Home > Panasonic > Recording Equipment > Panasonic Digital Disk Recorder Wj Hd200 Operating Instructions

Panasonic Digital Disk Recorder Wj Hd200 Operating Instructions

Here you can view all the pages of manual Panasonic Digital Disk Recorder Wj Hd200 Operating Instructions. The Panasonic manuals for Recording Equipment are available online for free. You can easily download all the documents as PDF.

Page 51

51
Lock/Unlock Buttons
Password Verification
When a locked button is pressed, the key locked warning
appears on the monitor for 2 seconds, then it changes to
the password prompt.
1. Enter your five-digit password using the [CAM SELECT]
buttons (1-8). The buzzer shortly beeps once, and the
entered digit changes from – to  *  on the monitor.
2. The prompt window will display KEY UNLOCKED! for
2 seconds, and the buzzer beeps twice if the correct
password is entered. 
The monitor returns to the previous...

Page 52

52 

Page 53

53
WJ-HD200
NETWORK OPERATION 

Page 54

54
System Requirements
Your personal computer must meet the following minimum requirements.
OS:
One of the following operating systems: 
Windows98 Second Edition
Windows2000
Windows Millennium Edition
WindowsXP Professional or Home Edition
Browser:
One of the following browser software: 
Microsoft Internet Explorer 5.5SP2, 6.0 
Note:The Netscape browsers are not applicable.
Display:
1 024 x 768 pixels or more
Trademarks
Microsoft, Windows, WindowsXP and Internet Explorer are either registered trademarks...

Page 55

55
Connection
System connection examples are shown.

•Connection with a Client PC via Hub

A maximum of four PCs can access the recorder at a time.
WV-CL920
Digital Disk Recorder
Camera
Personal Computer
Ethernet Cross CableOPERATEALARM
SUSPEND
RESETHDDFULLERROROSDMULTISCREEN
SELECTZOOM
TIMER
REMOTE
LOCKSEQUENCEALARM
SERCHSTOP
PLAY MODE SELECT
SETUP
/ESCPLAYTIME&DATE
SEARCHREC STOPSPOT
MULTICAMERA SELECTALARM
RECALLRECPUSH–    PAUSESET
Digital Disk Recorder WJ-HD2001
52
63
74
8DST
Super Dynamic...

Page 56

56
Main Page and Control Panel
Start your PC WWW browser. Type http://192.168.0.10/ (or
the IP Address set for WJ-HD200) / in the URL (
Uniform
Resource Locators) space.
The browser displays the 
MAIN CONTROL PANELof the
WJ-HD200 homepage as shown in the figure.
Notes:
•Specify http//:192.168.0.10/ when a client PC is con-
nected alone.
•Specify http//: (IP address previously set for the WJ-
HD200)/ such as a LAN connection.
•A maximum of four PCs can access the recorder at a
time.
About Picture...

Page 57

57
To Access Setup Menus
There are fourteen setup menus to adapt the WJ-HD200 to
your requirements.
1. On the 
Main Control Panel, click the [SETUP MENU]
button. The setup menu opens.
2. Click the buttons to open the respective windows.

TIMER SETUP:
Specifies the schedule and parameters
for timer recordings.
REC SETUP:Specifies the parameters for manual and
alarm recordings.
EXT REC SETUP:Selects optional parameters to be
applied to the recording while the switch connected
externally to the EXT REC...

Page 58

58
Program Assignment (TIMER REC)
When internal timer (INT) is selected, programs can be
assigned on a weekly and/or daily basis.
Assignable programs:PROG1 – PROG4, OFF
Programming (PROGRAM SETUP)
There are four programs, each containing four events hav-
ing a start and end time, and a recording mode.
1. Select ON or OFF for each event.
ON:Applies the schedule and mode to the program.
OFF:Does not apply.
2. Enter the start and end times.
Assignable START times:From 00:00 to 23:59
Assignable END...

Page 59

59
The status display will indicate  *→ PLAY while playing
back the images recorded with a rate different from the
preset.
•The suffix xxx following SP- is specified in REC
MODE TABLE in the ADDENDUM attached to the man-
ual.
1. Select a recording mode. Audio data will be recorded
when a mode with hyphen A is selected.
Available recording modes:SF, FQ, NQ, EX, SP, SF-
A, FQ-A, NQ-A, EX-A, and SP-A
2. When SP or SP-A is selected, specify a recording rate
(REC RATE).
Available recording rates:From 0.1 to...

Page 60

60
REC:Records the camera channel regardless of alarm
or non-alarm status.
Manual Recording Setup 
(REC SETUP)
Manual recording will take effect when OFF (not INT or EXT)
is selected in the Timer Mode Selection TIME REC window.
The parameters for alarm recording will be applied except
for the scheduled time zone if INT is selected.
Click the [REC SETUP] button on the setup control panel to
open the window.
Refer to 
Recording Mode Setup PROG1-4 SETUP, NO. 1-
4 for operating procedures and available...
Start reading Panasonic Digital Disk Recorder Wj Hd200 Operating Instructions

Related Manuals for Panasonic Digital Disk Recorder Wj Hd200 Operating Instructions

All Panasonic manuals