Panasonic Digital Device Display Pt 50lcx63 Operating Instructions
Have a look at the manual Panasonic Digital Device Display Pt 50lcx63 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31 Basic Operation EXIT Notes: • Some channels with very weak signals may be locked into memory. If desired, these channels can be deleted man u al ly using the Manual Program feature. • Auto scan must be done when you select the input signal for the fi rst time or whenever you change the antenna confi guration. Tu n i n g c h a n n e l s Press to select Auto Scan item. Press to start Auto Scan. Notes: • If Cable Only, Antenna Only or Antenna/Cable is selected and DCM (Digital Cable Module) is not in, the Auto Scan will perform Scan All. • If Cable Only is selected and DCM is in, Auto scan will be skipped. • If Cable/Antenna is selected and DCM is in, Antenna (B) Analog & Digital Auto scan will be performed. Auto Scan - To automatically Scan All available channels, Antenna (A) Analog, Antenna (A) Analog & Digital, Antenna (B) Analog and Antenna (B) Analog & Digital. CH CH VOL VOL OK CH CH VOL VOL OK 2 3Program Channel Input Setup Auto Scan Manual Program Signal MeterScan All Antenna (A) Analog Antenna (A) Analog & Digital Antenna (B) Analog Antenna (B) Analog & DigitalSELECT OK EXIT MENU to return Press to start Auto Scan. CH CH VOL VOL OK5 1 Select Auto Scan and press OK to enter the sub menu. Press to exit menu.4
32For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo Use this procedure when changing setting of receiving channels or changing the channel dis play. To add or delete channels from either channel list (A/B) manually. Manual channel setting Tu n i n g c h a n n e l s Press MENU to display the Main Menu screen. Press to select Manual Program. Press to enter sub-menu. Continued on the next page. CH CH VOL VOL OK Press to select Antenna (A) or Antenna (B). CH CH VOL VOL OKPress to select RF Input. CH CH VOL VOL OKPress to select Setup icon. Press to display the options in the Setup menu. Press to display the Program Channel menu. Press to select Program CH icon . 1 CH CH VOL VOL OK2 3 Program Channel Input Setup Auto Scan Manual Program Signal MeterRF InputAntenna (A) Channel AddA:2 Channel DelA:66SELECT OK EXIT MENU to return Program Channel Input Setup Auto Scan Manual Program Signal MeterRF InputAntenna (A) Channel AddA:2 Channel DelA:66SELECT OK CHANGE EXIT MENU to return 4 Press to set. CH CH VOL VOL OK5 POWER SAP LIGHT MENU 123 456 78 09 EXIT CH CH VOL VOL R-TUNE PIP MIN REW FREEZE TV/VCR PIP SPLIT MOVE SWAPPIP CH DVD/VCR CHSEARCH OPEN/CLOSE PLAY PA U S E S T O P R E CPIP MAX FF PROG TV/VIDEOA - ANTENNA - B TV VCR DVD DBS RCVR CBL AUX OK MUTEASPECTBBERECALL RF Input can only be selected when both Antenna (A) and Antenna (B) are connected.
33 Basic Operation 6 Repeat steps 6 to continue adding or deleting channels.Press to add channels to memory. Press to exit menu. Note: Some channels with very weak signals may be locked into memory. If desired, these channels can be deleted manually using the Manual Program feature. 7 8 To add channel To delete channel Press to select Channel Add.CH CH VOL VOL OK CH CH VOL VOL OK Press to select Channel Del.CH CH VOL VOL OK Press to delete channels from memory. Press to select CH.CH CH VOL VOL OK EXIT Program Channel Input Setup Auto Scan Manual Program Signal MeterRF InputAntenna (A) Channel AddA:9 Channel DelA:3 Press OK to add SELECT OK CHANGE EXIT MENU to return Program Channel Input Setup Auto Scan Manual Program Signal MeterRF InputAntenna (A) Channel AddA:9 Channel DelA:3 Press OK to delete SELECT OK CHANGE EXIT MENU to return Tu n i n g c h a n n e l s Press to select CH.
34For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo Operation can be done from the Device Display. Press to select the desired volume level. Press to select the desired channel. Press to turn the Device Display on. Press to operate the Device Display with the Remote Control. 1 2 3 4 Notes: • The channel number and volume level are stored even after the Device Display is turned off. • Power consumption can be reduced if the volume level is lowered. POWER TV Or Remote Control SensorPOWER button/ POWER indicator Volume up(+) / down(–) buttons Channel up / down buttons 26 Note: Refer to “Direct Tuning Method”. (See next page.) Device display operation 123 456 78 09 CH CH VOL VOL OK CH CH VOL VOL OK POWER SAP LIGHT MENU 123 456 78 09 EXIT CH CH VOL VOL R-TUNE PIP MIN REW FREEZE TV/VCR PIP SPLIT MOVE SWAPPIP CH DVD/VCR CHSEARCH OPEN/CLOSE PLAY PA U S E S T O P R E CPIP MAX FF PROG TV/VIDEOA - ANTENNA - B TV VCR DVD DBS RCVR CBL AUX OK MUTEASPECTBBERECALL Note: Refer to “Channel Up/Down Tuning”. (See page 36.) Use number keys
35 Basic Operation Channel and Program Tuning Channel and Program tuning in digital television differs from conventional television. With DTV, many programs can exist within a single 6 MHz channel. These channels behave as sub-channels within a single channel. When tuning to a digital channel, the Device Display will also tune to a program and will indicate the channel and program in the on-screen Channel Banner display. In order to select channels properly, Auto Scan must be performed (refer to pages 30-31). Follow the procedure below to directly enter the channel number using the Remote Control number keys. 1 1 Press the number keys on the Remote Control to enter the Channel number. Press OK. The following is an example of tuning to channel 15. If tuning a digital channel and your channel contains more than one program, press PROG and enter the program (1, 2, 3 etc.) using the number keys. Press OK. The following is an example of tuning to channel 15-1. Direct Tuning Example Step Action Channel Banner Display 1Press 1 1 2Press 5 15 3Press - 15- 4Press 1 15-1 5Press OK 15-1 Direct Tuning Method 123 456 78 09 PROG 123 456 78 09 CH CH VOL VOL OK CH CH VOL VOL OK Select analog channel 2 Select digital channel 2 4 123 456 78 09 3 Step Action Channel Banner Display 1Press 1 1 2Press 5 15 3Press OK 15 Direct Tuning Example Device display operation
36For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo Press to select the desired channel. Or CH CH VOL VOL OK Rapid Tuning A - ANTENNA - B Antenna Input (A/B) Tuning R-TUNE Remote Control Device display Unit Channel Up/Down Tuning A /B button switches between the two RF antenna inputs, if connected. The last tuned channel in memory of the respective RF input is displayed. Press to switch to previously viewed channel, Photo Viewer or input modes. Channel Up/Down Tuning (CH ▲ or CH ▼ buttons) - Tunes to the next or previous available channel or program. Channel Up/Down tuning depends upon the surfi ng mode (see page 49) you have set in the Channel menu. Switches between the current and last channel or program. Video 1* Video 2* Video 3* Comp 1* Comp 2* HDMI* RGB 2* RGB 1* Comp 3* *If SKIP is set as the Input Label setting of Channel Caption, the mode will not be changed. (See page 69.) While an input other than Tuner is displayed, you can change the input mode with the units CH Up/Down buttons. (See diagram, right.) Press to select the desired channel. Device display operation POWER SAP LIGHT MENU 123 456 78 09 EXIT CH CH VOL VOL R-TUNE PIP MIN REW FREEZE TV/VCR PIP SPLIT MOVE SWAPPIP CH DVD/VCR CHSEARCH OPEN/CLOSE PLAY PA U S E S T O P R E CPIP MAX FF PROG TV/VIDEOA - ANTENNA - B TV VCR DVD DBS RCVR CBL AUX OK MUTEASPECTBBERECALL
37 Basic Operation The input mode changes each time this button is pressed. Video 1 Signal of source connected to INPUT 1 is displayed. Video 2 Signal of source connected to INPUT 2 is displayed. Video 3 Signal of source connected to INPUT 3 is displayed. Comp 1 Signal of source connected to COMPONENT VIDEO INPUT 1 is displayed. Comp 2 Signal of source connected to COMPONENT VIDEO INPUT 2 is displayed. Comp 3 Signal of source connected to COMPONENT VIDEO INPUT 3 is displayed. RGB 1 Signal of source connected to RGB IN 1 is displayed. RGB 2 Signal of source connected to RGB IN 2 is displayed. HDMI Signal of source connected to HDMI IN is displayed. TV Video 1* Video 2* Video 3* Comp 1* HDMI* RGB 2* RGB 1* Comp 3* Comp 2* Card input mode (Photo Viewer) is selected. The input source for picture signals can be changed by pressing TV/VIDEO, SD on the Remote Control or CH up/down on the unit. Changing the input signal Device display operation * If SKIP is set as the Input Label setting of Channel Caption, the mode will not be changed. (See page 69.) * 1Changing input is only possible if Cable/Antenna is set as the Input Set setting. Remote Control Device display Unit Antenna A Antenna B*1 TV By pressing Channel Up/Down buttons together, you can switch between TV mode and an outside input source. *2Input changes to the fi rst outside input source of the Input Label not set to SKIP. For example, if Video 1 is set to SKIP, input is changed to Video 2. See the chart, below (except for Photo mode). Video 1*2 Photo (Photo Viewer) Signal of source connected to CARD SLOT is displayed.While Photo Viewer is displayed, the channel or outside input source last viewed is redisplayed.
38For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo A:135-99999 ABC Del FAV480i FULLVIVID Unit Status display Channel Banner: Minimized Press Channel UP/DOWN or TV/ VIDEO to minimize the channel banner display. It will display the antenna input, channel number, and the station identifi cation (if available). Channel Banner: Maximized Press RECALL to maximize the channel banner display. While it is displayed, you can add a channel to or delete a channel from the Favorite channel list. Device display operation Continued on the next page. A:135-99999 ABCAntenna designation / Channel Number Channel Caption A:135-99999 ABC Del FAVTV-PG13 CCSAP480i FULLVIVID 14A:4 PBS Add/Delete Favorite Channel IndicatorRating indication AspectPicture ModeAntenna designation and PIP/SPLIT Channel Number PIP/SPLIT Channel CaptionTime remaining in sleep timer Antenna designation and Channel Number / Channel Caption Closed Caption / SAP POWER SAP LIGHT MENU 123 456 78 09 EXIT CH CH VOL VOL R-TUNE PIP MIN REW FREEZE TV/VCR PIP SPLIT MOVE SWAPPIP CH DVD/VCR CHSEARCH OPEN/CLOSE PLAY PA U S E S T O P R E CPIP MAX FF PROG TV/VIDEOA - ANTENNA - B TV VCR DVD DBS RCVR CBL AUX OK MUTEASPECTBBERECALL Press the RECALL, Channel UP/DOWN or TV/ VIDEO button, except when the MENU screen is dis played, to display current unit status information. CH CH VOL VOL OK Or Or
39 Basic Operation Auto shut off To extend lamp life, if there is no signal to the set’s tuner for 5 minutes, the lamp will shut off automatically. FREEZEInvalid operation notifi cation If an invalid operation is attempted, the mark shown right is displayed. Example: Invalid operation was tried during FREEZE mode. Device display operation Add FAV / Del FAV feature Tune to the desired channel to be added or deleted. This feature lets you add channels to or delete channels from the Favorite channel list. To add a favorite channel1 2 A:135-99999 ABC Del FAV480i FULLVIVID A:135-99998 ABC Add FAV480i FULLVIVID Press OK to add the channel. To delete a favorite channel Press OK to delete the channel. Press RECALL while viewing an unregistered channel to display Add FAV in the CH Banner. Press RECALL while viewing a registered channel to display Del FAV in the CH Banner. Note: Please refer to page 49 for more about the Favorite Channel feature.
40For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. The aspect mode changes each time ASPECT is pressed. Notes: • When a 1080i or 720p signal is being received, the mode is set to FULL, and aspect switching is not possible. • When input mode is CARD, the mode is set to 4:3, and aspect switching is not possible. FULL Notes: • However, if the mode selected does not match the aspect ratio of the input signal, the original picture quality may be affected. • If using this Device Display in places, such as cafes or hotels, with the aim of displaying programs for a commercial purpose or for public presentation, please note that by using the aspect ratio (16:9) selection function to change the aspect ratio, you may be infringing on the rights of the original copyright owner of that program under copyright protection laws. • If a 4:3 picture is projected in wide screen, distortion may occur around the edges so that part of the picture may no longer be visible. We recommend viewing in 4:3 mode so you can enjoy the picture as it was intended to be seen.• When XGA and Mac 19 signal is input, the aspect will be 4:3 and FULL only. ASPECT Con trols • During PC input, the mode switches between 4:3, FULL and TRUE only. • When a 480p signal is being received, the mode switches between 4:3, ZOOM, and FULL only. 4:3ZOOMFULL 4:3FULLTRUE 4:3FULL 4:3FULL JUSTZOOM POWER SAP LIGHT MENU 123 456 78 09 EXIT CH CH VOL VOL R-TUNE PIP MIN REW FREEZE TV/VCR PIP SPLIT MOVE SWAPPIP CH DVD/VCR CHSEARCH OPEN/CLOSE PLAY PA U S E S T O P R E CPIP MAX FF PROG TV/VIDEOA - ANTENNA - B TV VCR DVD DBS RCVR CBL AUX OK MUTEASPECTBBERECALL