Panasonic Digital Audio Player Sv Mp010 Mp020 Operatinf Instructions

							
2121
MUSIC mode
Playing music
Press
or
When playback starts, the playback screen appears for approximately 2 
seconds, followed by the track name screen. After the track name has 
been displayed, the playback screen reappears. Preparation: 1. Record music on the unit. (
 page 13)
     2. Put on the earphones. ( page 2)
     3. Release the HOLD switch. ( page 19) 
Press
•  To save power, the unit will switch off if left continuously in playback stop mode 
for 60 seconds (Auto-off function).
• If “PROTECTED” appears on the display (
 page 33)
Note
•  When you adjust the volume, the screen will change from track name  display to the volume display.
•  Basic playback operations (
 page 19)
•  Setting various items ( page 24)
Playback icon Track numberPlay timeFolder name (The name of
the folder containing the track now playing is displayed.) Track information
Press
RQTT0855
21
1Turn the unit on. (Start play.)
2Adjust the volume. (0-25)
Playback screenTrack name screen
ABC
ABCED
3Stop play.
ED

MP010_020_P_2.indd   212006/03/06   14:24:21 
						

							
RQTT0855
22
Selecting a playlist and listening to music
•  After TRACK2 finishes playing, play continues to the last track of “MEDIA”, and then stops.
•  Track numbers are assigned to tracks in the order that the track is  recorded on the unit. Tracks will be played back in order from tracks 
with lower numbers to tracks with higher numbers.
   Example:  When you have selected the track numbered “002” to play, the next 
track to play back will be the track numbered “003” or higher.
or
PressPress
Press
or
PressPress
or
PressPress
Preparation: 1. Recording music on the unit ( page 13)
     2. Release the HOLD switch. ( page 19)
     3. Put on the earphones. ( page 2)
     4. Turn the unit on. ( page 19)
Press and hold
Selecting the track from which play is to start
Example: When you want to select TRACK2   1
Track number
1Display the playlist selection menu.
2Select “MEDIA”.
3Select “ARTIST-B”.
4Select “ALBUM-B2”.
5Select “TRACK2” and start play.

MP010_020_P_2.indd   222006/03/06   14:24:22 
						

							
23
MUSIC mode
RQTT0855
23
•  When there are playlists and tunes in a playlist, both will be displayed as items you can select.
• Basic playback operations ( page 19)
•  “–:– –:– –” will appear when the count of a track exceeds 10 hours during playback.
Note
Selecting the folder containing the tracks to be played (FOLDER PLA Y)
Example: To play all the tracks in ALBUM-B2   2
Select “FOLDER PLAY” in step 5. When you press [], all of the tunes in “ALBUM-B2” will play in the order in which they were recorded.
or
PressPress
•  When “FOLDER PLAY” is selected, all the tracks in the selected folder are played, and then play stops.•  When the lowest track number in the folder selected for “FOLDER  PLAY” is “005”, then playback will start from the track numbered “005”.
MUSIC
VOICE
LINE IN ARTIST_A
ARTIST_B
ALBUM_B
ALBUM_B
TRACK2.mp3
TRACK3.mp3
TRACK1.mp3FM RADOIO
MEDIAALL
MUSIC
FOLDER PLAY
FOLDERPLA
Y
ARTIST-B
ARTIST
-C
ARTIST
-AMusic
ALBUM -B1 ALBUM
-B2 ALBUM
-C1
TRACK2
TRACK1
FOLDER
PLAY
FOLDERPLA
Y
FOLDER PLAY icon is displayed.
  2  1
5Select “FOLDER PLAY”.
When “ALL MUSIC” is selected, all the tracks under the 
MEDIA folder are 
played, and then play stops.
■  Playlist selection menu
When music has been recorded using WMP10, the Music folder will be created automatically 
in the unit’s MEDIA 
folder, and the track 
files will be stored.

MP010_020_P_2.indd   232006/03/06   14:24:23 
						

							
RQTT0855
2424
You can set various items.
Setting various items
SOUND MODE
SET
PLAY MODE
ERASE MODE
SURROUND
EQ SETTING
REMASTER
SYSTEMBACKLIGHT
BEEP
CONTRAST
FORMA
T
A
B
D
C
1
2
3
4
1234
5
6
7
8
5678
ABDC
The icons matching the settings are displayed.

MP010_020_P_2.indd   242006/03/06   14:24:23 
						

							
2525
Setting mode
RQTT0855
2525
SOUND MODEEQ SETTINGNORMAL : No change in soundROCK : Adds impact JAZZ : Adds club-like
POP : Clarifies the treble range
CLASSIC : Adds concert hall-likeSURROUND ON :   The SURROUND effect with presenceOFF :  Normal play
REMASTERON :  Sound enhanced(Digital Re-master)OFF : Normal play
PLAY MODE NORMAL : Normal play
ALL-REP. : All tracks in a list repeat
ONE-REP. : 1 track repeatRANDOM : All tracks in a list random repeatERASE MODETRACK :  Erases selected tracks in the playlist.
MEDIA :  Erases all tracks in the playlist.
SYSTEMGeneral system setting  below
■  SET
SYSTEM
BACKLIGHT5s, 20s, 1minSetting the duration the display will light when a button is pressed
CONTRASTAdjusting the screen contrastBEEPON : A beep is sounded when a button is operated.OFF :   A beep is not sounded when a button is operated.
FORMAT The unit’s memory can be initialized (formatted) by the 
unit itself. Doing so will erase all the recorded data. 
 ( page 30)

MP010_020_P_2.indd   252006/03/06   14:24:24 
						

							
26
RQTT0855
26
Setting various items
The next time music is played, the unit will operate under the settings which have just been established.
Note
Making basic settings
Example:  Setting the amount of time for the backlight to be displayed
Preparation: 1. Release the HOLD switch. ( page 19)
     2. Turn the unit on. ( page 19)     
or
PressPress
Press
or
PressPressThe SYSTEM settings menu will be displayed.
or
PressPressThe BACKLIGHT time selection menu will be displayed.
or
PressPress
When the settings are completed, the playback 
screen will reappear.
Each time you press
  1min   ↔   5s         ↔   20s
 (1 minute) (5 seconds) (20 seconds)
2Select “SET”.
1Display the main menu.
3Select “SYSTEM”.
4Select “BACKLIGHT”.
5Select “1min”.

MP010_020_P_2.indd   262006/03/06   14:24:25 
						

							
27
Setting mode
RQTT0855
27
Example: When setting “ONE-REP.”
Press
or
PressPress
or
PressPress
 •  To release the settings, select NORMAL at the step 4.
 •  If “FOLDER PLAY” is selected on the playlist menu after “ALL-REP.” or 
“RANDOM” has been set, only the tracks in the selected folders are played.
Note
or
PressPress
The display returns to the playback screen where the “ONE-REP.” icon was displayed.
■  PLAY MODE settings
NORMAL : Normal play
ALL-REP. : 
All tracks in a list repeat
ONE-REP. : 
 One track repeat
RANDOM : All tracks in a list random repeat
1Display the main menu.
2Select “SET”.
3Select “PLAY MODE”.
4Select “ONE-REP.”.

MP010_020_P_2.indd   272006/03/06   14:24:25 
						

							
Erasing folders and files
The recorded data can be erased using the unit menu.
Preparation: 1. Release the HOLD switch. ( page 19)
     2. Turn the unit on. ( page 19)
or
PressPress
•  You cannot select and erase files in folders using this unit. Use your computer to 
select and erase files.
•  Do not delete the unit’s system.hds, Devlcon.fil and DevLogo.fil files. Doing so 
may cause the unit to malfunction.
Note
28
When erasing all the tracks in the folder
Example: When erasing all the tracks in the MEDIA folder
Press
MEDIA
ARTIST_A
ARTIST_B
ALBUM_A
TRACK1.mp3
This unitWhen erasing all the tracks in the 
MEDIA folder
When erasing a track
RQTT0855
28
2Select “SET”.
1Display the main menu.
In the ERASE MODE, two erasure methods can be selected.
1. Erase folders   By selecting the MEDIA folder, all the tracks in the 
selected folder are erased.
2. Erase tracks  The track now playing or stopped is erased.

MP010_020_P_2.indd   282006/03/06   14:24:26 
						

							
or
PressPress

or
PressPress

All the tracks in the MEDIA folder will be erased.
Example: When erasing TRACK1
While “TRACK1” is playing or stopped:
or
PressPress
Press
or
Press
Press
or
PressPress
29
When erasing a track
The selected TRACK1 is erased.
Press
or
Press
Other information
RQTT0855
29
3Select “ERASE MODE”.
4Select the folder to be erased.
5Select “YES”.
4Select “TRACK”.
5Select “YES”.
6Select “YES”.

MP010_020_P_2.indd   292006/03/06   14:24:27 
						

							
Formatting
The unit’s memory can be initialized (formatted) by the unit itself. Doing so will erase all the data recorded on it.
Initiate the formatting while the battery indicator shows a full charge.
Preparation: 1. Release the HOLD switch. ( page 19)
     2. Turn the unit on. ( page 19)
     3. Display the main menu. ( page 20)
Press
or
Press
or
PressPress
or
PressPress
or
PressPress
• Do not use your computer to format the unit’s memory.
•  Do not remove the battery during formatting. Doing so may cause the unit to 
malfunction.
•  If the remaining battery charge becomes depleted or the battery is removed 
before formatting is completed, initiate the reset procedure. ( page 31)
Note
or
PressPress
RQTT0855
30
5Select “YES”.
1Select “SET”. ( page 24, Setting various items)
2Select “SYSTEM”.
3Select “FORMAT”.
4Select “YES”.

MP010_020_P_2.indd   302006/03/06   14:24:27