Panasonic 42" Class 1080p Lcd Hdtv Tc L42d30 Owners Manual

							11
Getting started
 Identifying Controls Connections
Identifying Controls
Note
  The TV consumes a small amount of electric energy even when turned off.  Do not place any objects between the TV remote control sensor and remote control.
TV controls/indicators
 Remote control
Switches TV On or Off (Standby)
Viewing from SD card (p. 22-27)
Lights the buttons for 5 seconds 
Press again to turn off the button lights
Select source to watch (p. 21)
Switches to input terminal 
that has “GAME” label (p. 21)
Displays Main Menu (p. 44)
Displays Sub Menu for special 
functions (when available) (p. 18)
 Colored buttons 
(used for various functions)
 Volume up/down
 Sound Mute On/Off
Changes aspect ratio and zoom 
(p. 18, 51)
 Switches to previously viewed 
channel or input
External equipment operations 
(p. 33)Closed caption On/Off (p. 17)
Selects Secondary Audio Programming (p. 17)
 Exits from Menu screen
VIERA Link menu (p. 32-33)
Displays VIERA Connect (includes VIERA 
CAST) Home screen (p. 39)
Displays VIERA TOOLS menu (p. 20)
Selects/OK/Change
Go back to previous menu
Channel up/down, when viewing from ANT/
Cable source
Displays or removes the channel banner (p. 17)
Operates the Favorite channel list function 
(p. 18)
Numeric keypad to select any channel or 
press to enter alphanumeric input in menus
Use for digital channels (p. 17)
C.A.T.S  (Contrast Automatic Tracking System) Power indicator ( on: red, off: no light)
Changes the input mode
Chooses menu and submenu entries Volume up/down Selects channels in sequence
Front of the TV
 POWER button
Menu navigations
Remote control 
sensor within about 
23 feet (7 meters) 
in front of the TV set  
						

							12
 First Time Setup
or
Turn the TV On with the POWER button
or
(Remote)
(TV)
Configure your viewing mode
 Select your  languageLanguage / Idioma / Langue
English Español Français
Step 1 of 7 / Paso 1 de 7 / Étape 1 de 7
OKSelect
Selección Sélection
Select your language
Seleccione su idioma
Sélection de la langue select
 OK
 Select your countryStep 2 of 7
RETURN
OK
Select
Country
Select the country where this TV is being used.U.S.A. Canada Other select
 OK
  Select your viewing mode (Be sure to select “Home use”)Step 3 of 7
RETURN
OK
Select
Set viewing mode
Home use Store DemonstrationSelect your viewing environment select
 OK
 
●Please confirm your selection (Home Use) before pressing OK button.
 
■If you select “ Store Demonstration” by mistake in , 
confirmation screen will be displayed.
No
You are selecting the store demonstration mode.
If you select “Yes”, the picture mode will regularly reset 
to “Vivid” and a Picture Refresh message will be displayed on the 
screen.Ye s select
 OK
 
●Select “No” and return to previous screen . 
●If you select “Yes”, Screen enters the store demonstration mode.
To display the “Set viewing mode” screen again as shown above and 
select “Home Use”, do one of the following:
•  Press and hold down the front POWER button for at least five seconds.•  Unplug power cord for 30 seconds and plug it again.
Note
 
●If you use any other step other than  then turn the TV off, or if you used 
the EXIT button to quit before completing the settings, the next time you turn 
the TV on, “First time setup” will not be automatically displayed. 
•  The settings up to that point are saved.
•  You can start “First time setup”. (p. 49)
 
●Language, ANT/Cable setup, Input labels, and Clock can also be changed 
in the Settings Menu. (p. 49)
The first time setup screen is displayed only when the TV is turned on for the first time after the power cord 
is inserted into a wall outlet and when “Auto power on” (p. 49) \
is set to “No”. 
						

							13
Getting started
 First Time Setup
 
 Press to exit from a menu screen
 
 Press to go back to 
the previous screen
Note
 About broadcasting  systems
 Analog (NTSC):
     Conventional 
broadcasting
 Digital (ATSC):
     New programming 
that allows you 
to view more 
channels featuring 
high-quality video 
and sound
   ANT/Cable setup Do you use a Cable, Satellite or Fiber Optic box with this TV?
ANT/Cable setup
Step 4 of 7
Antenna/Cable in
VIDEO IN
Antenna
Cable In
Which wiring method is used to connect your box to the TV?
HDMI
Component Composite
ReturnOK
Select
 select
 OK
 select
 OK
a  Select signal type 
(Cable/Antenna)
 Select scan type
b  Select connection type 
for Cable or Satellite box 
and go to 
  (Input labels)
ANT/Cable setup
Step 4 of 7
ReturnOK
Select
Ye s NoDo you use a Cable, Satellite or Fiber Optic box with this TV?
No
Ye s
Ye s
ANT/Cable setup
Step 4 of 7
Cable service
(No box)Over-the-Air AntennaHow does the TV receive its programming content?
Antenna
Cable In
ReturnOK
Select
Auto program Step 4 of 7
ReturnOK
Select
Ye s NoStart scanning for available channels in your area?
 Start   scanning
 Complete scanning
Auto program completed.
Press OK to continue.
Number of analog channels
Number of digital channels20 10
OK
RETURN
Auto programProgress
Number of analog channels
Number of digital channels
Press RETURN to quitThis may take some time to complete.
1%
0
RETURN 
						

							14
 
 Press to exit from a menu screen
 
 
■Press to go back to 
the previous screen
Label the inputs for easy identification (Label inputs)To name each input, follow the instructions on screen.
When done, select NEXT and press OK to go to the next step.
Label inputs
Step 5 of 7What is connected to HDMI 1 ?
For your convenience, you may name each input for easy identification.
The labels will be shown in the “Input select” menu. 
HDMIVideo
PC
Next HDMI 1
HDMI 2
HDMI 3
HDMI 4
Component
Customize labelReturnOK
Select
 select
 setor
RETURNOK
Select1 @.4 GHI7 PQRS2ABC5 JKL8 TUV3 DEF6MNO9 WXYZ0 - ,LASTABCabc
GAMEVideo
PC
NextGAME
Follow the instructions on 
screen to complete the 
following operations.
 --> To edit the labels to match your connected devices.
Label:  [BLANK] Blu-ray/CABLE/SATELLITE/DVD/DVD REC/DVR/GAME/HOME  THTR/RECEIVER/COMPUTER/MEDIA CTR/MEDIA EXT/VCR/CAMERA/
MONITOR/AUX/OTHER/Not used
•  Select “Not used” for any back-panel input that has no device conn\
ected to it.  Afterward, the input will be skipped when pressing INPUT, for your convenience. 
•  The input labels can be changed at any time from the TV’s setup menu
Configure   Network settings Select the Network type
Network settings
Step 6 of 7
RETURNOK
Select
Automatic Manual
Checks for proper network connection, settings and 
communication to the Internet and server 
automatically.
 Select the setting mode
Network settings
Connection test Step 6 of 7
Check Ethernet cable connection
Validate IP address
Check for IP address duplication
Check connection to the Internet
Check communication with VIERA Connect server.
Test in progress...
RETURN
Start connection test
Connection test
Manual
Connection 
error
Set later:  Go to 
  
You can set in “Setup” menu later.Wireless (WiFi):  Start “Wireless network” (p. 16)
Automatic:  Press OK to start setup automatically.
   Error screen is displayed when 
Network connection has failed.
Manual:  Go to Manual setting.
 
■Manual setting
 
■Error screen
 Complete “Network settings”Helpful information is displayed when you  
successfully complete “Network settings”.
Network settings
Connection test Step 6 of 7
Check Ethernet cable connection
Validate IP address
Check for IP address duplication
Check connection to the Internet
Check communication with VIERA Connect server.
Connection to local network (router) failed.
Ensure wireless network availability
Retry
Manual Set later
RETURNOK
Select
Manual
Automatic
Retry: Go to “Start connection test”
Set later: Go to 
Network settings Step 6 of 7
Ethernet cableWireless(Wifi) Set later
ReturnOK
Select
Select Ethernet cable of wireless network.
Network settings are complete.
You  can use VIERA Connect.
VIERA Connect lets you enjoy Internet contents 
on your VIERA TV.
Network settings Step 6 of 7
ReturnOK
Network settingsStep 6 of 7
IP setting modeSubnet maskIP addressDefault gatewayDNSDNS setting mode
Connect testProxy addressProxy portAutomatic
255.255.255.0 192.168.0.4
192.168.0.1
192.168.0.1Automatic
00-00-aa-cc-33-ab
RETURNChange Select
Mac address
Configure settings of the network connection. 
						

							15
Getting started
 First Time Setup
 
 Press to exit from a menu screen
 
 
■Press to go back to 
the previous screen
 Adjust the Clock (Set clock) When done, select NEXT and press OK to go to the next step. 
■Manual settingSet clock
Step 7 of 7Adjust the TVs date and time
YearMode
HourMonthMinute- - -
Manual
- - -
-  -  - - - -
- - -DSTTime zoneNext
RETURNEdit
Select
Change
Day
0 -9
 select
 set
Follow the instructions on screen to 
complete the following operations.
RETURN 
OK 0 9  
DSTMinutes10
or
 
■Auto settingSet clock
Step 7 of 7
Ye a rModeMonthHourDayMinuteAutoDSTTime zoneNextEST
Off
RETURNChange Select
Adjust the TVs date and time2011/4/5   6:00 AM
Mode
Manual: Adjust the clock manually (Year/Month/Day/Hour/Minute)
Auto: The clock is adjusted automatically via Internet service. Only 
available when the TV is on a network. -->Set “Network settings” first.
Time zone Select your time zone. (EST/CST/MST/PST/AKST/HST/NST/AST)
DSTSet DST (Daylight Saving Time) setting. (On/Off)On: Advances the clock one hour from the time it is set according to the tim\
e zone.
Complete First time setup 
Congratulations! You are done.
The First time setup can be repeated at any time.
Press MENU and select SETUP; then “First time setup”.
OK
RETURN
Congratulations!   
Setup is complete.
Enjoy your Panasonic VIERA TV.
To watch TV via a Cable box, Satellite receiver, or any other source (DVD, 
DVR, gaming device, etc.), press the INPUT button and select the appropriate 
input. 
						

							16
 
■About  wireless LAN 
●Wireless LAN adapter and Access point need to be obtained separately.
For the latest information on applicable LAN adapters, check the followi\
ng website: 
http://Panasonic.com/NetConnect 
 
●Check that the Access point supports WPS*. 
(If it does not support WPS, the encryption key of the Access point is required when configuring settings.)
 
●Follow the instructions on the Access point setup screen and configure the appropriate security setting\
s.
For more details on setting of Access point, please refer to operating manual for the Access point.
 
●We recommend using 11n (5 GHz) for the wireless system between the wireless LAN adapter an\
d Access point.
Communication is also possible with 11a, 11b, and 11g (2.4 GHz), but the communication speed may be slower.
 
●If the wireless system of the Access point is changed, devices that could connect by wireless LAN may \
no longer be 
able to connect.
 
●When VIERA Connect, Network camera, DLNA, or other device is using the network, do\
 not disconnect the wireless 
LAN adapter.
 
●Keep the TV away from the following devices as much as possible:
Wireless LAN, microwaves, and other devices that use 2.4 GHz and 5 GHz s\
ignals. Otherwise, the TV failures such as 
malfunction may occur due to the radio wave interference.
* WPS: Wi-Fi Protected Setup
 
■Wireless network (First time setup) in  Display “Wireless network” Select the connection method
select
OK
Wireless network
WPS (Wi-Fi Protected Setup using push button)
Please choose connection method:Search for wireless networks
 
●Follow the directions on screen to complete the setting. 
●See page 37 for more information. 
						

							17
Getting started
Basic
 Watching TV First Time Setup
 Watching TV
Turn power on(TV)
or
(Remote)Note
  Please select correct input -->  (p. 21)
 
■VIERA Connect Banner appearsPress OK/INTERNET (or VIERA CAST) button to enter VIERA Connect. (p. 39) 
●To hide the banner   Press any button except OK/INTERNET (or VIERA CAST) 
button (Time-out period of this banner is 5 sec.)
 
●You can also set the banner display status (on/off) in the Setup menu. (p. 49)
Menu > Setup > Advanced setup > VIERA Connect Banner  
 Select a channel number
up
downor
•  Also available side CH button on the unit.
[For Cable/Satellite box connection]
- Use your connected box’s remote control.
 To directly enter the digital channel  number
When tuning to a digital channel, 
press the button to enter the minor 
number in a compound channel 
number.
example:  CH15-1:    
Note
  Reselect “Cable” or “Antenna” in “ANT in” of “ANT/Cable setup” to switch the signal  reception between cable TV and antenna. (p. 13, 42)
 The channel number and volume level remain the same even after the TV is turned off.
 
■Other Useful Functions
Listen with  SAP (Secondary Audio Programming)
 
■Select the Audio mode for watching TV
Digital mode
Press SAP to select next Audio track (if available) when receiving a digital channel.
 
Audio track 1 of 2  (English) 
Analog mode
Press SAP to select the desired Audio mode.
•  Each press of SAP will change the Audio mode. (Stereo/SAP/Mono)
  SAP is not available when watching TV with a Cable or Satellite box connected via HDMI.  Contact your Cable or Satellite operator for instructions on enabling SA\
P with their box.
 Closed Caption
 
■Switches the Closed Caption mode On or Off
 
Closed caption OnClosed caption OffClosed caption On mute
  Closed Caption is not available when watching TV with a Cable or Satellite box connected via HDMI.  Contact your Cable or Satellite operator for instructions on enabling CC\
 with their box.
 Displaying Information
 
■Displays and removes information. When watching programming via the Antenna/Cable input, 
shows the channel banner.
 
15-2 12:30 PM
30THE NEWS 
CC SAP
TV-G 1080i Standard 4:3ABC-HD
Channel
Station 
identifier SAP
indication Signal
resolution
Rating Level Picture
mode
Sleep timer
remaining time
Aspect ratio
Closed caption Clock 
						

							18
Change aspect ratio and Zoom the picture
 
■Press  FORMAT to cycle through the aspect modes  (p. 51)
•  480i, 480p:  FULL/JUST/4:3/ ZOOM
•  1080p, 1080i, 720p:  FULL/H-FILL/JUST/4:3/ZOOM
Use when the picture does not fill the whole screen (bars appears on ei\
ther side of 
the image) or portions of the picture is trimmed.
Note
1.  Some content, such as film-based movies, are available in extra-wide for\
mat. 
Top and bottom bars are unavailable.
2.  Connected devices, such as Cable/Satellite box, DVD/Blu-ray players and \
game  consoles have their own aspect (format) settings. Adjust the device’s aspect 
settings.
Display the  SUB MENU
 
■Press SUB MENU to show the Sub Menu screen This menu consists of shortcuts to convenient functions.
Sub menu is only available when the TV is using the Antenna/Cable input, not when using Cable or Satellite box. 
Specify favorites or type of channels to view when pressing the channel \
up/
down button.
Set favorite channel (below) 
Edit the channel identifier (p. 43) 
Check the signal strength (p. 43)All
Setup SUB MENU
Edit CH caption
Signal meter Set favorite
Channel surf mode
 Call up a favorite channel
 
■ FAVORITEChannel numbers registered in Favorite are displayed on the favorite tun\
e screen. Select the desired broadcast 
station with the cursor or use the number buttons. (p. 17)
Favorite channels1/326-112345
select 
or
 
■Set the Favorite channel
All
Setup SUB MENU
Edit CH caption
Signal meter Set favorite
Channel surf mode
Set favorite
1/326-112345
 select the list 
number 
save the displayed 
channel
select the list number
(to save the channel 
without pressing OK)
or
 
■Delete a favorite channelSet favorite 1/326-112345
 select 
 delete 
(while holding down)
 
■To change the page
Press repeatedly to change between pages (1/3, 2/3, 3/3 or exit)
Changes the page forward/backward
 
●Favorite channels cannot be set when using Cable or Satellite box. 
						

							19
Basic
 Watching TV
 
■Other Useful operations
Entering characters
You can use the remote control keys to enter the alphanumeric characters.\
 
■Switches input mode
 ABC  → abc → 123
  ↑_____________|
 
■Press each number key 
to cycle through the 
alphanumeric character 
RETURN
1 @.4 GHI7 PQRS2ABC5 JKL8 TUV3 DEF6MNO9 WXYZ0 - ,LASTSelect OK
Delete
ABC  → abc
MenuProxy settingProxy address
0
Proxy port1  4  
8
Navigation area
 
●You can also use a USB keyboard (not supplied) to enter the alphanumeri\
c characters. 
●Keyboard type (p. 49)
Password setting/entering
You need to enter the password when you access locked channel or inputs. \
Input your 4-digit password
MenuPassword
Enter password.
*   *   *   -
 
●If it is your first time entering the password, enter the password twice\
 in 
order to register it.
 
●Make a note of your password. Do not forget it. (If you have forgotten \
your password, consult your local dealer.)
 
●When you select a locked channel, a message will be displayed that 
allows you to view the channel after you input your password.
 
●Change password (p. 48)
Operate USB keyboard
You can operate non-character keys as remote control keys.
 
■Key chart
Keyboard key Remote keyKeyboard key Remote key
UP/DOWN/LEFT/RIGHT Cursor key F4Input
Enter OKF5Channel Down(-)
BackSpace Return (when you do not  input character) F6
Channel up(+)
0-9 0-9 F7Volume Down(-)
F1 Menu F8Volume up(+)
F2 VIERA Tools F9(Red)/F10(Green)/
F11(Blue)/F12(Yellow) Color key
(Red/Blue/Yellow/Green)
F3 Submenu
 
●For more details on setting and operation of the USB keyboard, please al\
so read the operating manuals for the USB 
keyboard.
 
●Some keyboards do not have these keys. 
						

							20
Using  VIERA TOOLS
 Press to exit from a menu screen
 
 Press to go back to the previous 
screen 
Display VIERA TOOLS
Select the item
 select
 next
Set each item
   VIERA Connect
Displays VIERA Connect Home Screen for Enjoying 
Internet Services (p. 39)
  Media player
Media player (p. 22-27)
  DLNA
Using DLNA feature (p. 40)
 Game mode
Change to “Game” mode.
Picture mode (p. 45)
  VIERA Link
VIERA Link (p. 32-33)
  Eco mode
ECO/energy saving (p. 49)
VIERA TOOLS is the easy way to access the TV’s special features. They are displayed as shortcut icons on 
the TV screen.