Home > Panasonic > Car Satellite Radio System > Panasonic Aac Wma Mp3 Cd Player Receiver Cq C500u Operating Instructions

Panasonic Aac Wma Mp3 Cd Player Receiver Cq C500u Operating Instructions

Here you can view all the pages of manual Panasonic Aac Wma Mp3 Cd Player Receiver Cq C500u Operating Instructions . The Panasonic manuals for Car Satellite Radio System are available online for free. You can easily download all the documents as PDF.

Page 11

CQ-C500U11
English

Preparation, General
General
This chapter explains how to turn on or off the power, how to adjust the volume, etc.
Power On
Press	[PWR]	(Power).
Power Off
Hold	down	[PWR]	(Power)	for	1	sec. 	or	
more. 	
You can remove the face plate to 
prevent it from being stolen.
Removing
1 Turn	off	the	power. 	( above)
2 Press	[OPEN].	 The	face	plate	will	be	
opened. 	
3 Push	the	face	plate	to	the	
left.	
4 Pull	it	out	toward	you. 	
5	Put	the	face	plate	in	
the	case.
 Cautions
•  This face plate...

Page 12

CQ-C500U12

Source Selection
(SOURCE)
The source changes as follows every time [SOURCE] 
is pressed. 
AUX1 (AUX1 in) (3.5 mm  stereo) 
From line output of external sound/audio device (ex. 
Silicon-audio player, HDD player, etc.)
General
Volume Off (down)
Press	[MUTE].
Cancel
Press	[MUTE] 	again.	
Note: You can select mute or attenuation. ( page 23)
 Up
 Down
Setting Range: 0 to 40
Default: 18 
Note: The volume level can be set independently for 
each source. (For radio, one volume setting for AM,...

Page 13

CQ-C500U13
English

General, Sound Control
SQ Selection Based on Genre 
SQ (Sound Quality) 
Sound Control
You have 6 preset modes (FLAT, ROCK, POP, VOCAL, 
JAZZ, CLUB). You can customize your settings for these 
and save them for instant recall.
SQ Changeover 
 
Press [SQ] to activate the SQ selection mode. 
  
Press [SQ] to select the sound type as follows. 
Press [DISP] to return to the regular mode. 
Notes: 
•  After pressing 
[SQ] on the main unit, you can also 
select a sound type by pressing the...

Page 14

CQ-C500U14

1	Press	[SOURCE]	to	select	the	radio	
mode. 	
2	Press	[BAND] 	to	select	a	band. 	
3	Select	a	station.
Frequency Adjustment
[] (TUNE): Higher
[] (TUNE): Lower
Note: Hold down for 0.5 sec. or more and release 
for station search.
Preset Station Selection
	 Press	the	numeric	button	[1]	to	[6].	
Radio
This chapter explains how to listen to the radio.
Band
Preset NumberFrequencyLights while receiving an 
FM stereo signal.
Operation Flow
Radio Mode Display
Display Change 
(DISP: Display)
Press...

Page 15

CQ-C500U15
English

Radio
Radio
Up to 6 stations can be preset in AM, FM1, FM2, and FM3 
respectively. 
Auto Preset Memory (APM)
Stations with good receiving conditions automatically 
preset.
1	Select	a	band.
2	Hold	down	[BAND] (APM)	for	2	sec.	or	
more.
The preset stations under best receiving conditions 
are received for 5 sec. each after presetting the 
stations (SCAN). To stop scanning, press the 
numeric button [1] to [6]. 
Note: New stations overwrite existing saved stations. 
Manual Station...

Page 16

CQ-C500U16

 Cautions
•	This	unit	does	not	support	8	cm	{3"}	discs.	
•	Do	not	insert	a	disc	when	
	indicator	lights	
because	a	disc	is	already	loaded. 	
•	Do not use irregularly shaped discs. ( page 28)
•	Do not use discs that have a seal or label attached.
•  To avoid damaging the face plate, do not push it down or 
place objects on it while it is open.
•  Do not pinch your finger or hand in the face plate.
•  Do not insert foreign matter into the disc slots.
•	Refer to the section on “Notes on...

Page 17

CQ-C500U17
English

Random Play
All the available tracks are played in a random sequence. 
Press [4]	(RANDOM).  lights. 
Press again to cancel. 
Scan Play 
The first 10 seconds of each track is played in sequence. 
Press [5]	(SCAN).
Press again to cancel. 
Repeat Play 
The current track is repeated. 
Press [6]	(REPEAT).  lights. 
Press again to cancel. Random, Scan, Repeat Play
(RANDOM, SCAN, REPEAT)
Functions Only by Remote 
Control Unit
Direct Access
A track can be directly selected.
Example: track...

Page 18

CQ-C500U18

MP3/WMA/AAC Player
4 Select a desired portion.
Folder Selection
[] (FOLDER): Next folder
[] (FOLDER): Preceding folder
File Selection
[] (TRACK): Next file
[] (TRACK): Preceding file (press twice)
Note: Hold down for fast forward/reverse.
Pause
Press [].
Press again to cancel.
Operation Flow
MP3/WMA/AAC Mode DisplayFolder numberFile number
Play	Mode	indicators
Lights when each mode is activated.
Random play
Repeat play
Folder Random, Folder 
Repeat, Folder Scan
Lights when the disc is...

Page 19

CQ-C500U19
English

Direct Access
A file in the current folder can be directly selected.
Example: file number 10
1 Press [#] (NUMBER).
2 Press  [1]	[0].
3 Press [SET].
Random, Scan, Repeat Play
(RANDOM, SCAN, REPEAT)
Functions Only by Remote Control Unit
MP3/WMA/AAC Player
Notes:
• To have another circle scroll while a text is displayed, 
press  [3]	(SCROLL). If the number of displayed 
characters is 8 or less, the characters do not scroll. 
•  “NO TEXT” is displayed when there is no information 
on the...

Page 20

CQ-C500U20

MP3/WMA/AAC Player
What is MP3/WMA/AAC?
MP3* (MPEG Audio Layer-3) and WMA (Windows MediaTM 
Audio) are the compression formats of digital audio. 
The former is developed by MPEG (Motion Picture 
Experts Group), and the latter is developed by Microsoft 
Corporation. Using these compression formats, you 
can record the contents of about 10 music CDs on a 
single CD media (This figures refer to data recorded on 
a 650 MB CD-R or CD-RW at a fixed bit rate of 128 kbps 
and a sampling frequency of...
Start reading Panasonic Aac Wma Mp3 Cd Player Receiver Cq C500u Operating Instructions

Related Manuals for Panasonic Aac Wma Mp3 Cd Player Receiver Cq C500u Operating Instructions

All Panasonic manuals