Panasonic Cf Vdw07chm Owners Manual

11
Respectez attentivement les consignes
suivantes  afin d’éviter la possibilité de
surchauffe, d’incendie ou de dégât.
Tenez la batterie à l’ácart de la
chaleur
Ne jetez pas la batterie au feu ou
ne la soumettez pas à une chaleur
excessive.
Tenez à l’ácart d’objets divers
Ne placez pas la batterie avec des
objets tels que des colliers ou des
épingles à cheveux pendant le
transport ou le rangement.
Ne démontez pas la batterie
N’insérez pas d’objets pointus
dans la pile. Ne la soumettez pas
aux secousses...

12[Illustrations de ce manuel]
WindowsXPreprésente le système d’exploitation Microsoft® Windows® XP Professional.
Windows 2000représente le système d’exploitation Microsoft® Windows® 2000 Professional.
Certaines illustrations de ce manuel peuvent être légèrement différentes des objets qu’elles
représentent de façon à rendre les explications plus claires.
Les écrans qui sont représentés dans ce manuel, lorsqu’ aucune remarque spécifique sur
les écrans affichés n’est nécessaire, sont ceux de Windows XP.
Si...

13
E
Thank you for purchasing the wireless display for the Panasonic toughbook computer se-
ries.
This wireless display features a touchscreen function, which makes computer operation
possible by simply touching the surface of the wireless display.
Operating Instructions ............ 1 Wireless Display........................ 1
ENGLISH
Model No : CF-VZSU21 Model No : CF-AA1623A
Battery Pack......... 1 AC Adaptor ........... 1AC Cord................ 1
The stylus is in the wireless display at the
time of...

14
E
First-time Operation

Power Switch
Battery pack status  page 27
Power status
Not lit: Power off
Green: Power on
LCD
 page 38
Capture Button
Menu Button
LED Indicator
 page 23
R-Button

R-BUTTON
CAPTURE
 page 31
MENU
1Select two screw holes from the fol-
lowing four holes.2Adjust the strap to its maximum
length. Attach one side of the strap and
fasten the screw.
3Attach the other side of the strap and
fasten the screw.4Adjust the length of the strap as de-
sired.
outside part of
the strapinside part...

15
E
Battery Pack Slot
DC-IN JackDC-IN 16V
Stylus page 29


A lithium ion battery that is recyclable powers the product you
have purchased.  Please call 1-800-8-BATTERY for information
on how to recycle this battery.
L’appareil que vous vous êtes procuré est alimenté par une batterie
au lithium-ion. Pour des renseignements sur le recyclage de la
batterie, veuillez composer le 1-800-8-BATTERY.
NOTE

Select [Disabled] with the following procedure.
Windows XP
[Start] - [Control Panel] - [Performance and...

16
E
First-time Operation
Install MeiWDS Program/Software Keyboard
Install MeiWDS program:
1Place the CD-ROM attached to the wireless display into the CD/DVD drive.
2Windows XP
Select [start] - [Run], input [x:\meiwds\setup.exe]*1 and select [OK]. Follow the on-
screen instructions.
Windows 2000
Select [Start] - [Run], input [x:\meiwds\setup.exe]*1 and select [OK]. Follow the on-
screen instructions.
3Restart the computer.
4After restart, the Wireless Display Setup Utility (MeiWDS) icon  will appear on...

17
E
When using the serial port of the wireless display, install the driver by following steps.
Windows XP
1Select [start] - [Control Panel] - [Printers and Other Hardware].
2Select [Add Hardware] from [See Also], then select [Next].
3Select [Yes, I have already connected the hardware], then select [Next].
4Select [Add a new hardware device], then select [Next].
5
Select [Install the hardware that I manually select from a list (Advanced)], then select [Next].
6Select [Ports (COM & LPT)], then select...

18
E
Connector
Latch
Tab
1Slide the latch to the right, and open the cover, then in-
sert the battery pack in the wireless display.  After in-
serting the battery pack, close the cover, then slide the
latch to the left.
Setup the Wireless Display
First-time Operation
Limitation when using the serial port
When the wireless display is not connected to the computer, the serial port of the wireless
display cannot be used.
There are some serial devices and applications that will not work. This is because the...

19
E
4This screen should appear.
Set the computer’s parameters for wireless LAN functions and TCP/IP.
Set Network Type, SSID, WEP Encryption, IP Address, and NetMask according to the
above screen. (In the above settings, Network Type is shown as “AdHoc” in some cases,
while a term such as “Peer-to-Peer Group” is used here.)
2Connect the wireless display to a power outlet and turn on
the wireless display. (
 page 21)

Select network type.
AdHoc Infrastructure Cancel

Change setting on host PC to the...

20
E
Starting Up/Shutting Down
Starting Up
Do not maximize the Command Prompt screen. Once maximized, the connection
with the wireless display is interrupted and the screen cannot be returned to its origi-
nal size.

1Turn off the computer, then connect the port replicator, external display and
external keyboard.
2Turn on the computer and then press   Alt   +   Enter   in the MS-DOS mode to
return the window to its original size.

Press   Alt   +   Enter   on the computer.
If a computer establishes a...