Panasonic Aj-D950 Aj-Pd950 Operating Instructions Manual

							Ð 32 Ð
Automatic editing
Switch settings and adjustments
When the unit is used as the recorder:
POWER ON
OFF
L
LEVEL CH4 CUE
DVCPRO
AUDIO ANALOGVIDEO Y PB PR
AES/EBU USER SETCMPST
INPUT SELECT
SDI
CH CONDITION
SCH CFSHIFT ADJ START RESET
STAND BYUB EXT EETC INT
TC   MODETAPE
LOCALREV FWD
PULL
OPEN JOGPUSHEJECT
AUTO OFF
SHTL
SLOWCONTROLREMOTE
EDIT
REWPLAYSERVO
STOP PLAYER
REC
REC INHIBIT
FF RECORDER
TC/CTL
TC SET
INSERT CH2
TRIM
V
INSET CH3 CH4 CUE TC
AUTO EDIT
PREROLL PREVIEW
REVIEW REC
PB
PULL FOR VARIABLE PULL
OPENHEADPHONESCH1 CH2 R
METER
FULL/FINE
MONITOR SELECT
W
–+
SDI
SDTI(V&A)
VOUT
ASSEMVIDEO CH1
AOUTAIN
CH3
Set the time counter display to TC or CTL.
Set the POWER switch
to ON.Select the video and audio input
signals using the INPUT SELECT
switches.Set the CONTROL
switch to LOCAL.
Adjust the recording level.
When the unit is used as the player:
POWER ON
OFF
L
LEVEL CH4 CUE
DVCPRO
AUDIO ANALOGVIDEO Y PB PR
AES/EBU USER SETCMPST
INPUT SELECT
SDI
CH CONDITION
SCH CFSHIFT ADJ START RESET
STAND BYUB EXT EETC INT
TC   MODETAPE
LOCALREV FWD
PULL
OPEN JOGPUSHEJECT
AUTO OFF
SHTL
SLOWCONTROLREMOTE
EDIT
REWPLAYSERVO
STOP PLAYER
REC
REC INHIBIT
FF RECORDER
TC/CTL
TC SET
INSERT CH2
TRIM
V
INSET CH3 CH4 CUE TC
AUTO EDIT
PREROLL PREVIEW
REVIEW REC
PB
PULL FOR VARIABLE PULL
OPENHEADPHONESCH1 CH2 R
METER
FULL/FINE
MONITOR SELECT
W
–+
SDI
SDTI(V&A)
VOUT
ASSEMVIDEO CH1
AOUTAIN
CH3
Set the time counter display to TC or CTL.
Set the POWER switch to ON.Set the CONTROL
switch to REMOTE.
Adjust the playback level. 
						

							Ð 33 Ð
POWER ON
OFF
L
LEVEL CH4 CUE
DVCPRO
AUDIO ANALOGVIDEO Y PB PR
AES/EBU USER SETCMPST
INPUT SELECT
SDI
CH CONDITION
SCH CFSHIFT ADJ START RESET
STAND BYUB EXT EETC INT
TC   MODETAPE
LOCALREV FWD
PULL
OPEN JOGPUSHEJECT
AUTO OFF
SHTL
SLOWCONTROLREMOTE
EDIT
REWPLAYSERVO
STOP PLAYER
REC
REC INHIBIT
FF RECORDER
TC/CTL
TC SET
INSERT CH2
TRIM
V
INSET CH3 CH4 CUE TC
AUTO EDIT
PREROLL PREVIEW
REVIEW REC
PB
PULL FOR VARIABLE PULL
OPENHEADPHONESCH1 CH2 R
METER
FULL/FINE
MONITOR SELECT
W
–+
SDI
SDTI(V&A)
VOUT
ASSEMVIDEO CH1
AOUTAIN
CH3
1, 2
3
Select the editing mode
1Select the editing mode.
For assemble editing, press the ASSEMBLE button.
For insert editing, press the INSERT button.
ASSEMBLE:The assemble editing mode (in which cuts are joined together) is
established.
INSERT:The insert editing mode (in which cuts are inserted) is established.
2Select the editing channel.
With assemble editing, the ASSEMBLE lamp light.
With insert editing, press the button of the channel whose signals are to be edited and
light its lamp.
3Select the VTR to be operated (this setting is performed when editing with 2 VTRs).
Press the PLAYER or RECORDER button to select the VTR.
PLAYER:Press this button to operate the player VTR and enter the edit points.
RECORDER:Press this button to operate the recorder VTR (this unit) and enter the
edit points. 
						

							Ð 34 Ð
Automatic editing
Entering the edit points
1Search for the edit IN point by performing the jog or shuttle operation.
Establish the still picture mode at the desired position.
Refer to page 28 for details on the jog/shuttle operations.
2Press the IN and SET buttons together.
The edit IN point is now entered.
The edit IN point value now appears on the display.
3Search for the edit OUT point by performing the jog or shuttle operation.
Establish the still picture mode at the desired position.
Refer to page 28 for details on the jog/shuttle operations.
4Press the OUT and SET buttons together.
The edit OUT point is now entered.
The edit OUT point value now appears on the display.
POWER ON
OFF
L
LEVEL CH4 CUE
DVCPRO
AUDIO ANALOGVIDEO Y PB PR
AES/EBU USER SETCMPST
INPUT SELECT
SDI
CH CONDITION
SCH CFSHIFT ADJ START RESET
STAND BYUB EXT EETC INT
TC   MODETAPE
LOCALREV FWD
PULL
OPEN JOGPUSHEJECT
AUTO OFF
SHTL
SLOWCONTROLREMOTE
EDIT
REWPLAYSERVO
STOP PLAYER
REC
REC INHIBIT
FF RECORDER
TC/CTL
TC SET
INSERT CH2
TRIM
V
INSET CH3 CH4 CUE TC
AUTO EDIT
PREROLL PREVIEW
REVIEW REC
PB
PULL FOR VARIABLE PULL
OPENHEADPHONESCH1 CH2 R
METER
FULL/FINE
MONITOR SELECT
W
–+
SDI
SDTI(V&A)
VOUT
ASSEMVIDEO CH1
AOUTAIN
CH3
1, 32, 4
Match frame processing function
When using two VTRs for editing, a total of four edit pointsÑnamely, the playerÕs IN and OUT
points and the recorder Õs IN and OUT pointsÑneed to be entered. However, since the last
edit point is calculated automatically, only three of these edit points must be entered.
Negative duration function
This function is used by combining setup menu No. 301 (IN/OUT DEL) and No. 302 (NEGA
FLASH) described on page 52. 
						

							Ð 35 Ð
POWER ON
OFF
L
LEVEL CH4 CUE
DVCPRO
AUDIO ANALOGVIDEO Y PB PR
AES/EBU USER SETCMPST
INPUT SELECT
SDI
CH CONDITION
SCH CFSHIFT ADJ START RESET
STAND BYUB EXT EETC INT
TC   MODETAPE
LOCALREV FWD
PULL
OPEN JOGPUSHEJECT
AUTO OFF
SHTL
SLOWCONTROLREMOTE
EDIT
REWPLAYSERVO
STOP PLAYER
REC
REC INHIBIT
FF RECORDER
TC/CTL
TC SET
INSERT CH2
TRIM
V
INSET CH3 CH4 CUE TC
AUTO EDIT
PREROLL PREVIEW
REVIEW REC
PB
PULL FOR VARIABLE PULL
OPENHEADPHONESCH1 CH2 R
METER
FULL/FINE
MONITOR SELECT
W
–+
SDI
SDTI(V&A)
VOUT
ASSEMVIDEO CH1
AOUTAIN
CH3
21, 3
Checking the edit points
1Press the IN (or OUT) button to check the edit point.
The value of the entered edit point appears on the display.
2Press the PREROLL button while holding down the IN (or OUT) button to check the
image at the edit point.
The tape is cued at the edit IN (or OUT) point, and the still picture mode at that point is
displayed.
¥The EE mode is established if the TAPE/EE switch has been set to the ÒEEÓ position
when ÒSTOPÓ has been selected for the setup menu No. 315 (AFTER CUE-UP).
3Press the IN and OUT buttons together to check the edit duration.
The duration time appears on the display.
Calculating the duration
¥When both edit points have been set, the duration between the two edit points.
¥When only one edit point has been set, the duration between the set data and the current
tape address.
¥When neither edit point has been set, the duration of the previously edited interval. 
						

							Ð 36 Ð
POWER ON
OFF
L
LEVEL CH4 CUE
DVCPRO
AUDIO ANALOGVIDEO Y PB PR
AES/EBU USER SETCMPST
INPUT SELECT
SDI
CH CONDITION
SCH CFSHIFT ADJ START RESET
STAND BYUB EXT EETC INT
TC   MODETAPE
LOCALREV FWD
PULL
OPEN JOGPUSHEJECT
AUTO OFF
SHTL
SLOWCONTROLREMOTE
EDIT
REWPLAYSERVO
STOP PLAYER
REC
REC INHIBIT
FF RECORDER
TC/CTL
TC SET
INSERT CH2
TRIM
V
INSET CH3 CH4 CUE TC
AUTO EDIT
PREROLL PREVIEW
REVIEW REC
PB
PULL FOR VARIABLE PULL
OPENHEADPHONESCH1 CH2 R
METER
FULL/FINE
MONITOR SELECT
W
–+
SDI
SDTI(V&A)
VOUT
ASSEMVIDEO CH1
AOUTAIN
CH3
3-1, 3-2
2
1
Automatic editing
Modifying the edit points
1Re-entering the edit points
Search for the new edit point by performing the jog or shuttle operation, and press the
IN (or OUT) and SET buttons together to re-enter the edit point.
2Modifying the edit point in frame units (trim function)
Press the TRIM button while holding down the IN (or OUT) button.
The edit point is put ahead by 1 frame each time the + button is pressed.
The edit point is put back by 1 frame each time the Ð button is pressed.
3Resetting the edit points
3-1Resetting both the edit IN and OUT points
¥ Press the RESET button.
3-2Resetting either the edit IN or OUT point
¥ Press the RESET button while holding down the IN (or OUT) button.

¥Edit points can be reset only in the CTL mode.
¥An edit OUT point can be reset even while editing is in progress.
¥The IN and OUT points are automatically reset during the eject mode. 
						

							Ð 37 Ð
POWER ON
OFF
L
LEVEL CH4 CUE
DVCPRO
AUDIO ANALOGVIDEO Y PB PR
AES/EBU USER SETCMPST
INPUT SELECT
SDI
CH CONDITION
SCH CFSHIFT ADJ START RESET
STAND BYUB EXT EETC INT
TC   MODETAPE
LOCALREV FWD
PULL
OPEN JOGPUSHEJECT
AUTO OFF
SHTL
SLOWCONTROLREMOTE
EDIT
REWPLAYSERVO
STOP PLAYER
REC
REC INHIBIT
FF RECORDER
TC/CTL
TC SET
INSERT CH2
TRIM
V
INSET CH3 CH4 CUE TC
AUTO EDIT
PREROLL PREVIEW
REVIEW REC
PB
PULL FOR VARIABLE PULL
OPENHEADPHONESCH1 CH2 R
METER
FULL/FINE
MONITOR SELECT
W
–+
SDI
SDTI(V&A)
VOUT
ASSEMVIDEO CH1
AOUTAIN
CH3
1
Preview
1After the edit points have been entered, press the PREVIEW button.
Normal preview is now performed.

¥If the edit IN point has not been entered, the position where the PREVIEW button was
pressed will be entered at the edit IN point.
¥To stop the preview at any time, press the STOP button.
¥If the PREVIEW button is pressed again while preview is in progress after the IN point,
preview will start again from the beginning.
¥When the edit OUT point is reached, the unit automatically goes into the stop mode. 
						

							Ð 38 Ð
POWER ON
OFF
L
LEVEL CH4 CUE
DVCPRO
AUDIO ANALOGVIDEO Y PB PR
AES/EBU USER SETCMPST
INPUT SELECT
SDI
CH CONDITION
SCH CFSHIFT ADJ START RESET
STAND BYUB EXT EETC INT
TC   MODETAPE
LOCALREV FWD
PULL
OPEN JOGPUSHEJECT
AUTO OFF
SHTL
SLOWCONTROLREMOTE
EDIT
REWPLAYSERVO
STOP PLAYER
REC
REC INHIBIT
FF RECORDER
TC/CTL
TC SET
INSERT CH2
TRIM
V
INSET CH3 CH4 CUE TC
AUTO EDIT
PREROLL PREVIEW
REVIEW REC
PB
PULL FOR VARIABLE PULL
OPENHEADPHONESCH1 CH2 R
METER
FULL/FINE
MONITOR SELECT
W
–+
SDI
SDTI(V&A)
VOUT
ASSEMVIDEO CH1
AOUTAIN
CH3
1
Automatic editing
Executing automatic editing
1Press the AUTO EDIT button.
Automatic editing is now performed.
¥To stop the editing at any time, press the STOP button.
¥When the edit OUT point is reached, the unit goes into the stop mode after postrolling.
Postroll
With assemble editing, editing continues for approx. 2 seconds even after the edit OUT point
has been passed, the tape is rewound to the OUT point, and the unit goes into the stop
mode.
With insert editing, the unit goes into the play mode after the edit OUT point has been
passed, the tape is rewound to the OUT point, and the unit goes into the stop mode.
Retry function
If the AUTO EDIT button is pressed again after the STOP button has been pressed to stop
the editing, editing will start again from the beginning.
Auto tag editing
If the AUTO EDIT button is pressed when the next edit point has not yet been entered upon
completion of editing, the previous edit OUT point will be entered as the IN point, and editing
is performed accordingly.
To release the auto tag mode, press one of the tape transport buttons (PLAY, etc.).

¥The entered points are automatically cleared after editing is executed. However, the
previous editing points can be recalled by pressing the TRIM+ (or TRIMÐ) and SET buttons
together. 
						

							Ð 39 Ð
Review
1Upon completion of the editing, press the REVIEW button.
The review is started in the recorder.
¥To stop the review at any time, press the STOP button.
¥When the edit OUT point is reached, the unit goes into the stop mode after postrolling.
POWER ON
OFF
L
LEVEL CH4 CUE
DVCPRO
AUDIO ANALOGVIDEO Y PB PR
AES/EBU USER SETCMPST
INPUT SELECT
SDI
CH CONDITION
SCH CFSHIFT ADJ START RESET
STAND BYUB EXT EETC INT
TC   MODETAPE
LOCALREV FWD
PULL
OPEN JOGPUSHEJECT
AUTO OFF
SHTL
SLOWCONTROLREMOTE
EDIT
REWPLAYSERVO
STOP PLAYER
REC
REC INHIBIT
FF RECORDER
TC/CTL
TC SET
INSERT CH2
TRIM
V
INSET CH3 CH4 CUE TC
AUTO EDIT
PREROLL PREVIEW
REVIEW REC
PB
PULL FOR VARIABLE PULL
OPENHEADPHONESCH1 CH2 R
METER
FULL/FINE
MONITOR SELECT
W
–+
SDI
SDTI(V&A)
VOUT
ASSEMVIDEO CH1
AOUTAIN
CH3
1 
						

							Ð 40 Ð
POWER ON
OFF
L
LEVEL CH4 CUE
DVCPRO
AUDIO ANALOGVIDEO Y PB PR
AES/EBU USER SETCMPST
INPUT SELECT
SDI
CH CONDITION
SCH CFSHIFT ADJ START RESET
STAND BYUB EXT EETC INT
TC   MODETAPE
LOCALREV FWD
PULL
OPEN JOGPUSHEJECT
AUTO OFF
SHTL
SLOWCONTROLREMOTE
EDIT
REWPLAYSERVO
STOP PLAYER
REC
REC INHIBIT
FF RECORDER
TC/CTL
TC SET
INSERT CH2
TRIM
V
INSET CH3 CH4 CUE TC
AUTO EDIT
PREROLL PREVIEW
REVIEW REC
PB
PULL FOR VARIABLE PULL
OPENHEADPHONESCH1 CH2 R
METER
FULL/FINE
MONITOR SELECT
W
–+
SDI
SDTI(V&A)
VOUT
ASSEMVIDEO CH1
AOUTAIN
CH3
2
Split editing
Split editing refers to editing where the editing channels are switched while insert editing is in
progress.
1Perform insert editing.
2Switch the editing channel.
When, for instance, sound from AUDIO CH2 is to be additionally inserted during video
channel insert editing:
2-1Press the AUDIO CH2 button during video channel editing.
The lamp in the button lights and the AUDIO CH2 sound is insert edited.
2-2Press the AUDIO CH2 button again and turn off the lamp in the button.
This completes the AUDIO CH2 insert editing. 
						

							Ð 41 Ð
TCR 00:00:00:00
     AUTO EDIT
This denotes audio split editing.
Audio split editing
The video edit points and audio edit points can be entered separately, and they can be offset
from each other and edited.
The audio edit points cannot be entered when the assemble editing mode has been
selected. After the edit points have been entered, follow the same operating procedure as
that for insert editing.
nEntering the edit points
Video IN point: Press the SET button while holding down the IN button.
Video OUT point: Press the SET button while holding down the OUT button.
Audio IN point: Press the SET button while holding down the A-IN button.
Audio OUT point: Press the SET button while holding down the A-OUT button.
nDeleting the edit points
Video IN point: Press the RESET button while holding down the IN button.
Video OUT point: Press the RESET button while holding down the OUT button.
Audio IN point: Press the RESET button while holding down the A-IN button.
Audio OUT point: Press the RESET button while holding down the A-OUT button.
n Modifying the edit points
Video IN point: Press the TRIM+ or TRIMÐ button while holding down the IN button.
Video OUT point: Press the TRIM+ or TRIMÐ button while holding down the OUT button.
Audio IN point: Press the TRIM+ or TRIMÐ button while holding down the A-IN button.
Audio OUT point: Press the TRIM+ or TRIMÐ button while holding down the A-OUT button.
nIndicating audio split editing
When the audio edit points are entered, Ò * Ó appears superimposed on the front panel and
TV monitor to denote audio split editing.
POWER ON
OFF
L
LEVEL CH4 CUE
DVCPRO
AUDIO ANALOGVIDEO Y PB PR
AES/EBU USER SETCMPST
INPUT SELECT
SDI
CH CONDITION
SCH CFSHIFT ADJ START RESET
STAND BYUB EXT EETC INT
TC   MODETAPE
LOCALREV FWD
PULL
OPEN JOGPUSHEJECT
AUTO OFF
SHTL
SLOWCONTROLREMOTE
EDIT
REWPLAYSERVO
STOP PLAYER
REC
REC INHIBIT
FF RECORDER
TC/CTL
TC SET
INSERT CH2
TRIM
V
INSET CH3 CH4 CUE TC
AUTO EDIT
PREROLL PREVIEW
REVIEW REC
PB
PULL FOR VARIABLE PULL
OPENHEADPHONESCH1 CH2 R
METER
FULL/FINE
MONITOR SELECT
W
–+
SDI
SDTI(V&A)
VOUT
ASSEMVIDEO CH1
AOUTAIN
CH3
A-IN
buttonA-OUT
button