Panasonic 42" Class 1080p Lcd Hdtv Tc L42d30 Owners Manual

							51
Support Information
 Technical Information
 Ratings List for parental control
 Technical Information
 Aspect Ratio (FORMAT)
Press the FORMAT button to cycle through the aspect modes. This lets you choose the aspect depending on the format 
of the received signal and your preference. (p. 18) 
(e.g.:  in case of 4:3 image)
 
●FULL 
●JUST
FULL JUST 
Enlarges the 4:3 image horizontally to the screen’s side edges.
(Recommended for anamorphic picture) Stretches to justify the 4:3 image to the four corners of the 
screen. 
(Recommended for normal TV broadcast)
 
●H-FILL 
●4:3
H-FILL 
Side bar
Enlarges the 4:3 image horizontally to the screen’s side 
edges. The side edges of the image are cut off. Standard
(Note that “Image retention” of the side bar may occur from
displaying it for a long time.)
 
● ZOOM
ZOOM Note
 
●480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9):  
FULL, JUST, 4:3 or ZOOM
 
●1080p / 1080i / 720p:  
FULL, H-FILL, JUST, 4:3 or ZOOM
Enlarges the 4:3 image to the entire screen. 
(Recommended for Letter Box)
 
●Zoom adjustments
Vertical image position and size can be adjusted in “ZOOM”.
 Select “Zoom adjustments” on the “Picture” menu. (p. 45) V-position:  Vertical position adjustment    V-size:  Vertical size adjustment
 
 
●To reset the aspect ratio   (OK)
H size
 
●Aspect Ratio: 4:3
Size 1 Size 2 
●The width will be decreased on both sides to reduce noise.
 
●Aspect Ratio: FULL/JUST(H-FILL/ZOOM)
Size 1 Size 2 
●The width will be increased on both sides to reduce noise.
See page 45 for more information 
						

							52
Data format information
 
●Compatible Data format for Media player (SD card/USB flash memory)/DLN\
A  p. 26
DCF (Design rule for camera file system): A Japan Electronics and Information Technology Industries Association’s standard
EXIF: Exchangeable Image File Format
Note
 
●Format the card with the recording equipment. 
●The picture may not appear correctly on this TV depending on the recording equipment used. 
●Display may take some time when there are many files and folders. 
●The function (VIERA Image Viewer/Media player) cannot display Motion JPEG and still image not DCF \
formatted (i.e. TIFF, BMP). 
●Data modified with a PC may not be displayed. 
●Images imported from a PC must be compatible with EXIF 2.0, 2.1 and 2.2.\
 
●Partly degraded files might be displayed at a reduced resolution. 
●All “.JPG” extension data in the card and USB flash memory will be\
 read in Photo viewer mode. 
●The folder and file names may be different depending on the digital camera used. 
●Do not use two-byte characters or other special codes. 
●The card may become unusable with this TV if file or folder names are changed. 
●For the suitable SD Memory Cards, please confirm the latest information \
on the following website.
  http://panasonic.jp/support/global/cs (This site is in English only)
Cautions when handling  SD Cards
2.1 mm
32 mm
24 mm
 
●Use an SD Card which meets SD standards. If not, it may cause the TV to malfunction. 
●Do not remove the card while the unit is accessing data (this can damag\
e card or unit). 
●Do not touch the terminals on the back of the card. 
●Do not subject the card to high pressure or impact. 
●Insert the card in the correct direction (otherwise, card or unit may b\
e damaged). 
●Electrical interference, static electricity or erroneous operation may d\
amage the data or card. 
●Back up the recorded data at regular intervals in case of deteriorated o\
r damaged data or erratic 
operation of the unit. (Panasonic is not liable for any deterioration o\
r damage of recorded data.)
SD Card/USB flash memory warning messages
MessageMeaning
No media. Please insert an SD memory card or USB 
storage device. 
●The device is not inserted.
No media. Device removed. 
●The device is removed.
No photos/ No movies/No music files to play/ No 
playable media 
●The device has no data or this type of data is not supported.
Cannot read file 
●The file is broken or unreadable. 
●The TV does not support the format. 
						

							53
Support Information
 Technical Information
VIERA LinkTM “HDAVI ControlTM”  
HDMI connections to some Panasonic equipment allow you to interface auto\
matically. (p. 29) 
●This function may not work normally depending on the equipment condition\
. 
●The equipment can be operated by other remote controls with this functio\
n on even if the TV is in Standby mode. 
●Image or sound may not be available for the first few seconds when playb\
ack starts. 
●Image or sound may not be available for the first few seconds when input\
 mode is switched. 
●Volume function will be displayed when adjusting the volume of the equipm\
ent. 
●If you connect equipment that has “HDAVI Control 2 or later” function to the TV with an HDMI cable, the sound from the 
DIGITAL AUDIO OUT terminal can be output as multi-channel surround.
 
●“HDAVI Control 5” is the newest standard (current as of December, 2010) for the HDAVI Control compatible equipment.
This standard is compatible with the conventional HDAVI equipment.
 HDMI connection
HDMI (high-definition multimedia interface) allows you to enjoy high-d\
efinition digital images and high-quality sound by connecting 
the TV unit and HD devices.
HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, su\
ch as a Cable or Satellite box or a DVD player, can be 
connected to the HDMI connector using an HDMI compliant (fully wired) \
cable.
 
●HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard. 
●If the external equipment has only a DVI output, connect to the HDMI ter\
minal via a DVI to HDMI adapter cable (*2). 
●When the DVI to HDMI adapter cable is used, connect the audio cable to t\
he audio input terminal. 
●Audio settings can be made on the “HDMI 1 in”, “HDMI 2 in”, \
“HDMI 3 in” or “HDMI 4 in” menu screen. (p. 47)
Applicable audio signal sampling frequencies (L.PCM):  48 kHz, 44.1 kH\
z, 32 kHz
  (*1):  The HDMI logo is displayed on an HDMI-compliant device. 
  (*2):  Enquire at your local digital equipment retailer shop.
Caution
 
●Use with a PC is not assumed. 
●All signals are reformatted before being displayed on the screen. 
●If the connected device has an aspect adjustment function, set the aspec\
t ratio to “16:9”. 
●These HDMI connectors are “type A”. 
●These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection. 
●A device having no digital output terminal may be connected to the input \
terminal of either “COMPONENT”, or “VIDEO” to 
receive analog signals.
 
●The HDMI input terminal can be used with only the following image signal\
s:  480i, 480p, 720p, 1080i and 1080p.
Match the output setting of the digital device.
 
●For details of the applicable HDMI signals, see p. 54.
DIGITAL AUDIO OUT terminal
You can enjoy your Home theater by connecting a Dolby Digital (5.1 chann\
el) decoder and “Multi Channel” amplifier to the 
DIGITAL AUDIO OUT terminals. 
Caution
 
●Depending on your DVD player and DVD-Audio software the copyright protec\
tion function may operate and disable optical 
output.
 
●When an ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When an NTSC 
channel is selected, the output will be PCM.
 
●When playing a movie on SD Card Movie player, when the sound has been recorded in Dolby Digital, the output from the\
 
DIGITAL AUDIO OUT terminal will be Dolby Digital. When the sound is recorded in other for\
mats, the output will be PCM.
 Closed Caption (CC)
 
●For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM or 4:3; 
characters might be cut off).  
 
●The CC can be displayed on the TV only when the receiver (such as a Cable box or satellite receiver) \
has the CC set
to ON within the device itself. Check with your Cable or Satellite provi\
der for instructions. The TV’s CC button does
not operate the Satellite or Cable box’s CC function.
 
●If the CC is set to On on both the receiver and TV when the signal is 480i (except for the HDMI connection), the CC 
may overlap on the TV.
 
●If a digital program is being output in analog format, the CC data will \
also be output in analog format.  
●If the recorder or output monitor is connected to the TV, the CC needs to be set up on the recorder or output monitor. 
						

							54
PC Input Terminals
 
●Signal Names for D-sub 15P Connector
1 
678 
3 9 
45 10  15 14 13 12 11 2 
Pin No.Signal NamePin No.Signal NamePin No.Signal NameRGND (Ground)NC (not connected)GGND (Ground)NCBGND (Ground)HD/SYNCNC (not connected)NC (not connected)VDGND (Ground)GND (Ground)NCPin Layout for PC Input Terminal
Input signal that can be displayed
* Mark: Applicable input signal for Component (Y, PB, PR), HDMI and PC
horizontal frequency (kHz) vertical frequency (Hz) COMPONENT HDMI PC
525 (480) / 60i 15.7359.94
**
525 (480) /60p 31.4759.94**
750 (720) /60p 45.0059.94**
1,125 (1,080) /60i 33.7559.94**
1,125 (1,080)/60p 67.4359.94*
1,125 (1,080)/60p 67.5060.00*
1,125(1,080)/24p 26.9723.98*
1,125(1,080)/24p 27.0024.00*
640 × 400 @70 31.4770.08*
640 × 480 @60 31.4759.94*
Macintosh13” (640 × 480) 35.0066.67*
640 × 480 @75 37.5075.00*
852 × 480 @60 31.4459.89*
800 × 600 @60  37.8860.32*
800 × 600 @75  46.8875.00*
800 × 600 @85 53.6785.08*
Macintosh16” (832 × 624) 49.7374.55*
1,024 × 768 @60 48.3660.00*
1,024 × 768 @70 56.4870.07*
1,024 × 768 @75 60.0275.03*
1,024 × 768 @85 68.6885.00*
Macintosh 21” (1,152 × 870) 68.6875.06*
1,280 × 768 @60 47.7859.87*
1,280 × 1,024 @60  63.9860.02*
1,366 × 768 @60  48.3960.04*
Note
 
●Signals other than above may not be displayed properly. 
●The above signals are reformatted for optimal viewing on your display. 
●Computer signals which can be input are those with a horizontal scanning\
 frequency of 15 to 110 kHz and vertical scanning 
frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 l\
ines.)
Panasonic does not guarantee operation and performance of peripheral dev\
ices made by other manufacturers; and we 
disclaim any liability or damage arising from operation and/or performan\
ce from usage of such other maker’s peripheral 
devices. 
						

							55
Support Information
 Care and Cleaning
 Technical Information
 Care and Cleaning
First, unplug the Power cord plug from the wall outlet.
Display panel
The front of the display panel has been specially treated. Wipe the pane\
l surface gently using only a cleaning cloth or a soft, lint-
free cloth.
  If the surface is particularly dirty, soak a soft, lint-free cloth in diluted mild liquid dish soap (1 part\
 mild liquid dish soap diluted by 100 times the amount of water) and then wring the cloth to remove ex\
cess liquid. Use this cloth to wipe the surface of the 
display panel, then wipe it evenly with a dry cloth of the same type unt\
il the surface is dry.
  Do not scratch or hit the surface of the panel with fingernails or other\
 hard objects. Furthermore, avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the \
quality of the surface may be adversely affected.
Cabinet
If the cabinet becomes dirty, wipe it with a soft, dry cloth.  If the cabinet is particularly dirty, soak the cloth in a weak mild liquid dish soap and then wring the clot\
h dry. Use this cloth to wipe the cabinet and then wipe it dry with a dry cloth.
  Do not allow any mild liquid dish soap to come into direct contact with \
the surface of the LCD TV. If water droplets get inside the unit, operating problems may result.
  Avoid contact with volatile substances such as insect sprays, solvents, a\
nd thinner; otherwise, the quality of the cabinet surface may be adversely affected or the coating may peel off. 
  Do not let articles made from rubber or PVC be in contact with the TV for long periods of time.
Pedestal
 CleaningWipe the surfaces with a soft, dry cloth. If the unit is particularly di\
rty, clean it using a cloth soaked with water to which a small 
amount of mild liquid dish soap has been added and then wipe with a dry \
cloth.
Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surface coating.\
 
(If using a chemically-treated cloth, follow the instructions supplied \
with the cloth.)
  Do not attach sticky tape or labels, as they can make the surface of the\
 pedestal dirty. Do not allow long-term contact with rubber, vinyl products, or the like. (Doing so will cause deterioration.)
Power cord plug
Wipe the plug with a dry cloth at regular intervals. (Moisture and dust\
 can lead to fire or electrical shock.) 
						

							56
QuestionsAnswers
Picture
 Frequently Asked Questions (FAQ)
If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry \
out the 
suggested check. If this does not solve the problem, visit the Panasonic\
 website for further assistance. (see cover)
How do I view the picture from 
devices such as a: Cable/
Satellite box,  game console, 
Blu-ray or DVD player?  Press the INPUT button on the remote to select the correct 
input source.
  Check that the device is turned on and functioning correctly.
Why is there no picture or just 
a blue, black or snowy screen 
being displayed?
 Check if the power cord is plugged in and the TV is turned 
on (front red LED light should be on; not blinking)
 Press the INPUT button on the remote to select the correct input source. Ensure all connections are correct and secure.  When using external video source, such as a Cable/Satellite box or 
DVD player, check that the device is on and functioning correctly.
  Press MENU on the TV’s remote control. If the menu is displayed, then the TV is working; recheck above steps.
Why doesn’t the picture look 
like it is in High Definition?
 Press the INFO button on the remote to confirm the type of signal 
being received (p. 17). HD signal should be 720P, 1080i or 1080p.
  Select a High Definition channel from your HD source (Cable, Satellite or fiber optic service). HD channels 
sometimes broadcast non-HD content.
  Ensure that your HD source (HD box, Blu-ray player, etc.) is connected to the TV with an HDMI or Component cable 
and set to output an HD video signal.
Why do black bars appear on 
the top and bottom and/or sides 
of the screen?
  Change the format (aspect ratio) of the picture by pressing the FORMAT button on the remote control. (p.18)
  Check the aspect settings on your external video source, such as Cable/Satellite box, DVD/Blu-ray Disc player, etc.
 
Note:  Some content, such as film-based movies, are available in  extra-wide format. Top and bottom bars are unavoidable.
Why is the picture snowy when 
“ANT/Cable in” is selected?
  When using a cable service (without a box), check that all connections are secure.
  When using a cable or satellite box, change the connection (wiring) to Composite, Component or HDMI. (p.10)
  If you’re using an antenna, then check that connections are secure. Change the position or direction of the antenna and 
check the “Signal meter”. (p.43)
Why is the picture chaotic and/
or torn and/or with a buzz in the 
speakers?  Check if electrical products such as kitchen appliances, fluorescent lights or light dimmers are nearby. They may 
interfere with the TV’s picture.
 Try viewing a picture from another device, such as a DVD player 
or a game console, to narrow down the source of the problem.
Why is there a black box on the 
screen?  Change settings of Closed Caption (CC). (p. 17, 53)
Why is the screen blank and the 
power indicator blinking? The TV has gone into shutdown mode to protect itself. Try unplugging 
it for a few minutes and connecting it again. If there was a temporary 
power surge on the AC line it may now be OK. If the  blinking returns, 
call 1-877-95VIERA (U.S.A.) or 1-866-330-0014 (Canada).
Why do some small spots on 
the screen remain bright or 
dark?  The LCD panel is made up of a few million pixels and is produced with advanced technology through an intricate 
process. Sometimes a few pixels may be bright or dark. 
These pixels do not indicate a defective panel and will have 
no impact on the performance of the TV. 
						

							57
Support Information
 Frequently Asked Questions
QuestionsAnswers
Sound Other
Why is there no sound coming 
from the TV?
 Make sure the volume is up and MUTE is off.  Confirm the TV speakers are set to ON by pressing MENU 
and selecting “Audio” --> “Advanced audio”. (p.47)
 Check that the correct SAP (Secondary Audio Program) is selected 
by pressing the SAP button on the remote control. (p.17)
 If the TV is connected to a Panasonic Home Theater via HDMI 
cable, then check VIERA Link controls. (p.33)
 If the TV is connected to a Home Theater via optical cable, 
then: Check the connection,  the audio system is on, the 
correct input is selected.
 Check “HDMI 1 in”, “HDMI 2 in”, “HDMI 3 in” or “HDM\
I 4 in” 
analog/digital audio settings. (p. 47)
Why is the sound unusual, 
distorted, low volume or in 
another language?
 Check that the correct SAP (Secondary Audio Program) is 
selected by pressing the SAP button on the remote control.
  Check that all connections of external equipment 
connected to the TV are secure. 
 When using Cable or Satellite box, check the device’s audio 
settings.  (example: try changing the box’s  Audio Range to ‘narrow’)
Why is there a clicking, ticking 
or buzzing sound coming from 
the TV unit? When TV power is turned on or shut off there are electrical 
components that make a click sound. This is normal operation.
 Changes in the temperature and humidity of the room may 
cause thermal expansion and contraction that can produce 
sounds. This is not a sign of faulty operation or a malfunction.
What is the easiest and best 
way to connect a High-Definition 
Cable or Satellite box to the TV?  Use an HDMI cable. It carries both digital video and audio signal in HD. HDMI cable is the only cable needed to 
connect an HD device to the TV.
Why does the CC button not 
display Closed Caption?  When viewing TV via an HDMI connected device, such as a Cable or Satellite box, CC must be enabled at the device. 
 Closed Caption is available only at supported TV programming.
Why does the screen and back 
cover of the TV get warm?
  The main unit radiates heat and some of the parts may become hot. This is normal operation and does not affect 
the performance of the set.
  Ensure good ventilation.  Do not block the ventilation holes of the TV and do not place the TV on top of other equipment.
Why doesn’t the Remote 
Control work?
  Check that the batteries are fresh, are of the same type and are installed with the correct polarity (+ & -).
  To operate other devices, such as changing channels when using Cable or Satellite boxes or operating non-Panasonic 
Blu-ray players, use the remote supplied with the device.
Why is the “ANT/Cable” option 
at the top of the “Input select” 
menu gray-out and cannot be 
selected?  During “First time setup”, you indicated in step - that 
you are using Cable or Satellite box and in step -b that 
the box is connected to one of the TV’s AV inputs. In this 
case, the Antenna/Cable input is deactivated to prevent 
unintentional switching into unused tuner. To re-activate, 
press MENU, select SETUP and repeat “First time setup”.
Some menu items are grayed-
out and cannot be selected. 
Why? Depending on certain modes or the selected input, some 
options are not available. For example, Zoom adjustments are 
only available when the FORMAT is changed to zoom mode. 
						

							58
QuestionsAnswers
Networking 
How do I get VIERA Connect to 
work on my TV?
1.  You need a broadband (high speed) Internet service with a 
speed of no less than 1.5 Mbps (p. 35).
2. 
Connect the TV to the Internet through your router by an 
Ethernet cable or a compatible Panasonic USB wireless adapter.
3.  Run the “Connections Test”, under the Network Settings menu. If Connection test fails, then check with your Internet service 
provider or router/modem manufacturer if there are firewall, 
content filter or proxy settings that may block the TV from 
accessing the Internet.
How do I check for the latest 
software (firmware) version for 
my TV?
  In the main menu, select “Setup”. Highlight “Network Settings”\
 and press OK. Select “Software Update”. The current version 
and latest version software will be shown. If software update 
is “grayed out”, the TV is not connected to the Internet. If 
newer version is available, update your TV. Follow the on-
screen instructions, do not power off the TV until the update is 
complete. Be patient; firmware update may take a while.
Can I use any USB WiFi adapter to 
connect the TV to my wireless network?  The TV’s internal software was designed to work with Panasonic’s wireless adapter model DY-WL10*. 
Check www. panasonic.com/NetConnect for updated 
information.
How do I reset my TV to all factory 
defaults and settings?  In the main menu, select “Setup”. Highlight “Reset to Defaults”\
 and press OK. Enter your password (if created earlier) or 
create a temporary new password. Select Yes to reset the TV.
Can I download new apps 
(content & services) into my 
VIERA Connect TV?  Yes. Select the “VIERA Connect Market” item in the middle bottom of the VIERA Connect home screen. “VIERA Connect 
Market” allows you to find and install the applications to 
“VIERA Connect” home screen. (p. 39)
* Model number is subject to change without notice. 
						

							59
Support Information
 Specifications
 Frequently Asked Questions
 Specifications
TC-L42D30
Power Source AC 1
 10-127 V, 60 Hz
Power 
ConsumptionRated Power 
Consumption 108 W
Standby condition 0.2 W
Display
panelAspect Ratio 16:9
Visible screen size
(W × H × Diagonal)
(No. of pixels) 42” class (42.0 inches measured diagonally)
36.6 ” × 20.6 ” × 42.0 ” (930 mm × 523 mm × 1,067 \
mm)
2,073,600 (1,920 (W) × 1,080(H))      [5,760 × 1,080 dots]SoundSpeaker
1-way 2 bottom SP System
Audio Output 20 W [10 W + 10 W] (10 % THD)
PC signals VGA, SVGA, XGA, WXGA, SXGA 
Horizontal scanning frequency 31 - 69 kHz
Vertical scanning frequency 59 - 86 Hz
Channel Capability-
ATSC/NTSC (Digital/Analog) VHF/ UHF:  2 - 69, CATV:  1 - 135
Operating Conditions Temperature:  32 °F – 95 °F (0 °C – 35°C)
Humidity:  20 % – 80 % RH (non-condensing)
Connection Terminals
VIDEO IN
VIDEO:    RCA PIN Type × 1 1.0 V[p-p] (75 Ω
)
AUDIO L - R:  RCA PIN Type × 2 0.5 V [rms]
 COMPONENT IN Y:    1.0 V [p-p] (including synchronization)
P
B, PR:    ±0.35 V [p-p]
AUDIO L-R:  RCA PIN Type × 2 0.5 V [rms]
 HDMI 1-4 TYPE A Connector × 4
• This TV supports “HDAVI Control 5” function.
 USB 1-3 USB 2.0 Type A connector x 3 (DC5V MAX500mA)
LAN (for VIERA Connect)RJ45 (10BASE-T/100BASE-TX)
PC D-SUB 15PIN:  R,G,B / 0.7 V [p-p] (75 
Ω)
    HD, VD / 1.0 - 5.0 V [p-p] (high impedance)
Card slot SD CARD slot × 1
DIGITAL AUDIO OUT PCM / Dolby Digital, Fiber Optic
FEATURES 3D Y/C FILTER  CLOSED CAPTION
V-Chip VIERA connect
VIERA IMAGE VIEWER  Media player  HDAVI Control 5
Dimensions
(W × H × D)
Including TV stand 38.9 ” x 25.0 ” x 11.4 ” (986 mm x 633 mm x 288 mm)
TV Set only 38.9 ” x 23.6 ” x 1.3 ” (2.9 ”) (986 mm x 598 mm x 33 mm \
(72 mm))
MassIncluding TV stand
41.9 lb. (19.0 ) NET
TV Set only 35.3 lb. (16.0 
) NET
Note
  Design and Specifications are subject to change without notice. Mass and\
 Dimensions shown are approximate.
[TC-L42D30]1.3 ” 
(33 mm)38.9 ” (986 mm)
23.6 ” (598 mm)
25.0 ” (633 mm)
11.4 ” (288 mm) 2.9 ”  
(
72 mm)15.8 ”
(400 mm) 
						

							60
This product incorporates the following software or technology:
(1) the software developed independently by or for Panasonic Corporati\
on,
(2) the software owned by third party and licensed to Panasonic Corpor\
ation,
(3) the software developed by the Independent JPEG Group,
(4) the software developed by the FreeType Project,
(5) the software licensed under the GNU LESSER General Public License \
(LGPL) and/or,
(6) open sourced software other than the software licensed under the L\
GPL.
(7) Windows Media digital right management technology (WM-DRM) licen\
sed by Microsoft Corporation or its affiliates.
For the software categorized as (5), please refer to the terms and con\
ditions of LGPL, as the case may be at 
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
In addition, the software categorized as (5) are copyrighted by severa\
l individuals. 
Please refer to the copyright notice of those individuals at
http://www.am-linux.jp/dl/DTV11U/
The LGPL software is distributed in the hope that it will be useful, but WITHOUT\
 ANY WARRANTY, 
without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
At least three (3) years from delivery of products, Panasonic will giv\
e to any third parry who contact us at the contact information 
provided below, for a charge no more than our cost of physically performing source cod\
e distribution, a complete machine-
readable copy of the corresponding source code covered under LGPL.
Contact Information
   [email protected]
Source code covered under LGPL is also freely available to you and any other member of the public via \
our website below.
http://www.am-linux.jp/dl/DTV11U/
For the software categorized as (5) and (6), please refer to the app\
licable license terms included in the “Setup” menu on product.
Further, for WM-DRM categorized as (7), please be aware of the following.
(a) This product is protected by certain intellectual property rights of Mic\
rosoft.
Use or distribution of this technology outside of this product is prohib\
ited without a license from Microsoft or an authorized 
Microsoft subsidiary.
(b) Content providers are using the digital rights management technolo\
gy for Windows Media contained in this device 
(“WM-DRM”) to protect the integrity of their content (“Secur\
e Content”) so that their intellectual property, including
copyright, in such content is not misappropriated.  This device uses WM-DRM software to play Secure Content 
(“WM-DRM Software”).  If the security of the WM-DRM Software in \
this device has been compromised, owners of Secure Content 
(“Secure Content Owners”) may request that Microsoft revoke the \
WM-DRM Software’s right to acquire new licenses to copy, 
display and/or play Secure Content.
Revocation does not alter the WM-DRM Software’s ability to play unprotected content.  A list of revoked WM-DRM Software 
is sent to your device whenever you download a license for Secure Conten\
t from the Internet or from a PC.  Microsoft may, in 
conjunction with such license, also download revocation lists onto your \
device on behalf of Secure Content Owners.