Panasonic Active Speaker System Sc-cmax5 Owners Manual

until 
2015/08/15
PP
Thank you for purchasing this product.
Please read these instructions carefully before using this product, 
and save this manual for future use.
If you have any questions, visit:
U.S.A.: http://shop.panasonic.com/support
Canada: www.panasonic.ca/english/support
Register online at http://shop.panasonic.com/support
 (U.S. customers only)
Owner’s Manual
Active Speaker System
Model No. SC-CMAX5
RQT0A53-Y
SC-CMAX5_PP~RQT0A53-Y_ENG.book  1 ページ  ２０１５年６月１２日　金曜日　午前１０時２３分 

2
RQT0A53 (ENG)
IMPORTANT SAFETY 
INSTRUCTIONS
Read these operating instructions carefully before using the 
unit. Follow the safety instructions on the unit and the 
applicable safety instructions listed below. Keep these 
operating instructions handy for future reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in 
accordance...

3
(ENG) RQT0A53
Table of contents
IMPORTANT SAFETY INSTRUCTIONS............ 2
Accessories....................................................... 3
Audio sources ...................................................3
Licenses ............................................................ 3
Unit care ............................................................ 4
About Bluetooth
®.............................................. 4
Moving this unit ................................................5
Control reference...

4
RQT0A53 (ENG)
Unit care
≥When you play music at high levels for a long 
period, it can cause damage to the speakers and 
decrease the life of the speakers.
≥Decrease the volume in these conditions to 
prevent damage:
– When the sound is distorted.
– When you adjust the sound quality.
Pull out the AC power supply cord from the outlet 
before maintenance.
≥When dirt is heavy, wring a wet cloth tightly to 
wipe the dirt, and then wipe it with a dry cloth.
≥Never use alcohol, paint thinner or benzine to...

5
(ENG) RQT0A53
Moving this unit
You can move this unit with ease by its wheels.
Preparation
≥Be sure to remove all connected devices and cables from this unit.
	
≥Take care when pulling on steep slope.
≥Avoid pulling over surfaces which are rough or uneven.
≥Do not pull over stairs.
≥Lift the unit when transporting over obstacles.
≥Always push the trolley handle down fully after transportation.
≥This speaker system does not have magnetic shielding. Do not place it near a TV, PC or other magnetic...

6
RQT0A53 (ENG)
Control reference guide
∫Using the remote control
Insert the battery so the terminals (i and j) match 
those in the remote control.
Point it at the remote control signal sensor on this 
unit.
≥To avoid interference, please do not put any objects in front of 
signal sensor.
Remote controlRear view
Top view
(Alkaline or 
manganese battery)
SC-CMAX5_PP~RQT0A53-Y_ENG.book  6 ページ  ２０１５年６月１２日　金曜日　午前１０時２３分 

7
(ENG) RQT0A53
1Standby/on switch [Í], [Í/I]
Press to switch the unit from on to standby 
mode or vice versa. In standby mode, the unit 
is still consuming a small amount of power.
2 Select audio source
On the unit:
To start Bluetooth
® pairing, press and hold 
[ -PAIRING] when you are in Bluetooth® 
source.
3 Basic playback control buttons
4 Enter setup menu
5 Change the displayed information
6 Selection/OK
7 Set the sleep timer
8 Dim the display panel and turn off the 
illumination
Press again to...

8
RQT0A53 (ENG)
Connecting a USB device
Preparation
≥Before you connect a USB device to the unit, 
make sure you do a backup of the data.
1Decrease the volume and connect the USB 
device to the USB port.
2Press [USB] to select “USB A” or “USB B”.
The corresponding USB status indicator lights 
green when selected.
	≥Insert the USB device directly. Do not use any USB 
extension cable.
≥Please disconnect the USB device if you finish using.
≥Stop the USB operation before disconnecting the USB 
device....

9
(ENG) RQT0A53
You can change the transmission mode to prioritize 
transmission quality or sound quality.
Preparation
≥Press [ ] to select “BLUETOOTH”.
≥If a Bluetooth
® device is already connected, 
disconnect it.
1Press [PLAY MENU] repeatedly to select 
“LINK MODE”.
2Press [3,4] to select the mode and then 
press [OK].
MODE 1: Emphasis on connectivity
MODE 2: Emphasis on sound quality
	≥Select “MODE 1” if the sound is interrupted.
≥The factory default is “MODE 2”.
1While a Bluetooth® device is...

10
RQT0A53 (ENG)
You can use DJ jukebox to add cross-fading effect 
between songs. You can also use additional 
features with the “Panasonic MAX Juke” app 
(lbelow).
1Press [PLAY MENU] repeatedly to select 
“JUKEBOX”.
2Press [3,4] to select the setting and then 
press [OK].
Using the unit
Press [DJ JUKEBOX] repeatedly to select the 
setting.
∫DJ jukebox playback mode
When the DJ jukebox is on, the playback mode 
switches to repeat mode automatically.
To select your desired repeat settings
1Press [PLAY...