEXPLANATION
SOFT RESET ENABLE / DISABLEEnables or disables the SOFT RESET command.
SPEED 12 / 480 Mps Selects the interface speed.
OFFLINE RECEIVE ENABLE / DISABLEOFFLINE RECEIVE.
SERIAL NUMBERENABLE / DISABLE Specifies whether to ENABLE or DISABLE a USB serial 
number.
The USB serial number is used to identify the USB 
device connected to your PC.
NOTE
When you have changed any settings in the USB MENU, turn the printer OFF, 
then ON again.
ITEMSETTINGSEXPLANATION
TCP/IPENABLE / 
DISABLEEnables or disables this network protocol.
IP VERSION
IP V4 /
IPV 4 & V6
IPV 6Sets up the IP version.
Operates with IPv4 only (not valid with IPv6).
Operates with both IPv4 and IPv6.
Operates with IPv6 only (not valid with IPv4).
NETBEUIENABLE / 
DISABLEEnables or disables this network protocol.
IP ADDRESS 
SETAUTO / 
MANUALSpecifies whether IP address allocation is automatic (DHCP) or manually 
assigned.
IP ADDRESS xxx.xxx.xxx.x
xxCurrent assigned IP address. To change, press ENTER and use +/– keys to 
increment 1st octet, then press ENTER again to move on to next octet. 
When 4th octet has been set, press ENTER again to register new address.
SUBNET 
MASKxxx.xxx.xxx.x
xxCurrent assigned subnet mask. To change, proceed as above.
GATEWAY 
ADDRESSxxx.xxx.xxx.x
xxCurrent assigned gateway address. To change, proceed as above.
WEBENABLE / 
DISABLEEnables or disables Web config. facility.
TELNET ENABLE / 
DISABLEEnables or disables Telnet config. facility.
FTP ENABLE / 
DISABLEEnables or disables communication via FTP.
SNMPENABLE / 
DISABLEEnables or disables SNMP protocol.
Downloaded From ManualsPrinter.com Manuals 
						

							Menu functions > 30
MEMORY MENU
This menu sets the conditions of memory allocated to the buffer and resource.
Not displayed as default. This menu is displayed only when set to ENABLE in OP MENU 
of Administrator menu.
NETWORK 
SCALENORMAL / 
SMALLSelects network size.
When NORMAL is selected, printer can work effectively, even when 
connected to a HUB that has a spanning tree
feature. However, printer start up time gets longer when computers are 
connected with two or three small LANs.
When SMALL is selected, computers can cover from two or three small 
LANs to a large LAN, but may not work effectively when connected to a 
HUB that has a spanning tree feature.
HUB LINK 
SETTINGAUTO 
NEGOTIATE
100BASE-TX 
FULL
100BASE-TX 
HALF
10BASE-T 
FULL
10BASE-T 
HALFSets full or half duplex for communication via a network hub.
When AUTO is set, negotiation is done automatically.
FACTO RY 
DEFAULTSEXECUTE Reloads the settings present when the unit was setup by the manufacturer.
ITEMSETTINGSEXPLANATION
RECEIVE BUF 
SIZEAUTO
0.5MB
1MB
2MB
4MB
8MB
16MB
32MBSets the size of the receive buffer
RESOURCE 
SAVEAUTO
OFF
0.5MB
1MB
2MB
4MB
8MB
16MB
32MBSets the size of the resource saving area.
ITEMSETTINGSEXPLANATION
Downloaded From ManualsPrinter.com Manuals