Panasonic Digital Audio Player Sv Mp010 Mp020 Operatinf Instructions

							
31
Other information
RQTT0855
31
RESET procedure
If the screen display fails to change, operation is slow or the unit’s operation is otherwise unstable, try removing the battery and then putting it back inside. If the symptom still persists, follow the resetting 
procedure below. 
Initiating resetting makes it possible to delete files which cannot be 
deleted using the computer or the unit.Initiate the reset procedure while the battery indicator shows a full charge.1. Slide the [] to ON.
2. Turn the unit on.
3.  While “HOLD” screen is displayed, press the keys in the following  sequence: 
 [] → [–] → [+] → [–] → [+] → [].
• Resetting now begins, and after it is completed, the power turns off.
• After pressing [
], press the button for the next operation without delay.
• All settings return to the factory preset. All recorded tracks are erased.
•  Do not remove the battery during resetting. Doing so may cause the unit to malfunction.

MP010_020_P_2.indd   312006/03/06   14:24:28 
						

							
RQTT0855
32
Troubleshooting guide
Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the “Customer Services Directory” on page 8.
No operation• The HOLD function is on.
• Replace the battery if it is dead.
No sound, there is a lot of noise or it is hard to hear the sound• Ensure the earphone plug is inserted firmly.
• Wipe the plug clean with a clean cloth.
• Turn up the volume.
• Keep this unit away from mobile telephones.
■  Concerning the noise heard with 
"REMASTER" at "ON"
    With some CDs, noise may be heard in 
the treble range when playing the MP3 or 
WMA files created from those CDs with 
"REMASTER" at the "ON" setting. If noise is heard, set "REMASTER" to "OFF".
Play doesn’t resume from the track where I stopped play • This doesn’t work if:
 
You download or delete files, or change the 
battery. 
Play doesn’t start 
from the first track • The random play mode may be on. 
•  Play usually resumes from the track where you last 
stopped play. Use skip to return to the first track.
•  Ensure that "FOLDER PLAY" has not been selected. ( page 23)
The unit stops working•  Reinsert the battery after taking it out and keeping it out for 5 seconds, and turn on the 
power. If there is still no improvement, reset 
the unit. ( page 31, RESET procedure)
The display is too dark or too light
• Adjust the contrast. ( page 25)
The display just 
shows “WAIT…”•  “WAIT...” will be displayed while the unit is writing data to memory after the USB cable is removed following recording, and also while the unit is reading music data when the unit is turned on. Display time will vary depending on the number of songs recorded and the number of folders.
For 500 songs and 50 folders: Approx. 10 seconds

MP010_020_P_2.indd   322006/03/07   12:51:23 
						

							
Other information
RQTT0855
33
■  Displays
NO TRACKThere is no audio data in the MEDIA folder.
LOW BATTERY The battery is dead. Change the battery.
NO BATTERY Insert the battery.
HOLDThe HOLD switch is on.OVER LIMITYou have tried to record more than 999 tracks into folder. The number of folder hierarchies exceeds seven.
PROTECTED•  The track is protected so it cannot be played by the unit as is. Use Windows Media Player to transfer the tracks on the computer to the unit, and then play them on the unit. ( page 15, Using WMP9 or WMP10 to record music)
•  The deadline for using the track files downloaded 
from the music distribution service has passed.
•  The unit’s “secure clock” has been lost since either 
the battery is dead or it has not been installed. 
First install a new battery, connect the PC to the 
Internet, and then use the synchronizing function 
of the WMP10 to transfer the track files to the unit 
again. ( page 15, Using WMP9 or WMP10 to record music)
FILE ERROR This is a file which cannot be played by this unit.
The backlight does not light • The battery charge may be low. ( page 10)
The unit is not recognized even when it has been connected to the computer
•  Disconnect the USB cable, reboot the 
computer, and then connect the unit to the 
computer again.
The tracks downloaded from the subscription type music distribution service cannot be transferred to the unit using WMP10
•  The unit’s “secure clock” has been lost. First connect the PC to the Internet, and then use the synchronizing function of the WMP10 to transfer the tracks to the unit.
Secure clock:  A clock function required to play contents for which a period of validity or other time-based restriction has been set

MP010_020_P_2.indd   332006/03/06   14:24:28 
						

							
Specifications
Memory sizeSV-MP010 : 1 GB
SV-MP020 : 2 GB
Supported sampling frequencyMP3 : 8 kHz to 48 kHz
WMA : 22.05 kHz, 32 kHz, 44.1 kHz and 48 kHz
Supported bit-ratesMP3 :  8 kbps to 320 kbps (128 kbps is recommend)WMA :  32 kbps to 192 kbps (96 kbps is recommend)
No. of channels Stereo, 2 channelsFrequency response20 Hz to 20,000 Hz (+0 dB, –6 dB)Output3 mW + 3 mW (16 Ω, Ø3.5 mm (1/8˝) stereo mini jack)Power supplyDC 1.5 V (one alkaline battery)Approximate play times80 hours
Dimensions  (W × H × D)Maximum: 62.5 mm × 28.5 mm × 29.0 mm2 4/9˝ × 1 1/8˝ × 1 1/7˝ Cabinet: 62.0 mm × 28.5 mm × 28.5 mm2 7/16˝ × 1 1/8˝ × 1 1/8˝ Mass51.5  with battery (1.82 oz.)28.0  without battery (0.98 oz.)
• Specifications are subject to change without notice.
• The play time shown depends on operating conditions.
• Mass and dimensions are approximate. 
•  GB means one billion bytes. Useable capacity will be less.
•  This product supports the following character codes. The display may not appear 
correctly with other character codes.
34
RQTT0855
34
LanguageDisplayCharacter codeENGLISHENGLISHUnicode
The play time shown is when the bit rate is 128 kbps (MP3), EQ SETTING (NORMAL), SURROUND (OFF), REMASTER (OFF), volume is 12, the backlight is not used, the ambient temperature is 25°C and supplied alkaline battery is used.

MP010_020_P_2.indd   342006/03/06   14:24:28 
						

							
35
Other information
RQTT0855
35
MaintenanceIf the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
•  Never use alcohol, paint thinner or benzine to clean this unit.
User memo :DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
The serial number of this product can be found inside the battery compartment.Please note it in the space provided below and keep as a permanent record of 
your purchase to aid identification in the event theft.
MODEL NUMBER
SERIAL NUMBER

MP010_020_P_2.indd   352006/03/06   14:24:28 
						

							
RQTT0855-1PM0306KS2036
En
Printed in Taiwan

MP010_020_1P_2.indd   362006/03/28   11:44:11