Panasonic Digital Device Display Pt 50lcx63 Operating Instructions
Have a look at the manual Panasonic Digital Device Display Pt 50lcx63 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
41 Basic Operation Notes: • The screen size changes if ID1 is detected. (P. 75) • When ASPECT is in ZOOM mode, PIP feature cannot be used. (PP. 44-45) ASPECT Controls Mode Picture Ex pla na tion 4:3 4:3 3 4 4:3 will display a 4:3 picture at its stand ard 4:3 size. JUST JUST 9 16 JUST mode will display a 4:3 picture at max i mum size but with aspect correction applied to the center of the screen so that elongation is only apparent at the left and right edges of the screen. The size of the picture will depend on the original signal. ZOOM ZOOM 16 9 ZOOM mode magnifi es the central section of the picture. FULL FULL 16 9 FULL will display the picture at its maximum size but with sight elongation. TRUE TRUE 3 4 You can reduce the image and adjust it to the original image quality. (Except XGA)
42For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo Press this button to mute the sound. Press again to reactivate sound. Sound is also reactivated when power is turned off or volume level is changed. Sound mute Useful when answering the phone or receiving un ex pect ed visitors E T U M Note: The audio output from AV OUT is not muted. Mute / Freeze / SAP Projection can be switched between a frozen (still) picture and a moving picture each time FREEZE on the Remote Control unit is pressed. Press FREEZE again to resume motion. Freezing pictures E Z E E R F Note: The video output from AV OUT is not frozen. FREEZE TV/VCR Press SAP to select the next audio track (if available) when receiving a digital channel. SAP In digital mode, Continued on the next page. Select Audio Mode for TV Viewing Audio Track 1 of 1 (English) POWER SAP LIGHT MENU 123 456 78 09 EXIT CH CH VOL VOL R-TUNE PIP MIN REW FREEZE TV/VCR PIP SPLIT MOVE SWAPPIP CH DVD/VCR CHSEARCH OPEN/CLOSE PLAY PA U S E S T O P R E CPIP MAX FF PROG TV/VIDEOA - ANTENNA - B TV VCR DVD DBS RCVR CBL AUX OK MUTEASPECTBBERECALL
43 Basic Operation SAP Mute / Freeze / SAP In analog mode, The following are possible broadcast types with their accompanying on-screen displays. The signal being received is indicated with a “ ” mark while the se lect ed audio mode is indicated with an arrow. MTS Stereo and SAP broadcast Multi-channel Television Sound Stereo (main lan guage) and Secondary Au dio Program (sub lan guage) broad casts are both be ing received si mul ta ne ous ly. Select the STEREO or SAP audio mode. MTS Stereo broadcast Multi-channel Television Sound Stereo broadcast. Se lect STEREO audio mode. • If stereo broadcast is weak and the display fl ickers, select MONO audio mode for pos si bly better results. SAP broadcast Secondary Audio Program (sub language.) Select SAP audio mode for the sub language. MONO broadcast Normal monaural sound broadcast. Receivable Broadcast Types STEREO SAP MONO STEREO SAP MONO STEREO SAP MONO STEREO SAP MONO Press SAP button to select the desired audio mode as described below. (Arrow shows selection.) • Each press of SAP button will change the audio mode as shown below. • “SAP” is selected with fi rst press of SAP button. Example: Press SAPPress SAP STEREO SAP MONOSTEREO SAP MONOSTEREO SAP MONO Press SAP
44For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo A:5 This unit includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live broadcasts at the same time with or without an external video source, such as a VCR, cable box, etc. Display PIP screen PIPPress to split. (The previously selected screen appears on the Main.) Returning to one screen Press to return. Main screen (Main pic ture) PIP screen (Sub picture) Notes: • Sound from the Main screen is output from the speak ers on the Device Display set. • In PIP mode, the Main screen signal is output from the rear monitor output terminal. • Because Main and PIP screens are processed by individual circuits, image quality may vary slightly. • PIP mode returns to single screen when the Device Display is turned off. • Essentially, the Main and PIP screens cannot display the same picture at the same time. • Only the Analog programming from Antenna (A) and video inputs signal can be viewed in the PIP screen function. • A component signal cannot be displayed on a PIP screen. Thus, when a component signal is displayed on the Main screen, the SWAP button becomes invalid. • When ASPECT is in ZOOM mode, PIP feature cannot be used. (PP. 40-41) • When the RGB, HDMI or Card (Photo Viewer) input mode is selected, PIP feature cannot be used. (P. 37) • The signal input from Antenna (B) can be displayed on the Main screen only. (It cannot be displayed as a PIP screen.) Picture in Picture (PIP) Screen Select desired input mode of the PIP screen TV/VIDEOPress to select the desired input mode. TV Video 1* Video 2* Video 3* PIP POWER SAP LIGHT MENU 123 456 78 09 EXIT CH CH VOL VOL R-TUNE PIP MIN REW FREEZE TV/VCR PIP SPLIT MOVE SWAPPIP CH DVD/VCR CHSEARCH OPEN/CLOSE PLAY PA U S E S T O P R E CPIP MAX FF PROG TV/VIDEOA - ANTENNA - B TV VCR DVD DBS RCVR CBL AUX OK MUTEASPECTBBERECALL *If SKIP is set as the Input Label setting of Channel Caption, the mode will not be changed. (See page 69.)
45 Basic Operation MOVE Swapping Main and PIP screens Press to swap.SWAPPIP CH DVD/VCR CH Changing the channel of the PIP screen Move PIP screen You can move the PIP screen to four po si tions. Press re peat ed ly to select PIP position. A:5 A:6 A:5A:3 A:5 A:3 Press to select the desired channel. Example: During Main screen NORMALExample: During Main screen NORMAL Selecting the screen size for PIP screen You can choose PIP screen size of 3 magnifi cations. PIP MIN REW Press to large PIP screen size. Initial size 12 3 Initial position 2 1 Note: The last size chosen is saved and will not be erased even if the power is turned off. Note: The last position chosen is saved and will not be erased even if the power is turned off. Picture in Pic ture (PIP) Screen PIP MAX FFInitial Position 1st Press 2nd Press 3rd PressPress to small PIP screen size.
46For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo Notes: • Sound from the Left screen is output from the speakers on the Device Display set. • When the screen is split, signals of the Left screen are output from the rear monitor output terminal. • The left and right screens are processed by individual circuits and, therefore, may vary in image quality. • Split screen returns to single screen when the Device Display is turned off. • The right and left screens essentially cannot display the same picture at the same time. • A split screen which includes an RGB IN signal is fi xed as SPLIT SCREEN 4:3. (Example: RGB input is shown right.) • CARD and HDMI input screen cannot be displayed using the Split Screen function. • The signal input from Antenna (B) is displayed on the Left screen only. (It cannot be displayed on the Right screen.) Splitting the screen Press to split. (The previously selected screen appears on the left.) Returning to one screen Press to return. Selecting the screen aspect for split screen. Press to select modes. 4:3 A:5 FULL SPLIT SCREEN 4:3 SPLIT SCREEN 4:3 (Example: RGB input) 4:3 Left screen (Main pic ture) Right screen (Sub pic ture) SPLIT SCREEN FULL Split screen SPLIT SPLITPOWER SAP LIGHT MENU 123 456 78 09 EXIT CH CH VOL VOL R-TUNE PIP MIN REW FREEZE TV/VCR PIP SPLIT MOVE SWAPPIP CH DVD/VCR CHSEARCH OPEN/CLOSE PLAY PA U S E S T O P R E CPIP MAX FF PROG TV/VIDEOA - ANTENNA - B TV VCR DVD DBS RCVR CBL AUX OK MUTEASPECTBBERECALL (According to the signal, the display may not have an aspect ratio of 4:3.)
47 Basic Operation Swapping left and right screens Example: During SPLIT SCREEN NORMAL A:5 A:3 A:5A:3 Changing the channel of the right screen A:5 A:6 Press to swap. Example: During SPLIT SCREEN NORMALPress to select the desired channel. RGB1A:5 RGB1 A:5 Example: During SPLIT SCREEN NOR MAL (RGB input) Note: Picture quality may change according to the combination of signals input to the left and right screens. Split screen SWAPPIP CH DVD/VCR CH Select desired input mode of the Right screen TV/VIDEOPress to select the desired input mode. TV Video 1* Video 2* Video 3* RGB 2* RGB 1* Comp 3* Comp 2*Comp 1* *If SKIP is set as the Input Label setting of Channel Caption, the mode will not be changed. (See page 69.)
48For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo When SEARCH/OPEN/CLOSE is pressed during single screen. When a channel button is pressed during channel search. Sound from the left screen is output from the speakers on the Device Display set. Channel search displays each channel, in order, as a paused image. Channels are dis played from the left top to the right bottom in order. When it reaches the right bottom, the next channel is displayed at the left top, overwriting the previously dis played channel. Notes: • To end channel search, press SEARCH/OPEN/CLOSE. • While using the PIP feature, Channel search is not available. • Channel search feature works with analog channels only. ATSC channel search is not possible. • When CARD and HDMI input screen is displayed, no search is possible. • Channel search feature works only if signal is from Antenna (A). SEARCHOPEN/CLOSE A:6 Example: Select channel 6 25 6 8107 25 67 10 8 (RGB input) Channel up and down buttons: When ▲ or ▼ is pressed, the next channel up or down is dis played in single screen. Number keys: Example: When 6 is pressed, channel 6 is dis played in single screen. Example 1 Example 2 Searching for the desired channel (Channel search) POWER SAP LIGHT MENU 123 456 78 09 EXIT CH CH VOL VOL R-TUNE PIP MIN REW FREEZE TV/VCR PIP SPLIT MOVE SWAPPIP CH DVD/VCR CHSEARCH OPEN/CLOSE PLAY PA U S E S T O P R E CPIP MAX FF PROG TV/VIDEOA - ANTENNA - B TV VCR DVD DBS RCVR CBL AUX OK MUTEASPECTBBERECALL
49 Advanced Op er a tion CH CH VOL VOL OK ■ Surf Mode: Select Favorite or All Channels with Remote Control ◄ VOL or VOL ►, then press OK. ■ RF Input: Select Antenna (A) or Antenna (B) with Remote Control ◄ VOL or VOL ►, then press OK. ■ Channel: Use the Remote Control ◄ VOL or VOL ► to select desired channels, then press OK to add. To delete channel, press OK again while channel number is displayed. CH CH VOL VOL OK Press MENU to display the Main Menu screen. Press to select Channel icon. Press to display the options in the Channel menu. Press to display the Favorite menu. Press to select Favorite icon. 1 2 Allows you to create a Favorite channel list from Antenna (A) or Antenna (B). CH CH VOL VOL OKPress to select each item.3 4 Press to exit menu.EXIT Favorite Surf Mode RF Input ChannelAll Channels Antenna (A) A:2-3 2-1 4-1 4-2 7-1 11-1 23-1SELECT OK CHANGE EXIT MENU to return Favorite Channel Feature POWER SAP LIGHT MENU 123 456 78 09 EXIT CH CH VOL VOL R-TUNE PIP MIN REW FREEZE TV/VCR PIP SPLIT MOVE SWAPPIP CH DVD/VCR CHSEARCH OPEN/CLOSE PLAY PA U S E S T O P R E CPIP MAX FF PROG TV/VIDEOA - ANTENNA - B TV VCR DVD DBS RCVR CBL AUX OK MUTEASPECTBBERECALL
50For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo CINEMA Note: There is little change when PICTURE is increased with a bright picture or reduced with a dark picture. 1 Press MENU to display the Main Menu screen. 2 Press to select Picture icon. Press to display the Pic ture screen. Press to select each item. Picture Adjustments STANDARD VIVID RGB IN input CH CH VOL VOL OK ■ PicMode: Lets you choose one of three pre-set Picture Modes that best suits the program you are viewing. Selecting this feature will also affect Color Te m p e r a t u r e s e t t i n g . • VIVID - This is the default mode, It provides enhanced picture contrast and sharpness for viewing in a well-lit room. • CINEMA - Select this mode for watching movies in a darkened room. It provides a soft, fi lm-like picture. • STANDARD - Recommended for normal viewing conditions with subdued room lighting. Note: Normal is displayed at default. CH CH VOL VOL OK Press re peat ed ly to select PicMode. CH CH VOL VOL OK 3 Picture PicMode STANDARD Color +32 Tint +32 Brightness +32 Picture +32 Sharpness +32 Normal Set Other AdjustSELECT OK RETURN EXIT POWER SAP LIGHT MENU 123 456 78 09 EXIT CH CH VOL VOL R-TUNE PIP MIN REW FREEZE TV/VCR PIP SPLIT MOVE SWAPPIP CH DVD/VCR CHSEARCH OPEN/CLOSE PLAY PA U S E S T O P R E CPIP MAX FF PROG TV/VIDEOA - ANTENNA - B TV VCR DVD DBS RCVR CBL AUX OK MUTEASPECTBBERECALL Picture Brightness +32 Contrast +32 RLeve +32 GLeve +32 BLeve +32 Normal Set Other AdjustSELECT CHANGE RETURN EXIT Continued on the next page.