Home
>
Panasonic
>
Recording Equipment
>
Panasonic Digital Disk Recorder Wj Hd300 Series Maintenance Guide
Panasonic Digital Disk Recorder Wj Hd300 Series Maintenance Guide
Here you can view all the pages of manual Panasonic Digital Disk Recorder Wj Hd300 Series Maintenance Guide. The Panasonic manuals for Recording Equipment are available online for free. You can easily download all the documents as PDF.
Page 1
Digital Disk Recorder WJ-HD300 series S-ATA conversion guide WJ-HD309, WJ-HD316,WJ-HD309A,WJ-HD316A 1. Sept. 2008 Panasonic System Solutions
Page 2
![Page 2
1 Panasonic System Solutions HD300_SATAConversionGuide_B
WJ-HD300 S-ATA conversion guide
Maintenance guide
1. Introduction
This manual describes how to convert the hard disk drive installed in th\
e WJ-HD300 series from the P-ATA type to the S-ATA type.
Applicable models: WJ-HD309, WJ-HD316, WJ-HD309A, WJ-HD316A
2. Preparation
(1) Screwdriver
(2) S-ATA conversion kit (part number: 0E0A0027AA)
Part name Part numberQuantity
S-ATA Board Ass’y JH30AJKY6A1
S-ATA cable...](http://img.usermanuals.tech/thumb/58/72266/w300_wj-hd300_series_conversion_guide_d-1.png "Page 2
1 Panasonic System Solutions HD300_SATAConversionGuide_B
WJ-HD300 S-ATA conversion guide
Maintenance guide
1. Introduction
This manual describes how to convert the hard disk drive installed in th\
e WJ-HD300 series from the P-ATA type to the S-ATA type.
Applicable models: WJ-HD309, WJ-HD316, WJ-HD309A, WJ-HD316A
2. Preparation
(1) Screwdriver
(2) S-ATA conversion kit (part number: 0E0A0027AA)
Part name Part numberQuantity
S-ATA Board Ass’y JH30AJKY6A1
S-ATA cable...")
1 Panasonic System Solutions HD300_SATAConversionGuide_B
WJ-HD300 S-ATA conversion guide
Maintenance guide
1. Introduction
This manual describes how to convert the hard disk drive installed in th\
e WJ-HD300 series from the P-ATA type to the S-ATA type.
Applicable models: WJ-HD309, WJ-HD316, WJ-HD309A, WJ-HD316A
2. Preparation
(1) Screwdriver
(2) S-ATA conversion kit (part number: 0E0A0027AA)
Part name Part numberQuantity
S-ATA Board Ass’y JH30AJKY6A1
S-ATA cable...
Page 3
2 Panasonic System Solutions HD300_SATAConversionGuide_B
WJ-HD300 S-ATA conversion guide
Maintenance guide
(2) Disconnect the connector from the front panel.
(3) Remove four screws that fix the HDD mounting unit, and
then pull the HDD unit toward you by holding the tabs of
the angle.
(4) Remove four screws fixing the upper HDD.
Disconnect the IDE connector and power connector from
the HDD, and remove the HDD from the HDD mounting
angle....
Page 4
3 Panasonic System Solutions HD300_SATAConversionGuide_B
WJ-HD300 S-ATA conversion guide
Maintenance guide
(5) To remove the lower HDD, disconnect the power
connector from the ATA board.
Then, remove the screw A; one of the three screws fixing
the ATA board.
(6) Remove four screws fixing the lower HDD.
Disconnect the connectors from the HDD, and remove the
HDD from the HDD mounting angle.
Caution++++++++++++++++++++++++++++++++++++
When removing the screws,...
Page 5
4 Panasonic System Solutions HD300_SATAConversionGuide_B
WJ-HD300 S-ATA conversion guide
Maintenance guide
(11) Install the S-ATA board on the S-ATA angle with the three
screws removed in step (5) and step(8).
(12) Install two S-ATA HDDs in the HDD mounting angle with
four screws each.
Note: No jumper is provided on the S-ATA HDD.
Install the HDD so that the board side faces down and the
connector side faces the S-ATA board.
(13) Connect the S-ATA cables and...
Page 6
![Page 6
5 Panasonic System Solutions HD300_SATAConversionGuide_B
WJ-HD300 S-ATA conversion guide
Maintenance guide
(14) Install the HDD mounting unit with the four screws removed in step (3)\
in the reverse order of removal.
Caution ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\
++++++++++++++++++++++++++ •When installing the HDD mounting unit, remove dust around the connector that connects the HDD mounting unit the and the main unit.
Adhesion of dust...](http://img.usermanuals.tech/thumb/58/72266/w300_wj-hd300_series_conversion_guide_d-5.png "Page 6
5 Panasonic System Solutions HD300_SATAConversionGuide_B
WJ-HD300 S-ATA conversion guide
Maintenance guide
(14) Install the HDD mounting unit with the four screws removed in step (3)\
in the reverse order of removal.
Caution ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\
++++++++++++++++++++++++++ •When installing the HDD mounting unit, remove dust around the connector that connects the HDD mounting unit the and the main unit.
Adhesion of dust...")
5 Panasonic System Solutions HD300_SATAConversionGuide_B
WJ-HD300 S-ATA conversion guide
Maintenance guide
(14) Install the HDD mounting unit with the four screws removed in step (3)\
in the reverse order of removal.
Caution ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\
++++++++++++++++++++++++++ •When installing the HDD mounting unit, remove dust around the connector that connects the HDD mounting unit the and the main unit.
Adhesion of dust...
Page 7
![Page 7
6 Panasonic System Solutions HD300_SATAConversionGuide_B
WJ-HD300 S-ATA conversion guide
Maintenance guide
(17) Attach the S-ATA label, large (for top) to the top panel.
Attach the S-ATA label, small (for front) to the connectors
cover.
Note:
The new HDDs need to be formatted before operation. Refer to the Operati\
ng Instructions for detail.
+++++++++++++++++++++++++++++++++++++
End of the document+++++++++++++++++++++++++++++++++
1/5*-5
3&$450116--
650...](http://img.usermanuals.tech/thumb/58/72266/w300_wj-hd300_series_conversion_guide_d-6.png "Page 7
6 Panasonic System Solutions HD300_SATAConversionGuide_B
WJ-HD300 S-ATA conversion guide
Maintenance guide
(17) Attach the S-ATA label, large (for top) to the top panel.
Attach the S-ATA label, small (for front) to the connectors
cover.
Note:
The new HDDs need to be formatted before operation. Refer to the Operati\
ng Instructions for detail.
+++++++++++++++++++++++++++++++++++++
End of the document+++++++++++++++++++++++++++++++++
1/5*-5
3&$450116--
650...")
6 Panasonic System Solutions HD300_SATAConversionGuide_B
WJ-HD300 S-ATA conversion guide
Maintenance guide
(17) Attach the S-ATA label, large (for top) to the top panel.
Attach the S-ATA label, small (for front) to the connectors
cover.
Note:
The new HDDs need to be formatted before operation. Refer to the Operati\
ng Instructions for detail.
+++++++++++++++++++++++++++++++++++++
End of the document+++++++++++++++++++++++++++++++++
1/5*-5
3&$450116--
650...