Panasonic 65” Class 1080p Plasma HDTV TH-65PZ750U Operating Instructions

							11
Quick Start 
Guide
 Basic  Connection
(TV + DVD Recorder or VCR)
High-Definition
Standard-Definition
2 1AV  I N
AUDIO VIDEO
YY
LL
RR P
BPB
PRPR
COMPONENT VIDEOINPUT
12
L
RY
P
B
PR
S VIDEO
PROG 
L
RL
R
TO AU
NPUT
1INPUT
2
R L
INPUT
2
L
RL
R PRL
R
IDEO
2INPUT
1
L
R
Note
■To use HDMI terminals
■To use COMPONENT terminals
• Recorders may also be connected to COMPOSITE or S VIDEO terminals. (see below)e.g. DVD Recorder
e.g. DVD Recorder
HDMI
AV OUT
COMPONENT
VIDEO OUT
AUDIO
OUTwhite
red green
blue
red
white
red green
blue
white
redwhite
redAUDIO
OUT S VIDEO
OUT red
■ To use COMPOSITE terminals
■To use S VIDEO terminals
COMPOSITE
OUT
yellow
white
redyellow
white
red
• The S Video input will override the composite 
video signal when S Video cable is connected. 
Connect either S Video or Video cable.• Connecting to S VIDEO terminals will enable 
you to enjoy greater picture quality than using 
Composite terminals.
white
red green
blue
red
white
red yellow
white
red
• Connecting to HDMI terminals will enable you to enjoy high-definition digital images and high-quality 
sound.
or e.g. DVD Recorder AV Equipment
AV Equipment
AV Equipment
e.g. VCR
or e.g. DVD Recorder AV Equipment
e.g. VCR
•Some programs contain a copyright protection signal to prevent recording.
• When the copyright protection program is displayed, do not connect the other TV monitor through a VCR. Video signals fed 
through VCRs may be affected by copyright protection systems and the picture will be distorted on the other TV monitor.
• For the details of the external equipment’s connections, please refer to the operating manuals for the equipment. 
						

							12
To connect antenna terminals
Connecting TV and DVD recorder (VCR)
ANT INANT OUTANT IN
COMPONENT VIDEOINPUTINPUT
12
1INPUT
2
AUDIO VIDEOAUDIO VIDEO
S VIDEO
PROG OUT
Y
L
RL
L R
RL
R P
B
PR
HDMI 1AUDIO IN
HDMI 2AUDIO IN
TO AUDIO AMP
DIGITALAUDIO
OUT
AUDIO
INAUDIO
IN
PC
2 1AV IN
ANTENNACable In
Y
L
R P
B
PRL
R
Example 3
Basic Connection (Continued)
DVD Recorder
or 
VCRSatellite 
Receiver TVVHF/UHF Antenna
Connecting DVD recorder (VCR) and satellite receiver
Connect in the same way as on p. 11.Satellite Receiver DVD Recorder or VCR
(with TV tuner)
VHF/UHF Antenna
Back of the TVAC Cord
AC 120 V
60 Hz
To use HDMI 
terminals
(p. 11)
To use COMPONENT terminals
(p. 11)To use COMPOSITE terminals
(p. 11)To use S VIDEO terminals
(p. 11)
Antenna 
terminal 
						

							13
Quick Start 
Guide
 Basic  Connection
(TV + DVD Recorder or VCR + Satellite Receiver)
To Connect DVD Recorder/
VCR and satellite receiver
L
R
L
R
L
R
L
R
white
redwhite
redAUDIO
OUT S VIDEO
OUT
■To use COMPOSITE terminals
■To use S VIDEO terminals
Satellite ReceiverCOMPOSITE
OUT
DVD Recorderyellow
white
redyellow
white
red
Satellite Receiver
• The S Video input will override the composite video signal when S Video cable is connected. Connect 
either S Video or Video cable.
• Connecting to S VIDEO terminals will enable you to enjoy greater picture quality than using Composite 
terminals.
white
red yellow
white
redwhite
red yellow
white
red
S VIDEO
IN
AUDIO
IN
COMPOSITEIN
VCR
DVD Recorder
VCRor
or
Note
• For the details of the external equipment’s connections, please refer to the operating manuals for the equipment. 
						

							14
To connect HDMI terminals
VIDEO
DIGITALAUDIO
OUT
AUDIO
INAUDIO
IN
2 1AV IN
Basic Connection (Continued)
Example 4Connecting Home Theater and DVD recorder
Home Theater
DVD Recorder TV
DIGITAL
AUDIO IN
DVD RecorderHome Theater
(AV amp)
HDMI
AV OUTHDMI
AV IN
HDMI
AV OUT
• It is recommended that you use Panasonic’s HDMI cable. (P. 34)
• When Using the COMPONENT VIDEO OUT terminals or the S VIDEO OUT 
terminal, refer to p. 11 “To use COMPONENT terminals” or “To use S VIDEO 
terminals”.
• If you connect RAM theater or Player theater with HDMI cable, use audio cable 
instead of the optical digital audio cable. (p. 45)
Note
or
Home theater (HDMI AV  OUT)Home theater (DIGITAL AUDIO  IN)
(When listening to TV audio)  [ATSC only]
Back of the TV 
						

							15
Quick Start 
Guide
 Identifying  Controls Basic Connection (TV + Home Theater + DVD Recorder)
-
SUBSUBMENUMENU
-
AV IN
3
Identifying Controls
• The TV consumes a limited amount of power as long as the power cord is inserted into the wall outlet.
Note
Switches TV to On or Standby
Viewing from SD Card (p. 22-25)
The equipment selection button (p. 26)
Changes the input mode (p. 26)
Displays Sub Menu (p. 19, 32)
Colored buttons 
(used for various functions)
(for example p. 22, 24, 38)
Channel up/down
Changes aspect ratio (p. 19)
Operates the Favorite channel list 
function. (p. 20)
Switches to previously viewed channel 
and input modes.
SPLIT
Split Screen (p. 20)
SWAP
Swap pictures in SPLIT operation (p. 20)EZ Sync menu (p. 27, 34-35)
Selects Audio Mode for TV viewing 
(p. 19)
Displays Main Menu (p. 30)
Exits menus
Selects/OK/Change
Returns to previous menu
Volume up/down
Displays or removes the channel 
banner (p. 19)
Sound mute On/Off
Numeric keypad to select any 
channel (p. 18) or press to enter 
alphanumeric input in menus.
(p. 26, 27, 36, 38, 43)
Direct channel access for DTV and 
DBS (p. 18)
External equipment operations
(VCRs, DVDs, etc.) (p. 26) POWER 
buttonSwing up the door at “PULL”.
Remote control sensorVolume up/down
(Move cursor right or left during menu mode.)Video Input 3 connector
Power indicator (on: red, off: no light)C.A.T.S. sensor
Plasma C.A.T.S. 
(Contrast Automatic Tracking System). (p. 30)Display the Main menu.
Choose menu and submenu entry.
Selects channels in sequence
(Move cursor up or down during menu mode.) SD CARD slotSwitches TV/VIDEOHDMI input 3 connector 
						

							16
First time setup
Language
Auto program
Picture Clock
Language
EnglishLanguage
First time setup
Auto program
Picture
Language
Clock
Clock
2007Ye a r
Month
7
1
Day
Hour
10
10 AM
Minute
or
First Time Setup
“First time setup” is displayed only when the TV is turned on for the first time after the power cord is 
inserted into a wall outlet and when “Auto power on” (p. 32-33) is set to “No”.
Turn the TV On with the POWER button
1
Select your language
2
Adjust the clock
3
Year:  Select the year
Month:  Select the month 
Day:  Select the day
Hour:  Adjust the hour 
Minute:  Adjust the minuteGo back to previous screen.
■ Press to exit from 
menu screen
■ Press to return to 
previous screen 
Note
• To change setting 
(Language/Clock/Auto 
program/Picture) later, 
go to Menu screen 
(p. 30, 32)
English  Español   Français
next
select
 set
 select  item
Go back to previous screen.
or
 next
 select (TV) (Remote) 
						

							17
Quick Start 
Guide
 First Time  Setup
Program channel
CableANT in
Auto
Auto program
progress Scanning digital channel
Quit40%
Caption Favorite Add
ApplyCancelprogram
... .
Ye s
... .
Ye s
... .
Ye s
First time setup
Picture
Language
Clock
Auto program
Program channel
CableANT in
Auto
Auto program
All channels
Analog only
Digital only
First time setup
Picture
Language
Clock
Auto program
 next
 select 
 select 
“Apply”
 ok
 next
 select
 set
 select
ANT in
Cable:  Cable TV
Antenna:  Antenna
Auto channel setup
4
 Select  “Auto”
 Select “Auto program”
 Select “ANT in”
5 Confirm registered channels
• Available channels (analog/digital)
are automatically set.
• If OK is not pressed after selecting “Apply”, the channels will not be saved.
• If you perform scanning more than twice, previously saved channels are erased.
Note
• About broadcasting 
systems
  Analog (NTSC):  
traditional TV 
programming
 Digital (ATSC): 
new programming 
that allows you to 
view more channels 
featuring high-quality 
video and sound
■ Press to exit from 
menu screen
 ok
 select
All channels:  Scans digital and analog channels
Analog only:  Scans Analog channels only
Digital only:  Scans Digital channels only
Start scanning the channels
 Select scanning mode (ALL channels/Analog only/Digital only)
(Refer to p. 30) 
						

							18
SUBSUBMENUMENU
-
Watching TV
Connect the TV to a cable box/cable, set-top-box, satellite box, or antenna cable (p. 8-13)
up
down
or
■ To directly input the digital channel number
example:  CH15-1:   - 
Note
• Reselect “Cable” or “Antenna” in “ANT in” of “Program channel” to switch the 
signal reception between cable TV and antenna. (p. 17, 39)
• The channel number and volume level remain the same even after the TV is 
turned off. 
-When tuning to a digital channel, press the button to enter the 
minor number in a compound channel number. Note
• If the mode is not TV, press  and select TV. (p. 26)
Turn power on
1
2
Select a channel number 
						

							19
Viewing
 Watching TV15-2 12:30 pm
30THE NEWS 
CC SAP
TV-G 1080iStandard 4:3ABC-HD
Setup SUB MENU
AllSurf mode
Set favorite
OffCC
Caption select
Signal meter
SUBSUBMENUMENU
■ Other Useful Functions (Operate after )
Display the 
SUB MENU Listen
with SAP
(Secondary 
Audio 
Program)
■ Selects Audio Mode for watching TV
• Digital mode
  Press SAP to select the next audio track (if available) when receiving a digital channel.
 
Audio track 1 of 2 
(English) 
• Analog mode
  Press SAP to select the desired audio mode.
• Each press of SAP will change the audio mode. (Stereo/SAP/Mono)
■ Press SUB MENU to show sub menu screen. (p. 32)
This menu consists of shortcuts to convenient functions.
Change
aspect
ratio
■ Press ASPECT to cycle through the aspect modes. (p. 52)
•  480i, 480p:  FULL/JUST/4:3/ZOOM
•  1080p, 1080i, 720p:  FULL/H-FILL/JUST/4:3/ZOOM
Information
Recall
■ Displays or removes the channel banner.
Channel
Station 
identifierSAP
indicationSignal
resolution
Rating LevelPicture
modeSleep timer
remaining time
Aspect ratio Closed captionClock 
						

							20
2Video1
2Video1
P Out P
2Video1
2 Video1
2Video1
2Video1
Video1Normal
Call up
a favorite
channel■ FAVORITE
  Channel numbers registered in Favorite are displayed on the favorite tune 
screen. Select the desired broadcast station with the cursor or use number 
buttons. (see p. 21)
Watching TV (Continued)
Watch in multi window 
(Audio is from Main picture only)
 •   The Split-screen feature is not available when using PC and SD Card viewing mode as a 
source.
Split - 
Screen
• Left window (Main picture)
Screen enlargement and volume adjustment are available.
• Right window (SPLIT frame)
The previously selected screen appears.
TV channel or Video input signal can be changed on SPLIT 
frame.
 HDMI input cannot be displayed in SPLIT frame.
■ Other Useful Functions (Operate after  in p. 18)
P Out P:
Picture out of picture modeNormal:
Picture and picture mode