OKI C530dn User Manual

11 – Introduction
Rear View 
* The Network Interface may have a protective “plug” which must be 
removed before connection can be made.
When the rear paper stacker is open, paper exits the printer 
through the rear and is stacked face up. This is mainly used for 
1. ON/OFF switch
2. AC power socket
3. Rear, face up stacker
4. USB interface
5. SD card slot
6. Network interface*
Downloaded From ManualsPrinter.com Manuals 

12 – Introduction
heavy print media. When used in conjunction with the 
multi-purpose feed tray, the paper path through the printer is 
essentially straight. This avoids bending the paper around 
curves in the paper path and enables feeding of media up to 67 
lb. US Bond (250 g/m²).
Changing the Display Language ____
The default language used by your printer for display messages 
and for report printing is English. If required, this can be 
changed using the Panel Downloader Utililty on the CD supplied...

13 – Introduction
Switching off   
1.Press the OK button on the control panel to enter the 
menu.
2.Press the Menu down button and scroll to the Shutdown 
menu.
3.Press the OK button.
4.Press the OK button to continue.
5.Press the OK button to execute.
6.At the prompt, turn the power switch OFF.
CAUTION!
Model C530 only: If you have an SD card fitted, 
always follow the correct shutdown procedure to 
ensure that no data is lost.
Downloaded From ManualsPrinter.com Manuals 

14 – C330/C530 Paper Recommendations
Paper Recommendations
Your printer will handle a variety of print media, including a 
range of paper weights and sizes, labels and envelopes. This 
section provides general advice on choice of media, and 
explains how to use each type.
The best performance will be obtained when using standard 20-
24 lb. US Bond (75-90 g/m²) paper designed for use in copiers 
and laser printers. 
Use of heavily embossed or very rough textured paper is not 
recommended.
Pre-printed...

15 – C330/C530 Paper Recommendations
Tray 1 and Optional Tray 2 ________
Media sizes  
Media Weight Settings 
If you have identical paper stock loaded in another tray (2nd 
tray if you have one, or multi purpose tray) you can set the 
printer to automatically switch to the other tray when the 
current tray runs out of paper. When printing from Windows 
applications, this function is enabled in the driver settings. 
When printing from other systems, this function is enabled in 
the Print Menu. (See page...

16 – C330/C530 Paper Recommendations
Multi Purpose Tray ______________
The multi purpose tray can handle the same sizes as trays 1 and 
2 but in weights up to 58 lb. US Bond (220 
g/m²). For very heavy 
paper stock use the face up (rear) paper stacker. This ensures 
that the paper path through the printer is almost straight.
The multi purpose tray can feed paper widths from 3 inches 
(76 mm) to 8.5 inches (215.9 mm) and lengths from 5 inches 
(127 mm) to 52 inches (1320 mm) (banner printing).
For paper...

17 – C330/C530 Loading Paper
Loading Paper 
Tray 1 and Optional Tray 2 ________
1.Remove the paper tray from the printer.
2.Fan the paper to be loaded at the edges (1) and in the 
middle
 (2) to ensure that all sheets are properly separated, 
then tap the edges of the stack on a flat surface to make it 
flush again
 (3).
12
3
Downloaded From ManualsPrinter.com Manuals 

18 – C330/C530 Loading Paper
3.Adjust the rear stopper (1) and paper guides (2) to the 
size of paper being used.  
Downloaded From ManualsPrinter.com Manuals 

19 – C330/C530 Loading Paper
4.Load paper as shown, keeping the stack below the 
maximum fill line (1).
Note
Letterhead paper should be loaded face down with 
the top edge towards the front of the printer.
Downloaded From ManualsPrinter.com Manuals 

20 – C330/C530 Loading Paper
5.Gently insert the paper tray in the printer.
To prevent paper jams:
• Do not leave space between the paper and the guides 
and rear stopper.
• Do not overfill the paper tray. Capacity depends on the 
type of paper stock.
• Do not load damaged paper.
• Do not load paper of different sizes or types at the same 
time.
• Close the paper tray gently.
Downloaded From ManualsPrinter.com Manuals