Panasonic Digital Color Imaging Systems For Function Parameters Dp C354 Operating Instructions

							11
 Chapter 2    General Settings
 
Key Operator
No.ParameterCommentsSelective ItemStandard
Setting
0 - 19 00 Print General 
SettingsPrint a list of General Settings.
To cancel printing the parameter setting list, 
press “Stop” and “OK”. 
While processing the cancellation, panel 
operation is denied, and an error beep is 
produced.
The feeding paper(s) will be ejected before 
completing the above cancellation 
operation.
If setting a parameter, an asterisk mark (*) 
will be added before the parameter number.Stop, Start Start
01 Paper Size Set the paper size, and media type for 
Paper Trays 1-4.
Select the Paper Tray and the paper size, 
and then select “Change Size / Media”.
zOnly 8.5x11 , A4 , B5  is selectable 
for Tray 1.
zTo change the preset paper size used in 
the Paper Tray, consult with the 
authorized Panasonic dealer. “Change Size”
11x17 , Legal , 
8.5x11 , 8.5x11 , 
5.5x8.5 , A3 , 
B4 , A4 , A4 , 
B5 , B5 , A5 , 
8x13 , 8.5x13
Select the paper type. “Change Type”
Plain, Glossy, 
Recycled
02 A4R/A5 Size 
SelectionSet the smallest paper size that will be fed 
to the Sheet Bypass.A4R, A5 A4R 
						

							12
 Chapter 2    General Settings
0 - 19 04 Network Settings The setting items increment automatically 
to the next parameter setting when the 
“OK” button is pressed.
General
DHCP Default, TCP/IP Address, TCP/IP 
Subnet Mask, TCP/IP Default Gateway, 
DNS Server Address, Community Name 
(1), Community Name (2), WINS Server 1 
IP, WINS Server 2 IP, Scope ID, IP Filter, IP 
Filter mode, IP Filter Address, 
Printer Domain
Browser
SMB, SMB Master Browser, SMB Device 
Name, SMB Workgroup Name, SMB 
Comment, Bonjour (Only PS), Bonjour 
Name (Only PS), NetWare, NetWare 
Frame Type,
Selected Frame Type, NetWare Mode, 
NetWare Printer Name, Print Server Name,
Print Server Password, Job Polling Time,
Bindery Mode, File Server Name 1,
File Server Name 2, File Server Name 3,
File Server Name 4, File Server Name 5, 
File Server Name 6, File Server Name 7, 
File Server Name 8, NDS Tree, 
NDS Context, Print Server Name 1, 
Print Server Name 2, Print Server Name 3, 
Print Server Name 4, Print Server Name 5, 
Print Server Name 6, Print Server Name 7, 
Print Server Name 8, Job Time Out
EMAIL
Email Address, SMTP Server Name, SMTP 
Server IP, SMTP Authentication, SMTP 
AUTH Name, SMTP AUTH Password,
POP Server Name, POP Server IP, POP 
User Name, POP Password, POP before 
SMTP, APOP Authentication
LDAP
LDAP Server Name, LDAP Server IP,
LDAP User Name, LDAP Password, 
LDAP Search Base
zLDAP requires a FAX, IFAX, or Scanner 
option to be installed.
Key Operator
No.ParameterCommentsSelective ItemStandard
Setting 
						

							13
 Chapter 2    General Settings
0 - 19 05 Special Paper 
Tray 1Set the paper tray which will not be used as 
the automatic document feeder tray.
Ex:
When you load color paper in Paper Tray 1, 
select “Tra y 1” not to be used for automatic 
tray selection.
zUp to 4 paper trays can be selected for 
exclusion from automatic tray selection.None, Tray 1, 
Tray 2, Tray 3, Tray 4, 
BypassNone
06 Special Paper 
Tray 2None
07 Special Paper 
Tray 3None
08 Special Paper 
Tray 4None
09 Auto Paper Out 
RotateSet whether to rotate the image, and print 
when the selected paper tray is empty.
Ex:
Printing on letter paper when there is no 
letter size paperOff, On Off
10 Copy Output Tray Set an output tray for the copier function.
zOuter is available for selection when the 
optional Paper Transport Unit is installed.Inner, Outer Inner
11 Printer Output 
TraySet an output tray for the printer function.
zOuter is available for selection when the 
optional Paper Transport Unit is installed.Inner, Outer Inner
12 Fax/Email Output 
Tray
Set an output tray for the Fax/Email function.
zOuter is available for selection when the 
optional Paper Transport Unit is installed.Inner, Outer Inner
13 Auto Reset Time If you do not select any key within a given 
time period, the touch panel goes back to 
the initial screen of the current active 
function automatically.None, 30 sec., 
1 min., 2 min., 
3 min., 4 min.1 min.
14 Power Save Mode 
TimerIf you do not select any key within a given 
time period, the machine is switched to 
power save mode automatically. 1 to 240 min. 15 min.
15 Sleep Timer If you do not select any key within a given 
time period, the machine is switched to 
sleep mode automatically. None, 
1 to 240 min.22 min.
16 Language Sel. 
PrioritySet whether to give priority to the display 
language.Off, On Off
17 Language Default Set the display language.
If the language is changed, the system 
automatically returns to the initial function 
setup screen.English, 
C. French, 
SpanishEnglish
18 Panel Beep 
SoundSet the volume of Beep Sound when the 
panel is selected.Off, Soft, Loud Soft
Key Operator
No.ParameterCommentsSelective ItemStandard
Setting 
						

							14
 Chapter 2    General Settings
0 - 19 19 Original Set Beep 
SoundSet whether to sound a confirmation tone 
when the original is placed on the Platen 
Glass.
zThe volume level is the same as for 
Panel Beep Sound.
zWhen “18 Panel Beep Sound” is set to 
“Off”, the machine makes no sound. No, Yes No
20 - 39 20 Orig. Set In ADF 
SoundSet whether to sound a confirmation tone 
when the original is placed on the ADF.
zThe volume level is the same as for 
Panel Beep Sound.
zWhen “18 Panel Beep Sound” is set to 
“Off”, the machine makes no sound. No, Yes Yes
21 Dept. Counter 
ModeSet whether to display departmental
counters, limit counters, and total counters.z
Consult with the authorized Panasonic 
dealer on how to use this item. 
22 Date Time Setting Set the date and the time.Month, Day, Year, Time
23 Weekly TimerSet the weekly On/Off timer using the 
Keypad of the machine. At the selected time, 
the machine will switch to/from sleep mode.Each day of the 
week.Off
24 Daylight Time Set Daylight Time According to your local 
regulation.
•No
Daylight Time is not applied.
• MAR 2nd
From 2:00 AM on the 2nd Sunday in 
March to 2:00 AM on the 1st Sunday in 
November.
•APR 1st
From 2:00 AM on the 1st Sunday in April 
to 2:00 AM on the Last Sunday in 
October.
zThis setting is applied from March 2007 
year. You select “MAR 2nd” in 2006, but 
the daylight time will automatically set to 
“APR 1st”.No, MAR 2nd, 
APR 1stMAR 2nd
25 DHCP Default Select “Yes” when your network                  
environment is based on DHCP Server.
When using this machine as a network 
shared printer, select “No”, and set “26 
TCP/IP Address”, “27 TCP/IP Subnet 
Mask”, and “28 TCP/IP Default Gateway”.No, Yes Yes
26 TCP/IP Address Set the IP address. 3-digit x 4 0. 0. 0. 0
27
TCP/IP Subnet MaskSet the subnet mask. 3-digit x 4 0. 0. 0. 0
28 TCP/IP Default 
GatewaySet the default gateway. 3-digit x 4 0. 0. 0. 0
29 DNS Server 
AddressSelect “Yes”, and set the DNS Server 
address (when using the optional Internet 
Fax/Email function).No, Yes Yes
No. 25 to 29
After setting any of these parameters, turn the 
machine’s power switch Off, and then On again.
Key Operator
No.ParameterCommentsSelective ItemStandard
Setting 
						

							15
 Chapter 2    General Settings
20 - 39 30 MAC Address Display the MAC address (Ethernet 
address).
zThe MAC address is displayed only, but 
cannot be set.
31 Routing Menu 
FunctionSet whether to use the Routing function.
zWhen the optional software (Document 
Distribution System) is installed.No, Yes No
32 Doc. Dist. Server 
NameWhen “29 DNS Server Address” is set to 
“Yes”, and “31 Routing Menu Function” is 
set to “Yes”, enter the name of the 
distribution system routing Server.
The default Port Number is changed by 
setting SSL.
zWhen the optional software (Document 
Distribution System) is installed.Up to 60 characters
“SSL”
Off:8083
On:8084
33 Doc. Dist. Server 
IPWhen “29 DNS Server Address” is set to 
“No” and “31 Routing Menu Function” is 
set to “Yes”, enter the IP address of the 
distribution system routing Server.
The default Port Number is changed by 
setting SSL. 
zWhen the optional software (Document 
Distribution System) is installed.
zWhen the optional Hard Disk is installed.3 digits x 4
“SSL”
Off:8083
On:80840. 0. 0. 0.
34 Hard Disk 
InitializeSet the HDD format/deletion.
When selecting “Deletion”, set the deletion 
security level of hard disk data. During the 
deletion time, the machine cannot be used.
•Stop
    Deletion is not executed.
•Medium
    Deletion is completed within 2 hours.
•High
    Deletion is completed within 3 hours.
zWhen the optional Hard Disk is installed.Format : Stop, Start
Deletion : Stop, 
Medium,
HighFormat
(Stop)
35 Hard Disk Error 
CheckSet the hard disk error check.
zNot required in copying mode, but 
needed when installing options with 
advanced functions.
zWhen the optional Hard Disk is installed.Stop, Start  Start
36 Address Book 
Group IDSet the Address Book Group ID. 0 to 99 0
Key Operator
No.ParameterCommentsSelective ItemStandard
Setting 
						

							16
 Chapter 2    General Settings
20 - 39 37 Auto Reset 
InformationSet whether to display the auto reset guide. No, Yes Yes
38 Pap. Tray Priority 
(B/W)Set the paper tray priority for Black and 
White copy or print job.
S: Optional paper feed unit
C: Paper tray of the main unit
B: Sheet bypassS>C>B, C>S>B C>S>B
39 Pap. Tray Priority 
(Col)Set the paper tray priority for Color copy or 
print job.
S: Optional paper feed unit
C: Paper tray of the main unit
B: Sheet bypassS>C>B, C>S>B C>S>B
40 - 59 40 Fold Position (A3/
LDR)Set the binding margin for booklet copy.
(A3/Ledger).-4.0 to +4.0 mm 0.0
41 Fold Position (B4) Set the binding margin for booklet copy.
(B4).-4.0 to +4.0 mm 0.0
42 Fold Position (A4/
LTR-R)Set the binding margin for booklet copy.
(A4/Letter-R).-4.0 to +4.0 mm 0.0
Key Operator
No.ParameterCommentsSelective ItemStandard
Setting
A3 / Ledger(11x17)
B4
A4 / Letter-R(8.5x11) 
						

							17
 Chapter 2    General Settings
40 - 59 44 Data Deletion of 
HDSet the deletion security level of hard disk 
data for every copy/print job.
zWhen the optional hard disk unit is 
installed, every copy/print job data is 
automatically deleted after each job is 
completed.
For higher security select Medium and 
High, however, the deletion time 
increases with the increase in security 
level, and may take longer to erase the 
data.Basic, Medium, High Basic
45 WINS Server 1 IP Set the IP address of WINS Server 1. 3 digits x 4 0. 0. 0. 0.
46 WINS Server 2 IP Set the IP address of WINS Server 2. 3 digits x 4 0. 0. 0. 0.
47 Scope ID Set the Net Bios Scope ID. Up to 223 characters
48 IP Filter Set whether the IP filter is to provide 
security for network functions such as 
printer or scanner.Off, On Off
49 IP Filter Mode Set whether the registered “50 IP Filter 
Address” is allowed or denied for network 
functions.Allow, Deny Allow
50 IP Filter Address Set the IP filter address.
Up to 4 addresses can be set.
zWhen setting only one IP filter address, 
input the same IP address for both “Start 
Address” and “End Address”.3 digits x 4 0. 0. 0. 0.
51 Community Name 
(1)Set the SNMP community name (1). Up to 15 characters public
52 Community Name 
(2)Set the SNMP community name (2). Up to 15 characters public
54 SysContact Set the system management name. Up to 31 characters
55 SysName Set the system name. Up to 31 characters Panasonic 
DP-XXXX
56 SysLocation Set the system installation location. Up to 31 characters
59 SMB Set whether to use the machine on the 
Microsoft Network (SMB).Off, On Off
60 - 79 60 SMB Master 
BrowserSet whether to use the SMB Master 
Browser.Off, On Off
 No. 45 to 60
After setting any of these parameters,  turn the 
machine’s power switch Off, and then On again.
Key Operator
No.ParameterCommentsSelective ItemStandard
Setting 
						

							18
 Chapter 2    General Settings
60 - 79 61 SMB Device 
NameSet the device name for Microsoft 
Network (SMB).
There is no default value. When the 
machine starts up under the following 
parameter settings “59 SMB” is set to “On”, 
“61 SMB Device Name”, and “62 SMB 
Workgroup Name” are not set, then, 
“Panasonic DP-XXXX and the lower six 
figures of MAC Address” will be 
automatically setup.Up to 15 characters
62 SMB Workgroup 
NameSet the working group name for 
Microsoft Network (SMB).
There is no default value. When the 
machine starts up under the following 
parameter settings “59 SMB” is set to “On”, 
“61 SMB Device Name”, and “62 SMB 
Workgroup Name” are not set, then,  
“DPCL-PRINTER” will be automatically 
setup.Up to 15 characters
63 SMB Comment Set comments about the machine 
used for Microsoft Network (SMB).Up to 48 characters
64 Bonjour Set the Bonjour.
zWhen the optional Printer Controller 
Module (for Adobe
® PostScript® 3™ ) is 
installed.
There is no default value. When the 
machine starts up, and parameter “64 
Bonjour” is set to “On”,  then, “Panasonic 
DP-XXXX and the lower six figures of MAC 
Address” will be automatically setup.Off, On Off
65 Bonjour Name Set the name of Bonjour.
zWhen the optional Printer Controller 
Module (for Adobe
® PostScript® 3™ ) is 
installed.
There is no default value. When the 
machine starts up, and parameter “64 
Bonjour” is set to “On”,  then, “Panasonic 
DP-XXXX and the lower six figures of MAC 
Address” will be automatically setup.Up to 31 characters
66 IPv6 Set this parameter to “On” when using 
the machine for IPv6.
zFor details about setting IPv6, refer to 
Embedded Web Server in the 
Document Management System (For 
Embedded Web Launcher, and Web 
Server) on the provided CD-ROM.Off, On Off
No. 61 to 66
After setting any of these parameters, turn the 
machine’s power switch Off, and then On again.
Key Operator
No.ParameterCommentsSelective ItemStandard
Setting 
						

							19
 Chapter 2    General Settings
60 - 79 70 Auto Tone Adjust If the colored image tone has deviated, set 
the automatic tone adjustment.

1. Execute this mode to print the calibration 
sheet.
2. Place the calibration sheet on the platen, 
and execute this mode again.Stop, Start Stop
71 Tone Adjust Reset If “70 Auto Tone Adjust” has made the 
original image tone indistinguishable, 
execute this mode to reset the machine to 
the original factory default setting.Stop, Start Stop
73 Administrator 
NameWhen “75 User Authentication” is set to 
“On”, and a Local Machine is selected as 
domain, set administrator’s name and, 
password for authentication.Up to 40 characters
74 Authentication 
MethodWhen “75 User Authentication” is set to 
“On”, set the authentication method.NTLM, Clr Text NTLM
75 User 
AuthenticationSet whether to use User Authentication, 
and then select for which functions.Copy, Fax, Print, 
Scan
(Off, On)
76 ID Timeout When “75 User Authentication” is set to 
“On”, set at what phase the machine will 
require the authentication.Auto Rst, EveryJob Auto Rst
77 Logon Attempts When “75 User Authentication” is set to 
“On”, set the number of permitted logon 
attempts. (Set “0” for unlimited attempts.)0 to 9 0
78
User Auth. DomainWhen “75 User Authentication” is set to 
“On”, set the domain for authentication.
The default Port Number is changed by the 
SSL setting.No. 00 to 09
“SSL”
Off:389
On:636
79 Lockout Time When “75 User Authentication” is set to 
“On”, set the lockout time.
If you failed to logon during specified times, 
you cannot logon again during the lockout 
time.1 to 60 min. 5 min.
80 - 89 85 Key Operator 
PasswordSet the 8-digit key operator password. Up to 8 characters
86 HD Drive Lock 
SettingsSet the 32-digit HD Drive Lock password.
zWhen the Set Drive Lock is selected.
The machine requires rebooting, and the 
“Change Lock Password”, and “Release 
Drive Lock Password” tasks must be 
carried out.Set Hard Drive Lock Set Hard 
Drive Lock
Key Operator
No.ParameterCommentsSelective ItemStandard
Setting 
						

							20
 Chapter 2    General Settings
Example : Dept. Counter Mode
Registering passwords (department codes) of departments using the Dept. Counter Mode allows you 
to manage the copy, print, and scan counts by department. Up to 1000 departments can be managed.
Let’s take a look at how to register/change passwords (department codes), clear the total counter, print 
a departmental list or report such as a departmental counter list, and change a departmental limit of 
copy count.
zTo use the Dept. Counter Mode, a special service setting is required. Contact your authorized Panasonic 
dealer.
zWhen the departmental counter function is enabled, the password (department code) entry screen appears on 
the touch panel display. If you do not enter the password (department code), you cannot use the Copy, Fax, 
Scan and Print function. 
1Press the Function key.
zThe password (department code) entry 
screen appears on the touch panel display. 
Press the Function key on the Control 
Panel without entering any code.
2Select “General Settings”.
3Select “5-9”.
4Select “09 Key Operator Mode”.