Panasonic Digital Color Imaging Systems For Function Parameters Dp C354 Operating Instructions

11
 Chapter 2    General Settings
 
Key Operator
No.ParameterCommentsSelective ItemStandard
Setting
0 - 19 00 Print General 
SettingsPrint a list of General Settings.
To cancel printing the parameter setting list, 
press “Stop” and “OK”. 
While processing the cancellation, panel 
operation is denied, and an error beep is 
produced.
The feeding paper(s) will be ejected before 
completing the above cancellation 
operation.
If setting a parameter, an asterisk mark (*) 
will be added before the parameter...

12
 Chapter 2    General Settings
0 - 19 04 Network Settings The setting items increment automatically 
to the next parameter setting when the 
“OK” button is pressed.
General
DHCP Default, TCP/IP Address, TCP/IP 
Subnet Mask, TCP/IP Default Gateway, 
DNS Server Address, Community Name 
(1), Community Name (2), WINS Server 1 
IP, WINS Server 2 IP, Scope ID, IP Filter, IP 
Filter mode, IP Filter Address, 
Printer Domain
Browser
SMB, SMB Master Browser, SMB Device 
Name, SMB Workgroup Name, SMB 
Comment,...

13
 Chapter 2    General Settings
0 - 19 05 Special Paper 
Tray 1Set the paper tray which will not be used as 
the automatic document feeder tray.
Ex:
When you load color paper in Paper Tray 1, 
select “Tra y 1” not to be used for automatic 
tray selection.
zUp to 4 paper trays can be selected for 
exclusion from automatic tray selection.None, Tray 1, 
Tray 2, Tray 3, Tray 4, 
BypassNone
06 Special Paper 
Tray 2None
07 Special Paper 
Tray 3None
08 Special Paper 
Tray 4None
09 Auto Paper Out 
RotateSet...

14
 Chapter 2    General Settings
0 - 19 19 Original Set Beep 
SoundSet whether to sound a confirmation tone 
when the original is placed on the Platen 
Glass.
zThe volume level is the same as for 
Panel Beep Sound.
zWhen “18 Panel Beep Sound” is set to 
“Off”, the machine makes no sound. No, Yes No
20 - 39 20 Orig. Set In ADF 
SoundSet whether to sound a confirmation tone 
when the original is placed on the ADF.
zThe volume level is the same as for 
Panel Beep Sound.
zWhen “18 Panel Beep Sound” is set...

15
 Chapter 2    General Settings
20 - 39 30 MAC Address Display the MAC address (Ethernet 
address).
zThe MAC address is displayed only, but 
cannot be set.
31 Routing Menu 
FunctionSet whether to use the Routing function.
zWhen the optional software (Document 
Distribution System) is installed.No, Yes No
32 Doc. Dist. Server 
NameWhen “29 DNS Server Address” is set to 
“Yes”, and “31 Routing Menu Function” is 
set to “Yes”, enter the name of the 
distribution system routing Server.
The default Port...

16
 Chapter 2    General Settings
20 - 39 37 Auto Reset 
InformationSet whether to display the auto reset guide. No, Yes Yes
38 Pap. Tray Priority 
(B/W)Set the paper tray priority for Black and 
White copy or print job.
S: Optional paper feed unit
C: Paper tray of the main unit
B: Sheet bypassS>C>B, C>S>B C>S>B
39 Pap. Tray Priority 
(Col)Set the paper tray priority for Color copy or 
print job.
S: Optional paper feed unit
C: Paper tray of the main unit
B: Sheet bypassS>C>B, C>S>B C>S>B
40 - 59 40 Fold...

17
 Chapter 2    General Settings
40 - 59 44 Data Deletion of 
HDSet the deletion security level of hard disk 
data for every copy/print job.
zWhen the optional hard disk unit is 
installed, every copy/print job data is 
automatically deleted after each job is 
completed.
For higher security select Medium and 
High, however, the deletion time 
increases with the increase in security 
level, and may take longer to erase the 
data.Basic, Medium, High Basic
45 WINS Server 1 IP Set the IP address of WINS...

18
 Chapter 2    General Settings
60 - 79 61 SMB Device 
NameSet the device name for Microsoft 
Network (SMB).
There is no default value. When the 
machine starts up under the following 
parameter settings “59 SMB” is set to “On”, 
“61 SMB Device Name”, and “62 SMB 
Workgroup Name” are not set, then, 
“Panasonic DP-XXXX and the lower six 
figures of MAC Address” will be 
automatically setup.Up to 15 characters
62 SMB Workgroup 
NameSet the working group name for 
Microsoft Network (SMB).
There is no...

19
 Chapter 2    General Settings
60 - 79 70 Auto Tone Adjust If the colored image tone has deviated, set 
the automatic tone adjustment.

1. Execute this mode to print the calibration 
sheet.
2. Place the calibration sheet on the platen, 
and execute this mode again.Stop, Start Stop
71 Tone Adjust Reset If “70 Auto Tone Adjust” has made the 
original image tone indistinguishable, 
execute this mode to reset the machine to 
the original factory default setting.Stop, Start Stop
73 Administrator 
NameWhen...

20
 Chapter 2    General Settings
Example : Dept. Counter Mode
Registering passwords (department codes) of departments using the Dept. Counter Mode allows you 
to manage the copy, print, and scan counts by department. Up to 1000 departments can be managed.
Let’s take a look at how to register/change passwords (department codes), clear the total counter, print 
a departmental list or report such as a departmental counter list, and change a departmental limit of 
copy count.
zTo use the Dept. Counter Mode,...