Panasonic Cf W4gwczzbm Owners Manual

							
31
Getting Started
Information Menu
(An underline indicates the factory default settings)
Language• Select the language for di splaying the Setup Utility. English
Japanese
Model No.
Serial No.
CPU Type
CPU Speed
BIOS
Embedded Controller
System Memory
Primary Master To display and con-
firm information.  
These items cannot 
be selected or 
changed.
Optical Drive
• When [CD/DVD Drive Power] has been set to [Off] in [Main] menu, [Power Off] is dis-played.
Accumulative Operating Time
Main Menu
(An underline indicates the factory default settings)
System Time • Time is shown in 24-hr. style.
•The 
Tab key can be used to move hour/minute/second. Numerical values can be 
adjusted using the 
F5 key and the F6 key. [xx:xx:xx]
System Date
• Date is shown in order of Month/Day/Year.
•The 
Tab key can be used to move Month/Day/Year. Numerical values can be adjusted 
using the 
F5 key and the F6 key. [xx/xx/xxxx]
Touch Pad
• Select whether to use the touch pa d ([Enable]) or not ([Disable]). Disable
Enable
Fn/Ctrl Key
• Select whether to switch the 
Fn key with the Ctrl key functions, and vice versa on the 
internal keyboard.
• Do not attempt to replace the markings on the keys, or the keys themselves. NormalReplace
Display
• The display destination in cases where Windows is not running is set here.
• If an external display is  not connected, all information  will appear on the internal LCD 
even if [External Monitor] is selected.
After Windows starts up, the screen is displayed on the display destination set in the fol-
lowing menu.
[start] - [Control Panel] - [Other Control Panel  Options] - [Intel(R) GMA Driver for Mobile] - 
[Devices] External Monitor
Internal LCD
Display Expansion
• Select whether to have the display expanded  when not using the native screen resolution.Disable
Enable 
						

							
Setup Utility
32
Getting Started
NOTE
zThe [Advanced] menu cannot be  changed when the Setup Utility is started up with the User Password.
NOTE
zWhen the Setup Utility is started up with the User Passwo rd, only a limited number of items can be displayed 
and set. ( Îpage 29)
z [SD Startup], [SD Setting Meth od] and [Clear registered SD card] will be displa yed only when an SD memory 
card has been registered.
z When starting up the computer, if the message [Hard disk access is prohibited “Hard Disk Lock”] appears, start 
up the Setup Utility, and reset th e details to match the settings when [Hard Disk Lock] was set.
CD/DVD Drive Power
• You can set the drive powe r to [On] or [Off] when the computer is started up.
• When set to [Off]: • From the next time you start the com puter, you will be unable to start up from 
DVD-ROM & CD-R/RW drive. The disk cover cannot be opened until Win-
dows has started. To start up from  the DVD-ROM & CD-R/RW drive (give 
preference to [USB CDD] (internal  DVD-ROM & CD-R/RW drive) in the 
[Boot] menu), set this to [On].
• If operations are resumed from hibernation mode while a disk is set, it may  take about 20 seconds for operations to resume.
• The drive power cannot be turned on/off with the drive power/open switch until Windows  starts, regardless of the current on/off status. Off
On
Battery Charging Indicator
• Set the battery indicator to turn on or flash while the battery pack is recharging. On Continuous
Flashing
(An u
nderline indicates the factory default settings)
Advanced Menu
(An underline indicates the factory default settings)
Modem
• Select whether to use the internal mode m function ([Enable]) or not ([Disable]). 
(This does not work for the external modem.) Disable
Enable
LAN
• Select whether to use the internal LAN  function ([Enable]) or not ([Disable]).
(This does not work for the external LAN card.) Disable
Enable
Wireless LAN
• Select whether to use the internal wireless  LAN function ([Enable]) or not ([Disable]). 
(This does not work for the external wireless LAN card.) Disable
Enable
Legacy USB Support
• Select whether to use the function that ma kes the computer recognize internal DVD-ROM 
& CD-R/RW drive, USB keyboard and USB floppy disk ([Enable]) or not ([Disable]) before 
starting Windows. Disable
Enable
Security Menu
(An underline indicates the factory default settings)
Execute-Disable Bit Capability
• When [Execute-Disable Bit Capability] is set to  [Enable], it means that this computer sup-
ports hardware-based Data Execution Preven tion (DEP). It should usually be set to 
[Enable]. DEP is a set of hardware and software technologies that perform additional 
checks on memory to help prevent malicious code from running on a system. Disable
Enable 
						

							
33
Getting Started
In the [Boot] menu, the names of the connected devic es (including internal devices) will be displayed.
USB CDD: MATSHITA UJDA7XX is the internal DVD-ROM & CD-R/RW drive.
To move a device up by one, select th e device in [Boot priority order] using the  Ï
 or Ð key, and press the F6 key. 
To move a device down by one, select the device in [Boot priority order] using the  Ï
 or Ð key, and press the F5 key.
z Panasonic USB floppy disk drive (CF-VFDU03 (opt ional)) can be used for startup (recommended).
z To return the startup order to the default settings, press the 
1 key. 
(The order of default settings is : USB FDD->IDE HDD->USB CDD->PCI LAN)
Password on boot
• Select whether you will need to  input ([Enable]) or not ([Disable]) the Supervisor Password 
or the User Password on booting. Disable
Enable
SD Startup
• Select whether to use an SD memory card instead of entering the password on booting 
([Enable]) or not ([Disable]).
• When registered SD memory ca rd, this is set to [Enable].
• Cannot be set when [Password on boot] is set to [Disable]. Disable
Enable
SD Setting Method
• Select whether to set an SD memo ry card to [Leave Set] or [Set and Eject] when an SD 
memory card is used instea d of entering the password.
• This can be set only if [SD Startup] has been set to [Enable].
• Cannot be set when [Password on boot] is set to [Disable]. Leave Set
Set and Eject
Clear registered SD card
• Clear the registration from all registered SD  memory cards not to be used instead of enter-
ing the password on booting. To the sub-menu
Set Supervisor Password
• Set a Supervisor Password if you wish to prevent any unauthorized changes to the Setup 
Utility settings, also if you require a password  on boot, set [Password on boot] to [Enable] 
after you set Supervisor Password. To the sub-menu
Setup Utility Prompt
• Select whether to display ([Enable]) or not to  display ([Disable]) the message “Press F2 for 
Setup/F12 for LAN” shown on the bottom of th e [Panasonic] boot screen that is displayed 
after starting this computer. Disable
Enable
Boot First Menu
• Select whether to display “Boot Menu” ([Enable]) or not ([Disable]). ( Îpage 34). Disable
Enable
Hard Disk Lock
• Select whether to enable ([Enable]) or  not disable ([Disable]) the [Hard Disk Lock]. 
• This function will not work without  the Supervisor Password being set. Disable
Enable
User Password Protection
• Select whether to permit changing the User  Password ([Protected]) or not ([No Protec-
tion]). No Protection
Protected
Set User Password
• Set User Password when multiple users use this computer, etc.For example, when the system administrator sets Supervisor Password and User Pass-
word and lets other users know only the User Password, other users cannot change some 
of the settings  in Setup Utility.
• This function will not work without  the Supervisor Password being set. To the sub-menu
Boot Menu
(An underline indicates the factory default settings) 
						

							
Setup Utility
34
Getting Started
NOTE
zWhen starting up from the internal DVD-ROM &  CD-R/RW drive, confirm the following settings.
• [CD/DVD Drive Power] is  [On] in the [Main] menu.
• [Legacy USB Support] is [Enable] in the [Advanced] menu.
The computer cannot be booted from the DVD-ROM & CD-R/RW  drive if the above settings are [Off] or [Disable].
z When starting up from a device connected by a USB port
• Check to make sure that [Legacy USB Support] is [Enable] in the [Advanced] menu.
z The [Boot] menu cannot be chan ged when the Setup Utility is star ted up with the User Password.
z If more than one of the same  device is connected, only one device name will be displayed.
z Boot Menu
The device for starting up the operating  system can also be selected during computer start-up.  After the computer 
is turned on and the 
Esc key is pressed at [Panasonic] boot screen,  [Boot Menu] (the device selection screen) will 
appear. When the [Boot Menu ] setting is changed, the selection screen display will  also change. [Boot Menu] is 
displayed only when [Boot First Menu] in the [Security] menu is set to [Enable].
z The computer cannot be booted from devices listed in [Excl uded from boot order]. For this reason, the order of pri-
ority cannot be changed in this list.
z Bootable CD created using the B’s Recorder in the CF-W2 and CF-Y2 series cannot be used on this computer. If 
you want to share bootable CD with those series, create a new bootable CD.
z This computer does not support startup operations from  CD/DVD drives other than the internal DVD-ROM & CD-
R/RW drive.
z To move a device from [Excluded from 
boot order] to [Boot priority order] (or vice 
versa):
Select the device using the  Ï
 or Ð key, 
and press the 
X key. The device you have 
moved will appear at th e end of the list 
when moving a device from [Excluded 
from boot order] to [Boot priority order]. 
Set the boot order as required.
Exit Menu
Save Values & Exit Exit the Setup Ut ility and save your changes to CMOS.
Exit Without Saving Changes Exit the Setup Utility without saving your changes to CMOS.
Get Default Values Set the Setup  Utility to the default settings.
• This item is not displayed when starting  up the Setup Utility with the User Password.
Load Previous Values Load previous values from CMOS for all Setup items.
Save Current Values Save your changes to CMOS. 
						

							
35
Operation
Useful Information
Usage/Handling/Maintenance
zPlace the computer on a flat stable surface.
Do not place the computer to tip over.  When the computer receives extremely 
strong shock after disk may become inoperable.
z Operation: Temperature: 5 °C to 35 °C {41 °F to 95 °F}
Humidity: 30% to 80% RH (No condensation)
z Storage: Temperature: -20 °C to 60 °C {-4 °F to 140 °F}
Humidity: 30% to 90% RH (No condensation)
• Even within the temperature and humidity  ranges noted above, using the com-
puter for long periods of time in an environment with exceptionally low or high 
temperatures or high humidity may result  in deterioration of the product, which 
can lead to a reduction in product life.
z Keep the computer clear of electromagnetic  cards and objects that emit electromagnetic 
waves.
• Do not place the computer near magnets, electromagnetic bracelets, or other mag- netic fields.
• This computer uses a magnet in the posi tion marked with a circle in the diagram 
on the left.  Do not place a magnetic ca rd or other magnetic field in contact with 
the computer.
‹ We recommend the following:
z Preparing a spare battery pack (sold separately).
z Making backup copies on  SD memory cards, etc. 
‹When Carrying the computer,  be sure to keep to the fol-
lowing:
z Turn off the computer.
z Remove all external devices, cables, PC Cards protruding from the computer (see 
figure A), and SD memory cards before transporting the computer.
z Close the display, and ensure that the latch ( Îpage 14) is positioned correctly in 
the slot.
Do not carry the computer by gripping the display or the cabinet around the display 
(see figure B).
z Do not drop or hit the computer against solid objects.
z When taking an airplane
• Always carry your computer and disks, et c with you. Never check it in with lug-
gage.
• Before using the computer inside an airplane, we recommend asking the airlines 
regarding their policy on this issue.
z When transporting a spare battery pack (sold separately) inside a package, brief-
case, etc., it is recommended that it be plac ed in a plastic bag in order to protect its 
contacts.
z If the computer is being carried in a soft bag when the battery pack has been 
removed, be careful to avoid undue pressure on the body of the computer in a 
crowded place, etc., as this may result in damage to the LCD.
z Care of the display / touch pad:
Wipe lightly with a gauze or  other dry, soft cloth.
z When the touch pad or other area other than the screen becomes dirty: wet a soft 
cloth with water or a diluted kitchen cle anser (neutral), wring the cloth out thor-
oughly, and wipe the dirty area gently.   Using a detergent other than a neutral 
kitchen cleanser (e.g., a weak alkali cleanser) may adversely affect painted sur-
faces.
Usage Environment
Handling
Maintenance 
						

							
Usage/Handling/Maintenance
36
Operation
Useful Information
CAUTION
zDo not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect 
the surface, e.g., discoloration. In a ddition, do not use commercially-available 
household cleaners and cosmetics, as th ey may contain components harmful to 
the surface.
z Do not directly add or spray water or detergent onto the computer. If liquid 
enters the inside of the computer, it may cause it to work improperly or be dam-
aged. 
						

							
37
Operation
Useful Information
Wireless LAN 
‹Do not use wireless LAN on ai rplanes, in hospitals, or 
in other locations where  wireless LAN signals may 
affect the operation of devices in the vicinity
z Abide by instructions regarding use in airplanes and hospitals.
z If you intend to use the computer in the environments described above, turn off the 
wireless LAN power. (below)
‹Prevent theft of data or unau thorized access to the hard 
disk via a wireless LAN
z When using the wireless LAN function, there is a danger that data may be stolen 
from the hard disk, or that shared files may be accessed. If you plan to use wireless 
LAN functions, we recommend that you do so only after making the appropriate 
security settings, such  as for encryption.
z Before using a wireless LAN, turn  it on using the wireless LAN switch.
z After turning the wireless LAN power on or off, it may take some time before the 
[Available Networks] screen is renewed.
1Slide the wireless LAN switch (A ) to turn the wireless LAN 
power on or off. 
z To turn the power on, slide the switch to the right. 
The wireless LAN icon   will show. 
z To turn the power off, slide the switch to the left. 
The wireless LAN icon   will show.
Enable/Disable Wireless LAN Standard IEEE802.11a
In some countries, communication using I EEE802.11a (5 GHz wireless LAN) standard 
is restricted by law. Comply with th e laws in the country concerned. (Îpage 3)
1Click the   icon (when the wi reless LAN is on) or the   
icon (when the wireless LAN is  off) on the notification area.
2To disable IEEE802.11a:
zClick [802.11a Disabled].
To enable IEEE802.11a:
zClick [802.11a Enabled].
Even when IEEE802.11a is enabled or disabled,   or   will not 
change.
Precautions
Turning on/off the Wireless LAN Power 
						

							
38
Operation
Useful Information
Windows/Antivirus Protection
Depending on the settings in Windows, installed applications, drivers, menus and other 
displays may be inoperable.
In some cases, certain functions, such as the password reset disk (Îpage 21), may 
not operate. In this case, refer to the items below, and the applied items from the prob-
lem-solving section of this manual and onscreen Reference Manual, Windows Help 
( Î page 12), and the software application and driver’s operating instructions, etc.
Change the Way User s Log on or off
If the checkmark is added for [Use the Welcom e screen] or [Use Fast User Switching] 
in [start] - [Control Panel] - [User Accounts] - [Change the way users log on or off], the 
operation differs as follows.
‹ Use the Welcome screen
The operations when starting up or shutting down Windows differ depending on 
whether this item has a checkmark or not.
• At the time of purchase, it  is set with the checkmark added.
• When [Use when logging on to Win dows] is set in [SD Card Setup] (Î “SD Mem-
ory Card Security Function” in the on screen Reference Manual), the Welcome 
screen cannot be used. 
‹ Use Fast User Switching
When adding the checkmark for this setting,  you can change to another user without 
logging on again when multiple users use the computer.
This manual explains the procedure fo r cases where the checkmark is added.
In the following case, Fast User Switching cannot be used.
z When the checkmark is not added for [Use the Welcome screen]
z When joining the network domain
z When the [Use when logging on to Wi ndows] is set in [SD Card Setup] (Î “SD 
Memory Card Security Function” in the onscreen Reference Manual)
Depending on the software application, the comp uter may not work properly if this func-
tion is used.
When switching to a different user with the Fast User Switching function, it may not be 
possible to set the display settings. In this case, log-off all users, and retry the opera-
tion.
Windows 
						

							
39
Operation
Useful Information
Use the Windows Security Center function to protect Windows from damage by com-
puter viruses, etc.
Windows Security Center
z What is Windows Security Center?
The Windows Security Center allows cent ralized management of Windows security 
information, and monitors antivirus measur es and other Windows security settings 
to ensure optimum safety.
Use the Windows Security C enter function to protect your computer from damage 
by viruses, etc.
Click [start] - [Control Panel]  - [Security Center] to display  the current settings for the 
following security functions.
• Windows Firewall A security system for protecting the computer from unauthorized access via the 
Internet or other external networks.
The firewall regulates the data exchanged between the computer and the net-
work, so that only approved data can pass through.
At the time of purchase, the Windo ws Firewall is set to be enabled.
• Automatic Updates If your computer is connected to the In ternet, this function regularly checks 
whether security updates and other important updates for Windows have been 
made available, and automatically installs these updates in their latest conditions.
• Virus Protection This function regularly chec ks whether antivirus software has been installed in the 
computer, and whether the version of that  software is the latest version available.
NOTE
zSome network-related software and some online network games do not operate 
normally if the Windows  Firewall is enabled. Ask th e software manufacturer 
about the Windows Firewall in the case of using such software.
z For further details on the Windows Firewall, see the help displayed by the fol-
lowing methods:
AClick [start] - [Help and Support] and in put [Windows Firewall] into [Search].
B Click [Windows Firewall overview].
If the message Your computer  might be at risk is displayed
Read the message, click the   (red) on th e notification area, and make the appropri-
ate settings.
This message, which the Windows Security  Center displays to confirm the security-
related settings regularly, w ill be displayed until the sett ings are made more properly.
NOTE
zThis message does not indicate an error. You can use the computer while the 
message is displayed. However, in orde r to operate the computer more safely, 
we recommend making the appropriate measures to reduce damage from virus 
and other attacks, thus avoiding the appearance of this message.
Security Center/Ant ivirus Protection 
						

							
Windows/Antivirus Protection
40
Operation
Useful Information
The Pop-up Blocker
In Windows XP, security functions have been strengthened with regard to Web con-
tents.
One of these is the Pop-up Blocker, whic h may prevent some Web pages from being 
displayed.
Computer Viruses
Users are advised to purchase the latest versions of virus protection software 
and use them regularly.
We recommend you run the software:
z When booting your computer.
z After receiving data.
We recommend that you check data received on disks or from external sources, such 
as data downloaded from the Internet, e-mail, etc. (For compressed files, uncompress 
them before running a check).
For Data Execution Prevention (DEP), you can make one of the settings in the follow-
ing menu. 
[start] - [Control Panel] - [Performance and Maintenance] - [System] - [Advanced] - 
[Settings] (in [Performance]) -  [Data Execution Prevention].
For more information, refer to Windows help.
Windows Update
You can use the latest patches and serv ice packs for Windows with the following 
menus.
Do not apply “Driver Updates” even if a message to update a driver appears. If a 
driver update is required, contact your technical support office.
[start] - [All Programs] - [Windows Update].