Panasonic Administrator Console Wj Nd300 Operating Instructions

21
Create a Setup File Newly
Screenshot 1
Operate using the buttons on the tool bar on the opera-
tion window.
Step 1
Click the [New] button on the tool bar.
Screenshot 2
The version selection window will be displayed.
Step 2
Select the version of the WJ-ND300 currently in use.
Step 3
Click the [OK] button.
A new setup file will be created and the top page of the
operation window will be displayed. Create a setup file newly as follows. The default setting values will be applied for a newly created setup...

Convert the Version of the Setup File Format
Screenshot 1
Operate using the buttons on the tool bar on the opera-
tion window.
Step 1
Click the [Version conversion] button on the tool bar. It is possible to convert the version of the setup file format.
Version conversion is available only when the version of the WJ-ND300 in use is 2.xx.
Screenshot 2
The version conversion window will be displayed.
Step 2
Select Upgrade.
Step 3
Click the [OK] button.
Screenshot 3
The confirmation window will be...

23
Change the Password
Screenshot 1
Operate using the buttons on the tool bar on the opera-
tion window.
Step 1
Click the [Password] button on the tool bar. Change the login password as follows.
Screenshot 2
The Change Password window will be displayed.
Step 2
Enter the current password in the Old Password (O)
box.
Step 3
Enter the desired password to be used as a new pass-
word in the New Password (N) box.
Enter up to 8 alphanumeric characters.
Step 4
Enter the new password in the Confirm New Password...

24
Incorrect password. The entered Administrator Password of the network disk
recorder is incorrect. Enter the correct Administrator Password. File error. Check whether the write protection is applied for the folder in
which this software is to be installed or not. Check also the
available disk space. If this error occurs continuously, restart
this software.
Upgrade the setup menu of the WJ-ND300 to
version 2.0 or later.
Since WJ-ND300 series differs from the version
of a setup under edit, it cannot...

25
•Is the same IP address provided to other devices?
Refer to a system administrator for further informa-
tion. •Are you accessing the wrong IP address?
Check the connection as follows:
>ping IP address of this unit
If there is a reply from this unit, the connection is nor-
mal.
If not, check the settings of the IP address and the
subnet mask. •Is the valid IP address set?
Refer to a system administrator for further informa-
tion. •Is the connection indicator of the 10/100BASE-T port
lit? When it is not...

26
6, 723
Cannot login.
The installer started up at
startup of this software, or
the message window saying
that it is necessary to re-
install this software was dis-
played. 
Reference 
pages Cause/solutionSymptom
•Are the correct password entered? 
Confirm the correct password.
•It may be possible that the initial setup files have been
removed, edited, or moved from their original directo-
ry path.
Re-install this software following the displayed instruc-
tions, or re-install after uninstalling the...

For U.S., Canadian and Puerto Rican fields:
Panasonic System Solutions Company, 
Unit Company of Panasonic Corporation of North America
Security Systems
www.panasonic.com/security
For customer support, call 1.877.733.3689
Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey 07094
Zone Office
Eastern: Three Panasonic Way, Secaucus, New Jersey 07094
Central: 1707 N. Randal Road, Elgin, IL 60123
Southern: 1225 Northbrook Parkway, Suwanee, GA 30024
Western: 6550 Katella Ave., Cypress, CA 90630...