Optoma Projector HD50 User Manual

							11
Remote Control
1.Power On
2.DynamicBlack
3.PureEngine
4.Gamma
5.HDMI Link
6.Brightness
7.Contrast
8.Mode
9.Source / ◄
10.Menu
11.HDMI1
12.HDMI2
13.VGA
14.4:3
15.16:9
16.Power Off
17.Color Temp
18.Color
19.Depth
20.3D Format
21.Keystone + / ▲
22.Re-sync / ►
23.Enter
24.Keystone - / ▼
25.YPbPr
26.Video
27.Native
28.LBX




























English  
\034
English   
						

							12
Installation
Connecting the Projector
Connect to Notebook
1.................................DVI/HDMI Cable (Optional Accessory)
2........................................HDMI Cable (Optional Accessory)
3.................................VGA Input Cable (Optional Accessory)
4...........................................................................Power Cord
5.......................................RS232 Cable (Optional Accessory)
NoteNote
Due to the 
difference in 
applications for 
each country, 
some regions may 
have different  
accessories.
E62405SPR
 VGA, DVI, HDMI
4
213
5      
						

							13
Connect to Video Sources
Video Output
DVD player, Set top Bo x
HD TV receive r
DVD player, Set top Bo x
HD TV receiver
E62405SPR
3
76
2
4
3D Adapter
1
5
1....................................3D Sync Cable (Optional Accessory) 
2........................................HDMI Cable (Optional Accessory)
3............SCART RGB/S-Video Adapter (Optional Accessory)
4......RCA Component Cable for YPbPr (Optional Accessory)
5...........................USB Power Charger (Optional Accessory)
6...........................................................................Power Cord
7......................Composite Video Cable (Optional Accessory)
NoteNote
12V OUT is a 
programmable 
trigger.
NoteNote
Due to the 
difference in 
applications for 
each country, 
some regions may 
have different 
accessories.
English  
nstallation
English    
						

							14
Powering On/Off the Projector
Powering On the Projector
1. Connect the power cord to the projector.
2. Turn On the connected devices.
3. Ensure the Power LED is flashing and then press the 
power button to turn On the projector.
The projector’s startup logo screen displays and connected 
devices are detected. If the connected device is a laptop, 
press the appropriate keys on the computer keyboard to 
switch the display output to the projector. (Check the user 
manual of the laptop to determine the appropriate Fn key 
combination to change display output.)
4. If more than one input device is connected, press the 
“Source” button sequentially to switch between devices.  
For direct source selection, see page 19.
NoteNote
Turn on the 
projector first and 
then select the 
signal sources.
NoteNote
Due to the 
difference in 
applications for 
each country, 
some regions may 
have different 
accessories.   
nstallation   
						

							15
Warning Indicator
▀■ When the Lamp LED indicator lights red, the projector will 
automatically shut itself down. Please contact your local 
reseller or service center. See page 54.
▀■ When the Temp LED is on a steady (not flashing) red, the 
projector will automatically shut itself down. Under normal 
conditions, the projector can be switched on again after it 
has cooled down. If the problem persists, you should contact 
your local dealer or our service center. See page 54.
Powering Off the Projector
1. Press the "" button on the remote control or "POWER" 
button on the panel of the projector to turn off the projector. 
First push of button will display the following message on 
the screen.
Press the button again to confirm the shut down. If the 
button is not pressed, the message will disappear in 5 
seconds.
2. The Power LED flashes green (1 sec on, 1sec off) and the 
fans will speed up during shut down cooling cycle. The 
projector reaches stand-by mode as soon as the Power 
LED flashes green (2 sec on, 2 sec off).
If you wish to turn the projector back on, you must wait 
until the projector has completed the cooling cycle and 
has entered standby mode. Once in standby mode, simply 
press "POWER" button on the rear of the projector or "" 
on the remote control to restart the projector.
3. Disconnect the power cord from the electrical outlet and the 
projector only when the projector is in stand-by mode.
NoteNote
Contact the 
nearest service 
center if the 
projector displays 
these symptoms. 
See page 82 for 
more information.
English  
nstallation
English   
						

							16
Adjusting the Projected Image
Adjusting the Projector’s Height
The projector is equipped with tilt-adjuster feet for  
adjusting the image height.
 To adjust the angle of the picture, turn the tilt-adjuster right 
or left until the desired angle has been achieved.
 
Adjusting the vertical image position
The Lens Shift function can be used to adjust the  
position of the vertically.
Down
UP
Lens shift adjustment for 1080P
The display 
position can be 
shifted upward up 
to 9% and down 
to 5% elevation of 
the display.
/HQVVKLIWDGMXVWDEOHUDQJH
6KLIWWRWRS
9
9
9

6KLIWUDQJ H
/HQVVKLIWFHQWHUSRVLWLRQ
6KLIWUDQJH
NoteNote
• The projector 
table or stand 
should be 
level and 
sturdy.
• Position the 
projector 
so that it is 
perpendicular 
to the screen.
• For personal 
safety, please 
secure 
the cables 
properly.   
nstallation   
						

							17
Diagonal 
length (inch) 
size of 16:9 
Screen
Screen Size W X H (16:9)Projection distance (D)Offset (A)(m)(feet)(m)(feet)
WidthHeightWidthHeightwidetelewidetele(m)(feet)
300.66 0.37 2.18 1.23 0.92 1.393.03 4.550.06 0.18 
40 0.89 0.50 2.91 1.63 1.23 1.854.04 6.070.07 0.25 
60 1.33 0.75 4.36 2.45 1.85 2.786.06 9.110.11 0.37 
80 1.77 1.00 5.81 3.27 2.46 3.708.08 12.14 0.15 0.49 
100 2.21 1.25 7.26 4.09 3.08 4.6310.10  15.18 0.19 0.61 
120 2.66 1.49 8.72 4.90 3.69 5.5512.11  18.22 0.22 0.74 
140 3.10 1.74 10.17  5.72 4.31 6.4814.13  21.25 0.26 0.86 
160 3.54 1.99 11.62  6.54 4.92 7.4016.15  24.29 0.30 0.98 
190 4.21 2.37 13.80  7.76 5.85 8.7919.18  28.84 0.35 1.16 
230 5.09 2.86 16.71  9.40 7.08 10.64 23.22 34.91 0.43 1.41 
280 6.20 3.49 20.34  11.44  8.62 12.96 28.27 42.50 0.52 1.72 
300 6.64 3.74 21.79  12.26  9.23 13.88 30.29 45.54 0.56 1.84 
Adjusting Projection Image Size (1080p)
3URMHFWLRQLVWDQFH
.H\VWRQH&RUUHFWLRQ$QJOH
,PDJH+HLJKW
English  
\034
English   
						

							18
User Controls
Remote Control
NoteNote
Due to the 
difference in 
applications for 
each country, 
some regions may 
have different 
accessories.
Using the Remote Control
Power On/Off
Refer to the “Powering Off the Projector” on 
page 15.
Refer to the “Powering On the Projector” on 
page 14.
PureEngine
The PureEngine is a collection of advanced 
image processing technologies that enhances 
the quality of the displayed image.
 Color 
TempRefer to the “Color Temp.” on page 30.
 GammaSet up gamma curve type.
 
DynamicBlack
Enable the projector to automatically optimize 
the display of dark movie scenes enabling 
them to be shown in incredible detail. (refer to 
page 28)
 CMSSelect one of the colors (R/G/B/C/M/Y) to 
adjust its x/y offset and brightness.
 BrightnessAdjust the brightness of the image.
HDMI LinkEnables and disables the HDMI link function.
 DepthAdjust the 3D depth (this function is only 
available when 2D->3D is enabled).
 ContrastControl the degree of difference between the 
lightest and darkest parts of the picture.
 Mode
Select the display mode from Cinema, 
Reference, Vivid, Bright, Game, 3D, User, ISF 
Day and ISF Night.
 3D FormatManually select a 3D mode that matches your 
3D content.
Keystone + 
/ ▲
1. Adjust the image Keystone positively.
2. Navigates and changes settings in the 
OSD.
Source / ◄
1. Press “Source” to search for source.
2. Navigates and changes settings in the 
OSD.     
						

							19
Using the Remote Control
 EnterConfirm your item selection.
Re-sync / ►
1. Automatically synchronizes the projector to 
the input source.
2. Navigates and changes settings in the 
OSD.
Keystone - / 
▼
1. Adjust the image Keystone negatively.
2. Navigates and changes settings in the 
OSD.
 Menu
Press “Menu” to launch the on-screen display 
(OSD) menu. To exit OSD, press “Menu” 
again.
HDMI 1Press “HDMI 1” to choose source from HDMI 1 
connector.
HDMI 2Press “HDMI 2” to choose source from HDMI 2 
connector.
YPbPrPress “YPbPr” to choose YPbPr source.
VGAPress “VGA” to choose source from VGA- IN 
connector.
VideoPress “Video” to choose Composite video 
source.
4:3Scale the image at a 4:3 aspect ratio.
16:9Scale the image at a 16:9 aspect ratio.
LBX
Enable the viewing of the letterboxed 
nonanamorphically enhanced movie at full 
screen width. Part of the original image will 
be lost if the image aspect ratio is less than 
2.35:1.
NativeThe input source will be displayed without 
scaling.
NoteNote
Due to the 
difference in 
applications for 
each country, 
some regions may 
have different 
accessories.
English  
ser ontrols
English   
						

							20
On-screen Display Menus
The Projector has multilingual On-screen Display menus 
that allow you to make image adjustments and change a 
variety of settings. The projector will automatically detect 
the source.
How to operate
1. To open the OSD menu, press “Menu” on the Remote 
Control or Control Panel.
2. When OSD is displayed, use ▲ or ▼ keys to select any 
item in the main menu. While making a selection on a 
particular page, press ◄ or ► or “ENTER” key on the 
Remote Control or “Enter” on the Control Panel to enter 
sub menu.
3. Use ▲ or ▼ keys to select the desired item and adjust the 
settings by ◄ or ► key.
4. Select the next item to be adjusted in the sub menu and 
adjust as described above.
5. Press “ENTER” key on the Remote Control or “Enter” on 
the Control Panel or “Menu” to confirm, and the screen will 
return to the main menu.
6. To exit, press “Menu” again. The OSD menu will close and 
the projector will automatically save the new settings.
Main Menu
SettingSub Menu   
\036