Panasonic Administrator Console Wj Nd300 Operating Instructions

Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Administrator Console
Operating Instructions 
Model No.WJ-ND300 

2
Contents
Limitation of Liability  ........................................................................................................3
Disclaimer of Warranty  .................................................................................................... 3
Features .......................................................................................................................... 4
About Copyright and License...

3
Limitation of Liability
THIS PUBLICATION IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS.
CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS
PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).
Disclaimer of...

4
Features
The WJ-ND300 Administrator Console is the exclusive setup tool for the Network Disk Recorder WJ-ND300.
By using this software, it is possible to perform the settings of the network disk recorder using a PC via a network.
It is also possible to download the setting values and save it as a setup file, and upload the edited setup file to the
network disk recorder.
This software is applicable for version 2.0 or later of the WJ-ND300.
About Copyright and License
This software can be distributed and...

5
Preparations
It is necessary to complete the connections between a PC and the network disk recorder and perform the network
settings of the PC and the network disk recorder respectively.
Connections
There are 2 methods to connect a PC and the network disk recorder:
•Connecting a PC and the network disk recorder directly
•Connecting a PC to the network disk recorder via a hub or a router
When connecting a PC to the network disk recorder, the required hardware and cables are different depending on
the...

6
Installing This Software
Notes:
•If Microsoft .NET Framework 1.1 is not installed on a
PC, it will be installed automatically when installing
this software.
It is possible to check with Control Panel whether
Microsoft .NET Framework 1.1 is installed on a PC
or not.
Open the Change or Remove Programs window by
selecting Add or Remove Programs in Control
Panel.
The installed applications will be displayed in list
form.
Check if Microsoft .NET Framework 1.1 is on the
list or not.
•When re-installing this...

7
Uninstalling This Software
If required, uninstall this software as follows.
Step 1
Open Add or Remove Programs in Control Panel.
The Add or Remove Programs window will be displayed.
Step 2
Select WJ-ND300 Administrator Console and click the Remove button.
Step 3
Follow the uninstall wizard. 

8
Start the Software
Screenshot 1
Start just after the PC is started up.
Step 1
Select WJ-ND300 Administrator Console from the
Start menu (Start - All Programs - Panasonic -
WJ-ND300 Administrator Console) or double click the
shortcut icon of WJ-ND300 Administrator Console on
the desktop.
The software will start up.
Important:
Log in to the PC as an administrator before starting
the software.
Start the software as follows.
Screenshot 2
The login window will be displayed.
Step 2
Enter the password.
The...

9
Screenshot 4
The top page of the operation window will be displayed.
Step 6
Perform the settings for each item.
Step 7
Click the [SET] button after completing the settings.
Step 8
Close the window by clicking the  button at the top
right of the window to exit the software.
Note:
It is possible to check version of the setup menu by displaying the Product Information page of Maintenance
on the setup menu (Advanced) using a web browser.
Refer to the Setup Instructions (PDF) of the network disk recorder. 

Tool bar
[Upload]: The setup file created/edited using this
software will be uploaded to the network disk
recorder by clicking this button. (page 16)
[Download]: The setting values will be down-
loaded from the network disk recorder by clicking
this button. (page 14)
[Open]: Click this button to open the saved
setup file. (page 19)
[New]: Click this button to create a new setup
file. (page 21)
[Save As]:Click this button to save the creat-
ed/edited setup file. (page 20)
[Version conversion]:Click this...