Panasonic 65” Class 1080p Plasma HDTV TH-65PZ750U Operating Instructions

							21
Viewing
 Watching TV
Favorite channels1/3
1
2
3
4
26-1      - - -
Set favorite 1/3
1
2
3
---
---
---
---
4
Setup SUB MENU
AllSurf mode
Set favorite
OffCC
Caption select
Signal meter
Setup SUB MENUAllSurf mode
Set favorite
OffCC
Caption select
Signal meter
Set favorite 1/3
1
2
3
4
26-1      - - -
SUBSUBMENUMENU
1 Press FAVORITE.
 •  Press FAVORITE repeatedly 
to change between pages (1/3, 
2/3, 3/3, or exit). 
2 Press ▲▼ or a Numbered key 
(1-9 and 0) to highlight a channel 
on the list.
•  Selecting a channel number 
from the list with the number 
button will display the channel 
directly.
3  Press OK to display the 
highlighted channel.
Use Favorite Feature
select 
ok 
• To change the page Pressing ◄ changes the page backward.    Pressing ► changes the page forward.
1 Display the SUB MENU.
2 
 •  Press FAVORITE repeatedly 
to change between pages (1/3, 
2/3, 3/3, or exit). 
3 Press ▲▼to highlight a position 
on the list. 
Then, press OK to save the 
displayed channel in that position.
 •  You can also use the NUMBER 
buttons (1-9 and 0) to select a 
list number (1-9 and 0). By doing 
so, the displayed channel will 
be saved on that list number 
without pressing OK.
• To delete a favorite channel  A saved channel can be removed from the list by holding 
down OK while its position is highlighted.
Set Favorite Feature
 select 
 ok
 select  “Set favorite”
 ok 
						

							22
Memory card
Thumbnails
Movie player
Slide show
Photo viewer
Viewing from SD Card
You can view movies and photos taken with a digital camera or digital video camera and saved on an SD card.
(Media other than SD Cards may not be reproduced properly.)
Select “Movie player”
3
2Select the SD modo
 or
■ Press to return to TV 
■ Press to exit from 
menu screen 
■ Press to return to 
the previous screen
 
1Insert the SD Card
• For cautions and details on SD Cards (p. 53)
Display menu
 Select “Memory card”
SD
Card
• Remove the card• Insert the card
• Compliant card type (maximum capacity): SDHC Card (4 GB), SD Card (2 GB), miniSD Card 
(1 GB) (requiring miniSD Card adapter)
•Blue LED lights while SD Card is inserted if set “SD card LED” to “On” in Setup Menu (p. 32).
• Open the cover
Blue LEDPress in lightly on SD 
Card, then release.Label surface
Push until a click is heard
 select
 ok
Movie player
• No video signals can be output from PROG OUT terminal when playing the 
movie.
Note
This product is licensed under the AVC patent portfolio license for the personal 
and non-commercial use of a consumer to (i) encode video in compliance 
with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was 
encoded by a consumer engaged in a personal and non-commercial activity 
and/or was obtained from a video provider licensed to provide AVC Video. No 
license is granted or shall be implied for any other use. Additional information 
may be obtained from MPEG LA, LLC. See http://www.mpegla.com. 
						

							23
Viewing
 Viewing from SD Card
MPEG menu
Picture
Audio
OK Select
RETURN
Picture    1/2
Normal
Picture mode
Picture
Brightness
Cl
Set
Vivid
0
0
Skip SkipRYGB
Search
StopRETURNPlay
Date & Time
Duration06/10/2007 11:34
00h05m27sPLAY
00:00.14
Pause
Movie Viewer
No. Date and Time Duration
12/20/2006
01/17/2007
03/07/2007
04/24/2007
06/10/2007
08/19/2007
10/02/2007
10/13/2007
12/01/200710:26
14:25
07:25
09:25
11:34
10:25
12:25
14:25
16:2500h16m35s
01h45m35s
00h05m35s
01h10m35s
00h05m27s
00h35m35s
00h12m35s
00h53m35s
01h24m35s 1
2
3
4
5
6
7
8
9
Select OK
RETURN
Date and Time
Duration06/10/2007 11:34
00h05m27sPLAY
00:00.14
Skip SkipRYGB
Pause
Search
StopRETURN
Play
Audio
Normal
Bass
Treble
Blance
O
Set
0 0
0
stereo
■ To adjust picture and audio
Picture and Audio menu (p. 30)
In  or  5  When MENU is pressed, the “MPEG menu” is displayed.
 select
 ok
Select the movie to be listed
4
• To display/hide banner   
View
5Navigation area
 select
 okMovie information
Date and Time:
Date and time of recording are 
displayed.
Duration: 
Recording time is displayed. Recording format (MPEG2/AVCHD)
Elapsed time of current movie
Movie Banner
•To display Navigation area        
•To hide Navigation area  
•To Previous movie  
•To next movie  
■ To confirm or change the current audio status
In 
5  When SAP is pressed, the current audio status is displayed.
Each press of SAP will change the audio mode. ( if the movie has multiple audio signals.)
•It may take several seconds to change the sound.
(Current audio status) 
						

							24
GalleryPlayer images are available for a fee from GalleryPlayer, Inc.
Slide showRYGB
OK Select
Accessing
RETURN
No. 
101-0365
Date
 01/01/2007
Pixel 
1600x1200
Photo viewerTotal 
Information12
101-0365101-0366 101-0367 101-0368
101-0369 101-0370 101-0371 101-0372
101-0373 101-0374 101-0375 101-0376
Accessing
Slide showRYGB
NextPrev.
Rotate
RETURN
Accessing
SingleRYGB
Pause
Next
Prev.
RETURN
Memory card
Thumbnails
Movie player
Slide show
Photo viewer
Select the photo to be viewed
   (Only when “Thumbnails” is selected)
3
2Select the menu
■ Press to return to TV
■ Press to exit from 
menu screen
■ Press to return 
to the previous 
screen
1
Follow direction  -  in Movie player (p. 22)
 select
 view
Thumbnail view
Selected picture information is displayed.
No.:  Image number or file name is 
displayed.
Date:  Date of recording is displayed.
Pixel:  Display resolution is displayed.
Total number of imagesNavigation area
(to Slide show) Present status
(While reading the data)
Note
• Depending on the JPEG format, “Information” contents may not be displayed 
correctly. Refer to p. 53 (Data format for SD card browsing) for details.
(to Single photo display)
 select
 ok
Photo viewer
Viewing from SD Card (Continued)
■ When “Slide show” or “Photo viewer” is selected,  is skipped 
and photos are displayed directly. 
  go to  
						

							25
Viewing
 Viewing from SD Card
Viewing from a GalleryPlayer SD Card
Slide showRYGB
Next Rotate
Prev.RETURN
JPEG setup
Disp. time
Repeat
5
On
JPEG menu
Picture
JPEG setup
OK Select
RETURN
Picture    1/2
Normal
Picture mode
Picture
Brightness
Color
Set
Vivid
0
0
0
Tint0
Sharpness0
JPEG menu
Picture
JPEG setup
OK Select
RETURN
Rotate 90 degrees (counter-clockwise)
To next photo
Rotate 90 degrees (clockwise)
To previous photo
View
4
Displays one at a time
Navigation area
In  or 
To change the view (Slide show mode, adjusting images, etc.)
■ To watch photos in Slide show mode 
Disp. timeYou can set how many seconds each image is displayed in Slide show mode.
(1-10/15/20/30/45/60/120 sec)
Repeat
Turn the slide show Repeat function On or Off.
Note
• For large image sizes, the display time will be longer than the number of seconds set.
• To stop in mid-cycle  Press 
You can view high-definition art and photography purchased on or downloaded to an SD card. 
GalleryPlayer provides pre-loaded SD cards with copy-protected imagery and images for download 
to your computer that can be saved on an SD card for display on your television.
■ To adjust picture 
Picture menu (p. 30)
In  or 
When MENU is pressed, the “JPEG menu” is displayed.
 select
 “Picture”
 ok
• To display/hide Navigation area   
 select
 “JPEG 
setup”
 ok 
						

							26
VCR MODE DVD MODE
VCR Record Record
-Skip Reverse/Forward
Rewind/Fast Forward Reverse/Forward
Stop Stop
Pause Pause
Play Play
Input select
1
2
3
4
5
7
6TV
Component 1
Component 2
HDMI 1
HDMI 2
HDMI 3
Video 1
Video 2
8Video 2
9Video 3
0PC
Video 1
VCR
With the connected equipment turned On
Display the Input select menu
Press corresponding NUMBER 
button on the remote control to 
select the input of your choice.
Select the input of your choice, 
then press OK.
• During the selection, if no action 
is taken for several seconds, the 
“Input select” menu disappears.
• The terminal and label of 
the connected equipment is 
indicated.
  To label each of the inputs please 
refer to p. 40-41.
(example)
or
Operate the connected equipment, pointing remote control 
at the equipment.
• For details, see the
manual of the 
equipment.
Select the input mode
(example)
(For other operations, see p. 46)
Terminal
(example)Label
■ To return to TV        
Note
4
1
2
 select
 enter
Watching Videos and DVDs
If you have some equipment connected to the TV, you can easily watch videos and DVDs using the TV’s 
remote control.
Input Select
You can select the external equipment to access. 
To operate other manufacturers’ equipment, you need to register the code of the equipment. (p. 43)
3
Select the remote control mode
Press the key to select 
						

							27
Viewing
 Watching Videos and DVDs
EZ SyncTM
DVD recorder
Home theater
HD camcorder
Speaker output
TV
Display EZ Sync menu
Operate
You can operate the selected equipment with the TV’s remote 
control.
Follow the menu of the equipment and enjoy watching. 
For the remote control operations, refer to p. 34.
Select the equipment
3
1
2
 select
 enter
If you connect equipment that has “HDAVI Control 2” function to a TV with HDMI cable, you can 
enjoy using more convenient functions. For details, refer to “EZ Sync Control” on p. 34-35.
• For details, see the manual for the equipment or ask your local dealer.
Note
■ To return to TV         
						

							28
PC
Input select
1
2
3
4
5
7
6TV
Component 1
Component 2
HDMI 1
HDMI 2
HDMI 3
Video 1
Video 2
8Video 2
9Video 3
0PC
■ To return to TV      
Displaying PC Screen on TV
The screen of the PC connected to the unit can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC (p. 44)
Displays
PC screen
Display the Input select menu
1
2
Select “PC”
• Corresponding signals 
(p. 55) 
						

							29
Viewing
 Displaying PC Screen on TV
■ PC menu setting (changed as desired)
• Making settings  “How to Use Menu Functions”  to  (p. 30) 
Menu Item Adjustments/Configurations (options)
Picture
PC
adjust
Normal Resets PC adjust (Set/No)
Sync
•H & V: The H and V sync signals are input from the HD/VD connector. (p. 55)
•On G:  Uses a synchronized signal on the Video G signal, which is input from the G 
connector. (p. 55)
Dot clock Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is 
blurred.
H-positionAdjust the horizontal position.
  
V-positionAdjust the vertical position.  
Clock phaseAlleviates the problem if the whole picture appears to flicker or is blurred.
First adjust the Dot Clock to get the best possible picture, then adjust the
Clock Phase so that a clear picture appears.
 It may not be possible to display a clear picture due to poor input signals.
Input
resolutionSwitches to wide display.
•Input signal switched from VGA to WVGA
•Input signal switched from XGA to WXGA
H-frequency
V-frequencyDisplays the H (Horizontal)/V (Vertical) frequencies.
•Display range
Horizontal: 15 - 110 kHz
Vertical: 48 - 120 Hz
• Audio menu (p. 30)
• For PC input, only audio signals can be output from PROG OUT terminals.
Note 
						

							30
Menu ItemEZ Sync
DVD recorder, 
Home theater, 
HD camcorder, 
Speaker output
Picture
Normal 
Picture mode
Picture, Brightness,
Color, Tint, Sharpness
Color temp.
Color mgmt.
C.A.T. S.
Pro setting
Zoom adjust
PC adjust
Other adjust
Video NR
3D Y/C filter 
Color matrix
Block NR
Mosquito NR
Black level
3:2 pulldown
HD Size
Audio
Normal
Bass
Treble
Balance
Other adjust
AI sound
BBE VIVA 3D
BBE
Surround
Speaker output
HDMI 1 in
HDMI 2 in
HDMI 3 in
Audio leveler
TimerSleep, Timer 1-5
Lock
Memory
CardMemory card
Picture    1/2
Normal
Picture mode
Picture
Brightness
Color
Set
Vivid
0
0
0
Tint0
Sharpness0
Menu
Audio
Lock
Setup Memory card Timer Picture EZ Sync
Picture    1/2
Normal
Picture mode
Picture
Brightness
Color
Set
Vivid
0
0
0
Tint0
Sharpness0
• Displays the functions that can be set 
(varies according to the input signal)
 select
 next
select
adjust
or 
select
(example:  Picture menu)
■ Press to exit from 
menu screen
■ Press to return 
to the previous 
screen
 
Select the menu
Select the item
3
2
Adjust or select
4
1
Display menu
(example:  Picture menu)
Various menus allow you to make settings for the picture, sound, and 
other functions so that you can enjoy watching TV in the way best 
suited for you.■ Menu list
How to Use Menu Functions