Home > Panasonic > Recording Equipment > Panasonic Digital Disk Recorder Wj Hd220 Operating Instructions

Panasonic Digital Disk Recorder Wj Hd220 Operating Instructions

Here you can view all the pages of manual Panasonic Digital Disk Recorder Wj Hd220 Operating Instructions. The Panasonic manuals for Recording Equipment are available online for free. You can easily download all the documents as PDF.

Overview View all the pages Comments

Page 21

21
SETUP PROCEDURES
Prior to Setup
Turning On the Power
1. Plug the power cord into the AC outlet.
2. Turn on the power switch on the rear panel. The oper-
ate LED lights up. An HDD check and a system check
will be carried out while displaying respective mes-
sages.
Power-on recording will start if TIMER has been set to
EXT in the SYSTEM SETUP menu.
3. Press the [REC STOP] button to stop power-on record-
ing, if applicable.
4. Hold down the buttons of [LOCK] and [RESET] simulta-
neously to suspend...

Page 22

22
Displaying WJ-HD220 (MAIN MENU)
1. Confirm that the camera and peripherals are connected
correctly and securely.
2. Turn on the power switches of all system components.
3. Hold down the [STOP] button for 2 seconds. The WJ-
HD220 MAIN MENU appears.
Buttons and Dials Used for Setup
[Dup] button:Moves the cursor upwards in a menu, and
opens the previous menu page.
[Cdown] button:Moves the cursor downward in a menu,
and opens the next menu page.
JogDial (Counter-clockwise):Decreases the parameter...

Page 23

23
Menu Tree
The figure shows the hierarchy of menu windows.
WJ-HD220
MAIN 
MENU
TIME
ADJUST
SETUP
VMD
SETUP
SERIAL 
PORT
SETUP
SEQUENCE
SETUP
CAMERA 
VIEW
SETUP
SYSTEM
LOGCAMERA
SYSTEM
SETUP
VMD
AREA
SETUP
MULTI
SEQ
SETUP
SPOT
SEQ
SETUP SYSTEM
SETUP
CAMERA 
TITLE DISPLAY
SETUP
EXT REC
SETUP
REC
SETUP
TIMER
REC
(Assignment)PROG1 SETUP
(Time Zone)
PROG2 SETUP
 (Time Zone)
TRIGGER
ACTION
SETUP
1 - 1
CAM REC
SETUP
1 - 1
PROG1 NO. 1
PROG1 NO. 4
NO. 1 - NO. 4 (Same as PROG1)
PROG3 SETUP
(Time Zone)NO. 1 -...

Page 24

24
Initializing
You can initialize all disk contents including image data
and/or setup data.
Initializing All Contents & Setup Data
Warning!The following are irrevocable procedures. We
strongly recommend that you copy important pic-
tures from the hard disk.
1. Press the [REC STOP] button or [STOP] button to stop
recording or playback.
2. Turn off the power.
3. Set MODE switches #1 through 4 on the rear panel as
follows:
#1:ON
#2:OFF
#3:OFF
#4:ON
4. Turn on the power.
The disk contents and setup data...

Page 25

25
Main Menu (WJ-HD220 MAIN
MENU)
The main menu is located at the top of the menu tree from
where every menu window starts.
1. Hold down the [SETUP/ESC] button for 2 seconds. The
main menu appears.
2. Select a setup menu you wish to program using the [D]
or [C] button, and press the [SET] (JogDial).
The selected setup menu opens. The following pages
will detail each setup menu.
Timer Recording Setup (TIMER
REC)
This menu assigns a timer to start recording by use of an
external timer or the internal...

Page 26

26
Set 00:00 for the start time of the initial event of the
next day.
•A combination camera will move to the preset posi-
tion if an alarm arises and the position has been
assigned beforehand in TRIGGER ACTION SETUP
of the REC SETUP menu.
4. Press the JogDial while the cursor is on SETOto open
the event programming menu.
Recording Mode Setup (PROG1-4
SETUP, NO. 1-4)
Parameters for internal timer recording are assigned to
each event (NO. 1-4) of the program (PROG 1-4) in this
menu. There are five...

Page 27

27
Post-alarm Recording (POST ALM
REC)
This setting specifies the duration of alarm recording after
an alarm input. Functions active during alarm recording are
buzzer beeping, ALARM LED indication, ALARM status
display, and the ALARM OUT signal.
1. Move the cursor to POST ALARM REC with the [D] or
[C] button.
2. Select the desired duration with the JogDial.
The default value is 10 seconds.
The unit will revert to the previous status when the time
has elapsed.
Available times (seconds):5, 10, 20, 30...

Page 28

28
3. Select the parameter with the JogDial, and press the
JogDial.
The default is REC.
REC:The channel is recorded in alarm recording, timer
recording and manual recording mode.
ALM-ONLY:The channel is recorded only when the
alarm operates.
4. Repeat steps 2 and 3 until all channels are set.
5. Press the [SETUP/ESC] button to return to the PROG1
SETUP, NO. 1 menu.
Manual Recording Setup (REC
SETUP)
The WJ-HD220 will record image and audio data either with
or without timer restrictions. Manual recording...

Page 29

29
2. Press the JogDial (SET) to validate the selection.
3. Press the [D] or [C] button to select the next item, or
press the [SETUP/ESC] button to quit the display setup.
Notes:
•When a 9-split screen is displayed, only TYPE1 24H is
available.
•If “TIME&DATE EMB.” is set to ON and a display type
except OFF is selected, the type will be embedded in
the recorded data. If OFF is selected, TYPE1 24H will
be embedded in the data.
•The embedded time and date are displayed, but the
time and date display is...

Page 30

Remote LED (REMOTE LED)
The remote LED on the front panel will indicate or ignore
the remote controlled status of the recorder via the network.
1. Select either ON or OFF with the JogDial.
The default is OFF.
ON:REMOTE LED turns on when the network controls
the recorder. 
OFF: REMOTE LED is deactivated.
2. Press the JogDial (SET) to validate the selection.
3. Press the [D] or [C] button to select the next item, or
press the [SETUP/ESC] button to quit the display setup.
Disk Check (HDD CHECK)
S.M.A.R.T....

Start reading Panasonic Digital Disk Recorder Wj Hd220 Operating Instructions

Related Manuals for Panasonic Digital Disk Recorder Wj Hd220 Operating Instructions

All Panasonic manuals