Panasonic Aj D750 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Aj D750 Operating Instructions Manual. The Panasonic manuals for Cassette Player are available online for free. You can easily download all the documents as PDF.
Page 51
Setup menus USER menu ItemSetting No. Superimposed No. Superimposed displaydisplay Description 400STILL00000.5s TIMER 00015s 0002 10s 000320s 0004 30s 0005 40s 000650s 0007 1 min 00082min 401SRC0000 PROTECT 0001 STEP HALF This selects the time to be taken until the unit goes into the tape protection mode when it is left standing in the stop or search still (JOG/VAR/SHTL) mode. (Unit: s = second, min = minute) With the DV format, the maximum time which can be set is 10s even when a setting above 10s...
Page 52
USER menu
Page 53
Setup menus USER menu (continued) ItemSetting No.SuperimposedNo.Superimposed display display Description 506 BINARY0000000This sets the usage status of the user bit of the time code GP 0001001generated by the TCG. 0002 0003010 0: 011 0004 0005100 2:101 3 .0006110 4:0007111 5: 6: 7: NOT SPECIFIED (character set not specified) ISO CHARACTER (8 bits character set based on ISO646, ISO2022) UNASSIGNED 1 (undefined) UNASSIGNED 2 (undefined) UNASSIGNED 3 (undefined) PAGE/LINE UNASSIGNED 4 (undefined)...
Page 54
Setup menus
Page 55
USER menu ItemSetting No.SuperimposedNo.Superimposed displaydisplay Description 700CH1 IN LV 701CH2 IN LV 702CUE IN LV 703CH1 OUT LV 704CH2 OUT LV 705CUE OUT LV 706MONIL OUT LV 707MONIR OUT LV 708MONI OUT 709 EMPHA- SIS 710 CH1 IN SEL 0000 0001 0002 0000 0001 0002 0000 0001 0002 0003 0000 0001 0002 0000 0001 0002 0000 0001 0002 0000 0001 0002 0000 0001 0002 0000 0001 0000 0001 0000 0001 4dB 0dB –20dB 4dB 0dB –20dB 4dB 0dB –20dB –60dB 4dB 0dB –20dB 4dB 0dB –20dB 4dB 0dB –20dB 4dB 0dB –20dB 4dB 0dB –20dB...
Page 56
Setup menus USER menu (continued) ItemSetting No.SuperimposedNo.Superimposed display 711 CH2 IN SEL 00000001 0000 0001 0002 0000 0001 0002 0000 0001 0002 display ANA DIGI 712 DIGI IN SEL 713 MONI CH SEL 714 REC CH1 715 REC CH20000CH1 0001 CH2 0002 CH1+2AES SIF1-2 SIF3-4 MANU AUTO 1 AUTO 2 CH1 CH2 CH1+2 Description This selects the CH2 input when USER SET has been selected by pressing the units AUDIO input selector switch. 0: Analog input. 1: Digital input. This selects the CH1 and CH2 digital input...
Page 57
USER menu (continued) Item No.Superimposed display 716 REC CUE 717 SCALE DISP 718 DV OUTPUT 719 PB FADE 720EMBEDDED AUD Setting No.Superimposed displayDescription 0000 0001 0002 0003 0000 0001 0000 0001 0002 0000 0001 0002 0000 0001 CUE CH1 CH2 CH1+2 FULL FINE ST1 ST2 ST1+2 AUTO CUT FADE OFF ON This selects the input signal recorded in CUE. 0: CUE IN 1: Audio CH1 input 2: Audio CH2 input 3:Audio CH1 and CH2 MIX signal This selects the level meter scale. 0: Full scale. 1: Fine scale. This selects the...
Page 58
Time code/user bit Time code The time code is used when the time code signal generated by the time code generator (time code signal generator) is to be recorded on the tape, its values are to be read by the time code reader (time code signal reader), and the absolute position of the tape is to be displayed in increments of hours, minutes, seconds and frames. The time code is written in the sub-code area (data area) of the helical track. This enables insert editing to be conducted independently using the...
Page 59
Recording internal/external time codes 1. Setting the internal time code Place the VTR in the stop mode. Set the TC/CTL switch to TC. Set the TC INT/EXT switch to INT. (internal time code selected) Set the REC RUN/FREE RUN switch position. REC RUN:The time code runs at the same time as the recording proceeds. FREE RUN:The time code runs in the same way as the time regardless of the VTR’s operation. Set the REGEN/PRESET switch position. REGEN:Continuity is maintained with the recorded time code before...
Page 60
Reproducing the time code/user bit Place the unit in the stop mode. Set the TC/CTL button to TC. Set the TC/UB switch to TC or UB. TC: The time code is displayed. UB: The user bit is displayed. When it is no longer possible to read the time code, it is interpolated using the CTL signal. Press the PLAY button. Playback now commences, and the time code appears on the display. When setting menu No.006 (SUPER) is ON, the time code value is superimposed onto the video signal from the VIDEO OUT 3 connector....